Dell PowerApp .cache 100 Accessing the Event Log With Dell PowerApp Event
Dell PowerApp .cache 100 Manual
View all Dell PowerApp .cache 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerApp .cache 100 manual content summary:
- Dell PowerApp .cache 100 | Accessing the Event Log
With Dell PowerApp Event - Page 1
to view the text file, or to e-mail the text file to technical support for troubleshooting (if needed). If there are no entries in the text file, the event with your PowerApp system, or the tool can be downloaded at http://support.dell.com. NOTICE: Make sure that the diskette is not write protected - Dell PowerApp .cache 100 | Accessing the Event Log
With Dell PowerApp Event - Page 2
(Rev. 4/26/00) FILE LOCATION: S:\SYSTEMS\Razor\ts\eventvwr\918hj\918HJem0.fm 3. Restart your system. The system boots and copies the Event Log to a text file named log.txt on the diskette. The last two entries in the Event Log appear on the screen. You are prompted to press to view the contents
0918HJ A00
(Rev. 04/26/00)
FILE LOCATION:
S:\SYSTEMS\Razor\ts\eventvwr\918hj\918HJem0.fm
DELL CONFIDENTIAL - PRELIMINARY
5/5/00
™
P/N 918HJ Rev. A00
May 2000
www.dell.com
Accessing the Event Log With the
Dell™ PowerApp™ Event Log
Viewer
The PowerApp Event Log Viewer is a tool designed to view the last few errors in the
Event Log. When you boot your computer with the
PowerApp Event Log Viewer
dis-
kette, the system copies the contents of the Event Log into a text file named
log.txt
on the diskette. The diskette can then be inserted into another system to view the
text file, or to e-mail the text file to technical support for troubleshooting (if needed). If
there are no entries in the text file, the event log is empty.
A file named
log.ekd
may also be copied to the diskette during boot. This file can be
ignored.
To access the Event Log Viewer, perform the following steps:
1.
Power down your PowerApp appliance.
2.
Insert the
PowerApp Event Log Viewer
diskette into the diskette drive.
NOTE: The PowerApp Event Log Viewer
diskette is included with your PowerApp
system, or the tool can be downloaded at
.
NOTICE: Make sure that the diskette is not write protected before
inserting it into the diskette drive.