Dell C7017T Installation Guide MSA1U MTA1U LSA1U LTA1U-I
Dell C7017T Manual
![]() |
View all Dell C7017T manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell C7017T manual content summary:
- Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 1
INSTALLATION INSTRUCTIONS MSA1U MTA1U LSA1U LTA1U FUSION MEDIUM AND LARGE FLAT PANEL MOUNTS MSA1U/MTA1U/LSA1U/LTA1U - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 2
LSA1U/LTA1U. WARNING: Use this mounting system only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. WARNING: Never operate this mounting system if it is damaged. Return the mounting system to a service center for examination and - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 3
Installation Instructions DIMENSIONS MSA1U/MTA1U/LSA1U/LTA1U MSA1U 6.00 152.4 RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET 1. MAXIMUM MOUNTING PATTERN IS 22.7" (576 mm) WITHOUT REVERSING UPRIGHTS 2. MAXIMUM MOUNTING PATTERN IS 25.3" (642 mm) WITH REVERSING UPRIGHTS 3. FOR RECESSED APPLICATIONS, - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 4
--continued 1.45 36.9 6.00 152.4 Installation Instructions LSA1U 15.00 381.0 6.00 152.4 16.00 406.3 MINIMUM UPRIGHT SPACING RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET 1. MAXIMUM MOUNTING PATTERN IS 31.25" (794 mm) WITHOUT REVERSING UPRIGHTS 2. MAXIMUM MOUNTING PATTERN IS 34.6" (879 mm) WITH - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 5
Installation Instructions LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 6
MSA1U/MTA1U/LSA1U/LTA1U TOOLS REQUIRED FOR INSTALLATION Installation Instructions 7/32" (5.5mm) Wood Stud 3/8" (9.5mm) Concrete #2 3/16" x Nesting spacer] MB (4) [Universal washer] MSA1/LSA1 Mount Hardware Kit MTA1/LTA1 Mount Hardware Kit Wall Mounting Hardware Kit N (4) P (4) 5/16 x - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 7
to which the mount is being attached is capable of supporting five times the combined weight of all components located on the mount, not to upper mounting slots. (See Figure 1) Center of screen 7" (177.8mm) 5. Using a level, mark the wall on each stud to attach the mount through the upper mounting - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 8
Instructions Installing to a Concrete Wall 1. Determine the center of the TV screen, and where it should be located on the wall. 2. Line up the diamond shapes on mount (Z) with center of screen . 6. Install an anchor (P) into each pilot hole using a hammer, making sure that the anchor is flush with - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 9
Installation Instructions MSA1U/MTA1U/LSA1U/LTA1U NOTE: The nesting spacers (MA) may be used separately, or put two together in bracket. f. Switch the right interface bracket to the left side of the wall mount. g. Repeat Steps 3c through 3f with the left interface bracket. 3d 3e [Brackets - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 10
LSA1U/LTA1U Attaching Screen to Wall Mount NOTE: NEVER place both interface brackets (V and W or X and Y) to one side of the wall mount center line! ( 8) Center Line (CL) Installation Instructions NEVER place both interface brackets to one side of the wall mount center line (CL)! Both interface - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 11
and hang top hook of interface brackets (X and Y) onto the top rail of the mount (Z). (See Figure 9) NOTE: The screen initially installs into the "service mode" to allow easy cable access. 2. Adjust screen and rails to desired viewing position. 3. Route cables between wall and rails. CAUTION: PINCH - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 12
The screen may also be adjusted along rails side to side. NOTE: NEVER place both interface brackets (V and W or X and Y) to one side of the wall mount required. (See Figure 11) 3. The tilt may be locked at 0°, 6° or 12° using one 1/4-20 x 1" round head carriage bolt (T) and one 1/4-20 hex nut (U) - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 13
Installation Instructions Locking Screen Interface Brackets (Optional) 1. Lock screen interface brackets onto mount rails using one 3/8-16 x 3/4" set screw (S) on each interface bracket. (See Figure 12) 1 (S) x 2 (MSA1U / LSA1U) (back view) MSA1U/MTA1U/LSA1U/LTA1U Locking Mount (Optional) 1. Add - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 14
MSA1U/MTA1U/LSA1U/LTA1U Installation Instructions 14 - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 15
Installation Instructions MSA1U/MTA1U/LSA1U/LTA1U 15 - Dell C7017T | Installation Guide MSA1U MTA1U LSA1U LTA1U-I - Page 16
MSA1U/MTA1U/LSA1U/LTA1U Installation Instructions Chief, a products division of Milestone AV Technologies 8800-002649 Rev04 2016 Milestone AV Technologies www.chiefmfg.com 01/16 USA/International Europe Asia Pacific A 6436
![](/manual_guide/products/dell-c7017t-installation-guide-msa1u-mta1u-lsa1u-lta1ui-e1e0546/1.png)
INSTALLATION INSTRUCTIONS
LSA1U
MTA1U
LTA1U
MSA1U
FUSION MEDIUM AND LARGE
FLAT PANEL MOUNTS
MSA1U/MTA1U/LSA1U/LTA1U