Dell P6524QT Monitor Teardown Instructions
Dell P6524QT Manual
 |
View all Dell P6524QT manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell P6524QT manual content summary:
- Dell P6524QT | Monitor Teardown Instructions - Page 1
1. Disassembly Procedures: S1 Turn off power.. DELL P6524QT 1 Tear off 1pcs conductive tape for releasing main board, USB board and LVDS cable. Remove 2pcs S5 white mylar tapes. Unplug external cables(power cable and video S2 cable) from the monitor. Remove 5pcs white tapes, 2pcs big black wire - Dell P6524QT | Monitor Teardown Instructions - Page 2
2 DELL P6524QT Use a Hex-head screwdriver to remove 2pcs screws for unlocking RS232 connectors. (Torque: 4.5kgf±0.5) Use a screwdriver to remove 12pcs screws for S9 unlocking the USB board, IO holder and main board, remove 17pcs screws for locking the power board, driver board, touch board and T- - Dell P6524QT | Monitor Teardown Instructions - Page 3
Remove all the bezel and strips and put them on a protective cushion. Open the IR board cover, then use a screwdriver to remove 2pcs screws for S16 unlocking the IR board and holder with front bezel, then use a screwdriver to remove 2pcs screws for unlocking the light pipe with front bezel. (Torque: - Dell P6524QT | Monitor Teardown Instructions - Page 4
4 DELL P6524QT S20 Use a ED holder fixture to fix the ED holders, then tear off all the tapes and rubbers, then lift up the ED holder unit for removing the ED unit, and then put the unit on a protective cushion. Tear off the tape, then disconnect the L/B cable from the connector, then tear off - Dell P6524QT | Monitor Teardown Instructions - Page 5
Remove electrolyte capacitors (red mark) from S25 printed circuit boards. DELL P6524QT 5 S25-4 Take out bulk cap. pin solder with soldering iron and absorber. S25-1 Cut the glue between bulk cap. and PCB with a knife. S25-5 Lift the bulk cap. up and away from the PCB. S25-2 Ensure cutting path - Dell P6524QT | Monitor Teardown Instructions - Page 6
6 DELL P6524QT 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
1
DELL P6524QT
Unplug external cables(power cable and video
cable) from the monitor.
S2
Turn off power..
1.
Disassembly Procedures:
S1
Remove 57pcs screws for unlocking the rear cover
with the assembled unit.(
Torque: 3
±
0.3kgf)
Use a screwdriver to remove 8pcs screws for
releasing the handles.
(Torque:15
±0.5kgf)
S3
Remove the handles and rear cover, then use a
screwdriver to remove 7pcs screws for releasing the
PC box.
(Torque: 4.5
±
0.3kgf)
S4
S5
Tear off 1pcs conductive tape for releasing main
board, USB board and LVDS cable. Remove 2pcs
white mylar tapes.
S6
Remove 5pcs white tapes, 2pcs big black wire locks,
2pcs small black wire locks and 6pcs white wire locks
for unfixing the cables as the picture below shown.
Disconnect all the cables as the picture below shown.
Use a screwdriver to remove 2pcs screws for
unlocking AC power outlet.
(Torque: 4.5
±
0.5kgf)
S7
Use a screwdriver to remove 4pcs screws for
unlocking the two speakers.
(Torque:
4.5kgf
±
0.5)
S8
1
2
3
5
7
6
8
4
6
9
9
10
8
10
11
22
12
13
14
20
21
IR cable
15
18
16
19
17
23
key cable