Dell E2722H Monitor Teardown Instructions

Dell E2722H Manual

Get Dell E2722H PDF manuals and user guides View all Dell E2722H manuals
Add to My Manuals
Save this manual to your list of manuals

Dell E2722H manual content summary:

  • Dell E2722H | Monitor Teardown Instructions - Page 1
    8. Mechanical Instruction 8.1.1Disassembly Procedures（E2722H） Tools: 2 Power screwdrivers (φ=5mm, L=60mm); 1 small press the hidden button and pull out the stand. Remove the Base ass'y. Note: Put the monitor on a flat, soft and clean surface. Unscrew the 4 screws by the Philips-head Screwdriver
  • Dell E2722H | Monitor Teardown Instructions - Page 2
    Disconnect the cables Remove the mainframe Remove the connectors and tapes Unscrew the two screws on the two sites of mainframe remove the mylar on the powerboard 56
  • Dell E2722H | Monitor Teardown Instructions - Page 3
    Remove the mainboard and power board Unscrew the screws on the boards Unscrew the two Hexagonal screws Mainboard and powerboard panel 8.1.2Disassembly Procedures（E2722HS） Step Figure TOOL Remark 57
  • Dell E2722H | Monitor Teardown Instructions - Page 4
    Remove the Base ass'y. Remove the rear cover Unscrew the screw loosely by hand and pull out the stand. Note: Put the monitor on a flat, soft and clean surface. Unscrew the 4 screws by the Philips-head Screwdriver and insert the scraper into the button site to open the
  • Dell E2722H | Monitor Teardown Instructions - Page 5
    Remove the mainframe Remove the mainboard and power board Remove all the aluminum foil and the cable connectors and Unscrew the two screws on the two sites of mainframe remove the mylar on the powerboard Unscrew the screws on the boards 59
  • Dell E2722H | Monitor Teardown Instructions - Page 6
    Unscrew the two Hexagonal screws Mainboard and powerboard panel 8.2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors /
  • Dell E2722H | Monitor Teardown Instructions - Page 7
    Gas discharge lamps LCD display > 100 cm2 External electric cable Component contain refractory ceramic fibers Component contain radio-active substances Electrolyte capacitors (height > 25mm, diameter > 25mm) No used Product has an LCD greater than 100 cm2 Product has external cables No used No used
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
55
8. Mechanical Instruction
8.1.1Disassembly Procedures
（
E2722H
）
Tools: 2 Power screwdrivers (φ=5mm
, L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=6 kgF.Cm
Step
Figure
TOOL
Remark
Remove the
Base ass’y.
Use the tip of the
screw
driver
to
press
the
hidden
button and pull out
the stand.
Note:
Put the monitor on a
flat, soft and clean
surface.
Unscrew the 4
screws by the
Philips-head
Screwdriver.
Remove the
rear cover
Unscrew the 4
screws by the
Philips-head
Screwdriver and
insert the scraper
into the button site
to open the rear
cover