Dell P8624QT Monitor Teardown Instructions
Dell P8624QT Manual
 |
View all Dell P8624QT manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell P8624QT manual content summary:
- Dell P8624QT | Monitor Teardown Instructions - Page 1
1. Disassembly Procedures: S1 Turn off power.. DELL P8624QT 1 Paste 1pcs for fixing the cable as the picture below shown. Remove 16pcs acetate tapes(size: 80mm) S5 and 1pcs acetate tapes(size: 60mm) for unfixing the cables as the picture below shown. Unplug external cables(power cable and video - Dell P8624QT | Monitor Teardown Instructions - Page 2
2 DELL 8624QT Use a Hex-head screwdriver to remove 2pcs screws for unlocking VGA connectors. (Torque: 4.5kgf±0.5) Use a screwdriver to remove 12pcs screws for S9 unlocking the USB board, IO holder and main board, remove 17pcs screws for locking the power board, driver board, touch board and T-Con - Dell P8624QT | Monitor Teardown Instructions - Page 3
Tear off 16pcs conductive foams on the specific position of the COF of the SB, then tear off all the S16 tape and foams, and release the O/C SB away from the back bracket. DELL P8624QT 3 Turn over the panel module with the bracket for screen faced up. Use a thin film(such as Prism film) S17 to - Dell P8624QT | Monitor Teardown Instructions - Page 4
4 DELL P8624QT S20 Use a screwdriver to remove 8pcs screws for unlocking the two bracket with the bottom ED holder. (Torque: 3±0.3kgf) Use a screwdriver to remove18pcs screws for S24 unlocking the two VESA brackets with back bracket.(Torque: 5±0.5kgf) S21 Tear off 16pcs acetate tapes, then use - Dell P8624QT | Monitor Teardown Instructions - Page 5
Remove electrolyte capacitors (red mark) from S25 printed circuit boards. DELL P8624QT 5 S25-4 Take out bulk cap. pin solder with soldering iron and absorber. S25-1 Cut the glue between bulk cap. and PCB with a knife. S25-5 Lift the bulk cap. up and away from the PCB. S25-2 Ensure cutting path - Dell P8624QT | Monitor Teardown Instructions - Page 6
6 DELL P8624QT 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
1
DELL P
86
24QT
Unplug external cables(power cable and video
cable) from the monitor.
S2
Turn off power..
1.
Disassembly Procedures:
S1
S3
Remove the handles and rear cover, then use a
screwdriver to remove 7pcs screws for releasing the
PC box.
(Torque: 4.5
±
0.3kgf)
S4
Use a screwdriver to remove 16pcs screws for
releasing the handles.
Remove
(Torque:15
±0.5kgf)
6pcs screws for unlocking IO hing with rear cover.
(Torque:3
kgf)
±
0.3
Remove 69pcs screws for
unlocking the rear cover(
.
Torque: 3
±
0.3kgf)
Paste 1pcs
for fixing the cable as the picture below
shown. Remove 16pcs acetate tapes(size: 80mm)
and 1pcs acetate tapes(size: 60mm) for unfixing the
cables as the picture below shown.
S5
Tear off 2pcs conductive tape for releasing main
board, USB board and LVDS cable. Remove 3pcs
shading fabric tapes on the holes of L/B
(marked
green)
. Remove 4pcs acetate tapes on the holes of
the back bracket.
(marked yellow)
S6
Disconnect all the cables as the picture below shown.
Use a screwdriver to remove 2pcs screws for
unlocking AC power outlet.
(Torque: 4.5
±
0.5kgf)
S7
Use a screwdriver to remove 8pcs screws for
unlocking the two speakers.
(Torque:
4.5kgf
±
0.5)
S8
2
1
3
7
5
6
4
8
4
28
11
29
11
12
16
13
15
14
17
18
19
20
21
22
24
23
25
26
27
28
29