Dell P2422HA Monitor Teardown Instruction

Dell P2422HA Manual

Get Dell P2422HA PDF manuals and user guides View all Dell P2422HA manuals
Add to My Manuals
Save this manual to your list of manuals

Dell P2422HA manual content summary:

  • Dell P2422HA | Monitor Teardown Instruction - Page 1
    DELL P2422HA 1 1. Disassembly Procedures S1 Turn off the monitor. S2 To remove the stand Place the monitor on a soft cloth or cushion at the edge of the desk. S4 Pull out CTRL FFC from I/F BD to take off Rear Cover Press and hold the stand release button at the back of the display. Lift the
  • Dell P2422HA | Monitor Teardown Instruction - Page 2
    S6 Tear off tape from USB BD FFC Pull out USB FFC from USB BD Unlock 1 screw on USB BD Disassemble USB BD from Middle Frame DELL P2422HA 2 S9 Tear off two tapes from Main SHD to disassemble Main SHD from panel S10 Pull out LVDS cable and take off Main SHD from panel (Screw Torque: 4.5±0.5kgf)
  • Dell P2422HA | Monitor Teardown Instruction - Page 3
    DELL P2422HA 3 S12 Disassemble Middle Frame and Bezel Chin from Panel S15 Unlock 7 PCB screws and 2 hex screws S13 Pull out Backlight Wire from panel (Screw Torque-PCB: 8.5±1kgf) (Screw Torque-Hex: 5±0.6kgf) S16 Disassemble I/F BD, CVAA BD and SPS BD from Main SHD Tear off yellow tape from
  • Dell P2422HA | Monitor Teardown Instruction - Page 4
    DELL P2422HA 4 S18 Remove electrolyte capacitors (red mark) from printed circuit boards S18-1 Cut the glue between bulk cap. and PCB with a knife S18-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB
  • Dell P2422HA | Monitor Teardown Instruction - Page 5
    DELL P2422HA 5 S18-3 Take out bulk cap. pin solder with soldering iron and absorber S18-4 Lift the bulk cap. up and away from the PCB
  • Dell P2422HA | Monitor Teardown Instruction - Page 6
    DELL P2422HA 6 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing PCB/PCT) Mercury containing
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
1
DELL P2422HA
1. Disassembly Procedures
S1
Turn off the monitor.
S2
To remove the stand
Place the monitor on a soft cloth or
cushion at the edge of the desk.
Press and hold the stand release button
at the back of the display.
Lift the stand assembly up and away
from the monitor.
S3
Unlock 4 RC screws
Disassemble Rear Cover from Middle
Frame according to the sequence
shown in the picture
(Screw Torque: 9±1kgf)
S4
Pull out CTRL FFC from I/F BD to take
off Rear Cover
S5
Tear off 1 tape from CTRL BD FFC on
Rear Cover
Unlock 3 screws to disassemble CTRL
BD from Rear Cover
(Screw Torque: 1.4±0.1kgf)