Dell D7523QT D7532QT Monitor Teardown Instructions

Dell D7523QT Manual

Get Dell D7523QT PDF manuals and user guides View all Dell D7523QT manuals
Add to My Manuals
Save this manual to your list of manuals

Dell D7523QT manual content summary:

  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 1
    Mechanical Instruction Disassembly Procedures: Step Figure S1. Remove the Package_Buckles and open the carton. Remark Remove he 6 pcs Package_Buckles, then use a proper tool to open the carton.
  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 2
    Step S3. Before disassembly S4. Remove the Rear cover Figure Remark Turn off power, Unplug external cables from product Use a Philips-head screwdriver to remove 8 screws for removing the DIE-CASTING. (No.1~8 screw size=M4x10; Torque=12±2kgf.cm) Use a Philips-head screwdriver to remove 17 screws
  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 3
    S5. Tear off the tapes,clips and disconnect all of the connectors S6. Remove the Main board， Power board ,OPS board, Converter board,etc Use a Philips-head screwdriver to remove 29 screws for removing the Main board，Power board ,OPS board, Converter board. (No.1~23 screw size=M3x8 Torque= 4±1kgf.cm
  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 4
    S7. Remove the BKT S8. Remove the Speakers，I/O board,Key board Use a hexagonal screwdriver to remove 7 screws. (No.1~2 hex screw; size=M3x8 Torque=4±1kgf.cm) (No.3~5 hex screw; size=M3x5 Torque=4±1kgf.cm) (No.6~7 screw; Torque=4.5±0.5kgf.cm ) Use a Philips-head screwdriver to remove 5 screws for
  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 5
    S9. Remove the Speaker BKT No.1~4 screw size=M3x6 Torque=4±1kgf.cm) Use a Philips-head screwdriver to remove 4 screws for removing the Speaker BKT (No.1~4 screw size=M4x5 Torque=6±1kgf.cm
  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 6
    Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing PCB/PCT) Mercury containing components Batteries
  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 7
    Step Remove the big capacitors Figure Remark Remove electrolyte capacitors (red mark) from printed circuit boards Take out bulk cap. pin solder with soldering iron and absorber Lift the bulk cap up and take it away from the PCB
  • Dell D7523QT | D7532QT Monitor Teardown Instructions - Page 8
    Tools Required List the type and size of the tools that would typically can be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description: - Phillip-head Screwdriver - Hexagonal Screwdriver - Penknife - Soldering iron and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Mechanical Instruction
Disassembly Procedures:
Step
Figure
Remark
S1. Remove the
Package_Buckles
and open the
carton.
Remove he 6 pcs
Package_Buckles, then
use a proper tool to
open the carton. Uplift
the
top
paper-box
slowly.
Remove
the
EPS-TOP
and
accessories
PE
bag(remote
control
and
battery(AA*2),
stylus*2pcs,
Power
cable(varies
by
contries),
HDMI
2.0
cable, DP 1.2 cable,
USB
3.1
Gen
1
upstream cable, Wire
Saddle *5 pcs and
QSG.
S2. Remove the
desiccants
Take out 4pcs desiccant
from the bag. Use a
machine jip to take out
the whole monitor from
EPS-bottom. Remove
the PE bag from top to
bottom, and put the
monitor on ESD
protection foam.
Desiccant *2
Desiccant *2