Dell OptiPlex Micro 7020 Windows 10 IoT Enterprise LTSC 2021 Operating System
Dell OptiPlex Micro 7020 Manual
![]() |
View all Dell OptiPlex Micro 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell OptiPlex Micro 7020 manual content summary:
- Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 1
Windows 10 IoT Enterprise LTSC 2021 Operating System Recovery Guide July 2023 Rev. A00 - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 2
and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2023 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 3
Contents Chapter 1: Steps to configure USB key for ISO Imaging 4 Step 1: Pre-requisites:...4 Step 2: Download and install the Dell OS Recovery Tool 4 Chapter 2: Re-Imaging or Deploying the recovery image created in a USB drive 8 Chapter 3: Capturing image to the created USB drive 11 Contents 3 - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 4
ISO Imaging Step 1: Pre-requisites: Steps 1. Download the appropriate Windows 10 IoT Enterprise LTSC 2021 operating system ISO image from Dell Support page. 2. Download and install the Dell OS Recovery Tool (available for Microsoft Windows only). 3. USB flash drive with at least 32 GB of free space - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 5
Figure 2. Dell USB Recovery Tool Application 3. Click SWITCH TO ADVANCED RECOVERY. Figure 3. OS Recovery Tool 4. Browse to and select the appropriate downloaded ISO image and click NEXT. Steps to configure USB key for ISO Imaging 5 - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 6
Figure 4. OS Recovery Tool 5. Click BURN OS. Figure 5. OS Recovery Tool 6. Wait for image registration to complete and click Close. 6 Steps to configure USB key for ISO Imaging - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 7
Figure 6. OS Recovery Tool Figure 7. OS Recovery Tool 7. Remove the USB drive. This completes the Recovery USB drive creation. Steps to configure USB key for ISO Imaging 7 - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 8
USB port of the appropriate device. 2. Power on the device. 3. Press F2 to enter BIOS setup to unlock the BIOS for any required changes. Dell default password is Fireport. NOTE: The screenshots Integrated Devices and enable the Enable USB boot support option. This option is enabled by default. - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 9
Figure 9. Storage, SATA/NVMe Operations 7. Go to Virtualization Support, set Enabler Pre-Boot DMA Support to OFF, set Enable OS Kernel DMA Support to OFF. Figure 10. Vitalization Support 8. Click Save and then click Exit. 9. When the device reboots, press F12 to trigger the Boot Menu and select the - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 10
Figure 11. Boot Menu 10. Select the operating system image and click OK. The installation process starts. Figure 12. USB Imaging tool The image that is shown above is an example image. The screen reflects the image that you created in the USB pen drive. 11. After the installation is completed, the - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 11
image to the created USB drive Steps 1. Insert the Windows 10 IoT OS Recovery USB Key created into the USB port of the appropriate device. 2. Power on the device. 3. When the device reboots, press F12 to trigger the Boot Menu and select the bootable Windows 10 IoT OS Recovery USB Key - Dell OptiPlex Micro 7020 | Windows 10 IoT Enterprise LTSC 2021 Operating System - Page 12
Figure 15. Compressing and Pulling Image to USB drive Image Capturing starts and displays the progress screen. 7. After the image capture is completed, remove the bootable Windows 10 IoT OS Recovery USB Key and click Restart. Figure 16. USB Imaging tool screen 12 Capturing image to the created
![](/manual_guide/products/dell-optiplex-allinone-7420-windows-10-iot-enterprise-ltsc-2021-operating-recovery-guide-15cedcc/1.png)
Windows 10 IoT Enterprise LTSC 2021
Operating System
Recovery Guide
July 2023
Rev. A00