Dell P3424WE Monitor Teardown Instructions

Dell P3424WE Manual

Get Dell P3424WE PDF manuals and user guides View all Dell P3424WE manuals
Add to My Manuals
Save this manual to your list of manuals

Dell P3424WE manual content summary:

  • Dell P3424WE | Monitor Teardown Instructions - Page 1
    DELL P3424WEB 1 1. Disassembly Procedures S1 Turn off power S2 To remove the stand Place the monitor on U3415W Curve Sponge Jig S5 Unplug "CTRL BD FFC" from I/F BD Press and hold the stand release button at the back of the display. Lift the stand up and away from the monitor. S6 Tear off 1
  • Dell P3424WE | Monitor Teardown Instructions - Page 2
    DELL P3424WEB 2 S8 Tear off Mylar from CTRL BD (See yellow mark) Unplug "CTRL BD FFC" from CTRL BD S10 Tear off a gasket from panel (See yellow mark) Tear off 2 tapes from backlight wires (See blue mark) Unplug backlight wires from LED Driver BD (See red mark) Unlock 13 MF screws S9 Unplug
  • Dell P3424WE | Monitor Teardown Instructions - Page 3
    DELL P3424WEB 3 S12 Unlock 4 screws to disassemble Main SHD S16 Unplug short backlight wire from panel (Screw Torque: 4.0-4.5 Kgf) S13 Tear off 1 acetate tape and 1 yellow tape from EDP FFC S17 Tear off logo from panel S18 Disassemble Mylar from SHD S14 Unplug EDP FFC from panel Take off
  • Dell P3424WE | Monitor Teardown Instructions - Page 4
    S20 Disassemble I/F BD from Main SHD and unplug SPS BD wire from I/F BD Tear off 1 tape from EDP FFC and unplug EDP FFC from I/F BD Disassemble LED Driver BD from Main SHD and unplug "WIRE 8P/8P" from LED Driver BD Disassemble SPS BD from Main SHD and unplug "WIRE 8P/8P" from SPS BD DELL
  • Dell P3424WE | Monitor Teardown Instructions - Page 5
    DELL P3424WEB 5 S21 Remove electrolyte capacitors (red mark) from printed circuit boards S21-1 Cut the glue between bulk cap. and PCB with a knife S21-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB
  • Dell P3424WE | Monitor Teardown Instructions - Page 6
    DELL P3424WEB 6 S21-3 Take out bulk cap. pin solder with soldering iron and absorber S21-4 Lift the bulk cap. up and away from the PCB
  • Dell P3424WE | Monitor Teardown Instructions - Page 7
    DELL P3424WEB 7 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing PCB/PCT) Mercury containing
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
1
DELL P3424WEB
1. Disassembly Procedures
S1
Turn off power
S2
To remove the stand
Place the monitor on U3415W Curve
Sponge Jig
Press and hold the stand release button
at the back of the display.
Lift the stand up and away from the
monitor.
S3
Unlock 4 screws
(Screw Torque: 11±1Kgf)
S4
Use hands or scraper bar to
disassemble Rear Cover from the
monitor.
Notice the disassembly order:
Left Side=> Top Side=>Right
Side=>Bottom Side
S5
Unplug “CTRL BD FFC” from I/F BD
S6
Tear off 1 tape from “CTRL BD FFC”
Tear off “CTRL BD FFC” from Rear
Cover
S7
Unlock 3 screws from CTRL BD and
disassemble CTRL BD from Rear Cover
(Screw Torque: 1.5-2.0 Kgf)