Dell P3424WEB Curved Video Conferencing Monitor Teardown Instructions

Dell P3424WEB Manual

View all Dell P3424WEB manuals Add to My Manuals Save this manual to your list of manuals

• 
  1
• 
  2
• 
  3
• 
  4
• 
  5
• 
  6

Match case Limit results 1 per page

---

100% Actual Size Fit Width Fit Height Fit Page Automatic

1

DELL P3424WEB

Unplug external cables(power cable and video

cable) from the monitor.

S2

Turn off power..

1.

Disassembly Procedures:

S1

Remove stand from the product.(Press the stand

release button, lift the stand up and away from the

monitor)

S3

S4

S5

S6

S7

Use a Philips-head screwdriver to remove 4pcs

screws for unlocking mechanisms. Remove DP cap.

(No.1~4 screw size=M4x11; Torque=11

±

1kgfxcm)

2

3

4

1

Wedge your fingers between rear cover and the

middle bezel on the corners of the top side of the

monitor to release the rear cover, then use one hand

to press the middle bezel, the other hand to pull up

carefully the rear cover in order of arrow preference

for unlocking mechanisms of rear cover.

3

2

1

2

Lift the rear cover up and tear off 1pc aluminum foil,

then disconnect the joystick key cable from the

connector of the main board, and then remove the

rear cover and put it aside for later disassembling.

Use a Philips-head screwdriver to remove 2pcs screw

for unlocking the USB board, then tear off all the tapes

and release the joystick cable.

(No.1~2 screw size=M2x3.3, Torque=1

±

0.2

kgfxcm)

2

1