Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS Message Reference
Dell PowerConnect Brocade M6505 Manual
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerConnect Brocade M6505 manual content summary:
- Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 1
53-1002749-01 ® 14 December 2012 Fabric OS Message Reference Supporting Fabric OS v7.1.0 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 2
concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes visit http://www.brocade.com/support/oscd. Brocade Communications Systems, Incorporated Corporate and Latin American Headquarters Brocade Communications Systems, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 3
1000046-02 Minor updates to a few messages. Reference Manual June 2006 Fabric OS Message Reference 53-1000242-01 Updated -Deleted USWD chapter. -Updated Introductory chapters. -Updated throughout: rebranding, supported hardware, CLI changes. June 2007 Fabric OS Message Reference 53-1000600-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 4
Title Fabric OS Message Reference Fabric OS Message Reference Fabric OS Message Reference Fabric OS Message Reference Publication Summary of changes Date number 53-1001157-01 Updated for Fabric OS v6.2.0: -Revised and added new messages to FSS, KSWD, CTAP, CNM, CVLM, EM, FABR, FCIP, FW, HIL, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 5
Title Fabric OS Message Reference Fabric OS Message Reference Fabric OS Message Reference Publication Summary of changes Date number 53-1002149-01 Updated for Fabric OS v7.0.0: -Added new chapters: C3, CAL, MCAST_SS, RTE, and VS. -Added new messages: AG, AN, ANV, BL, C2, CDR, CCFG, ECC, EM, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 6
- Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 7
About This Document How this document is organized xiii Supported hardware and software xiii What's new in this document xviii Key terms xix Notice to the reader xix Additional information xix Brocade resources xix Other industry resources xix Getting technical help xx Document feedback - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 8
message 23 Reading an Audit message 24 Responding to a system message 26 Looking up a system message 26 Gathering information about the problem 26 Support 27 System module descriptions 28 Log Messages Audit Messages FFDC Messages Fabric OS System Messages AG Messages 121 AN Messages 136 ANV - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 9
Fabric OS Message Reference 53-1002749-01 AUTH Messages 144 BKSW Messages 162 BL Messages 163 BLS Messages 180 BM Messages 182 C2 Messages 187 C3 Messages 194 CAL Messages 202 CCFG Messages 203 CDR Messages 207 CHS Messages 214 CNM Messages 216 CONF Messages 239 CTAP Messages 244 CVLC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 10
FW Messages 438 HAM Messages 541 HAMK Messages 546 HIL Messages 548 HLO Messages 565 HMON Messages 567 HSL Messages 568 HTTP Messages 571 IBD Messages 572 IPAD Messages 573 IPS Messages 575 ISNS Messages 578 KAC Messages 582 KSWD Messages 587 KTRC Messages 588 L2SS Messages 590 L3SS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 11
PORT Messages 657 PS Messages 660 PSWP Messages 664 RAS Messages 667 RCS Messages 672 RKD Messages 677 RMON Messages 679 RPCD Messages 680 RTE Messages 683 RTWR Messages 684 SCN Messages 686 SEC Messages 688 SFLO Messages 771 SNMP Messages 774 SPC Messages 777 SPM Messages 790 SS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 12
xii Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 13
here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for Fabric OS v7.1.0, documenting all possible - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 14
platforms are supported by this release of Fabric OS: • Brocade 300 • Brocade 5100 • Brocade 5300 • Brocade 5410 • Brocade 5424 • Brocade 5430 • Brocade 5450 • Brocade 5460 • Brocade 5470 • Brocade 5480 • Brocade 6505 • Brocade 6510 • Brocade 6520 • Brocade 7800 • Brocade 8000 • Brocade Encryption - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 15
What's new in this document The following changes have been made since this document was last released: • The lookup lists in Chapter 2 through Chapter 4 provide hyperlinks to messages by type (LOG, Audit, and FFDC). • Information that was added: - AG Messages - ANV Messages - BL Messages - C2 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 16
• Information that was changed: - AN Messages - AUTH Messages - BL Messages - C2 Messages - C3 Messages - CDR Messages - CAL Messages - CNM Messages - DOT1 Messages - FABR Messages - FCOE Messages - FCPD Messages - FCR Messages - FICU Messages - FSPF Messages - FSS Messages - HIL Messages - HSL - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 17
titles code text Identifies CLI output Identifies command syntax examples For readability, command names in the narrative portions of this guide are presented in mixed lettercase: for example, switchShow. In actual examples, command lettercase is all lowercase. Command syntax conventions Command - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 18
, and sample output, see the Fabric OS Command Reference. Notes, cautions, and warnings The following notices and statements are used in this manual. They are listed below in order of increasing severity of potential hazards. NOTE A note provides a tip, guidance, or advice, emphasizes important - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 19
and Fibre Channel, see the technical glossaries on MyBrocade. See "Brocade resources" on page xix for instructions on accessing MyBrocade. For definitions of SAN-specific terms, visit the Storage Networking Industry Association online dictionary at: http://www.snia.org/education/dictionary Notice - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 20
support supplier for hardware, firmware, and software support problem, including the switch or fabric behavior immediately following the problem, and specific questions • Description of any troubleshooting and directly above the cable management comb. • Brocade DCX-4S and DCX 8510-4-On the non-port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 21
an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number of the document and as much detail as possible about your comment, including the topic heading and page - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 22
xxii Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 23
Responding to a system message 26 •System module descriptions 28 Overview of system messages This guide supports Fabric OS v7.1.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized alphabetically by module name. A module is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 24
to "Displaying system message logs and attributes" on page 17. Audit log messages Event auditing is designed to support post-event audits and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware downloads, and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 25
used for debugging or analyzing the problem. FFDC is intended for use by Brocade technical support. FFDC is enabled by default. Execute the supportFfdc command to wide ranging and are to be used as general guidelines for troubleshooting. For all cases, you must look at each specific error message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 26
that the software has detected serious problems that will cause a partial or message logging The RASLog service generates and stores messages are saved to nonvolatile storage by default. • The system error message using the supportSave command. • Brocade recommends that you configure the syslogd - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 27
UNIX, Linux, or any other operating system that supports the standard syslogd functionality. Configuring for syslogd involves configuring the host, enabling syslogd on the Brocade model, and, optionally, setting the facility level. For the Brocade DCX family of switches, each control processor (CP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 28
level, the repeat count, and description. The following are the possible severity levels: • None (0) • Critical (1) • Error (2) • Warning (3) • Informational (4) • Debug (5) By default, the severity level is set to None, implying all traps are filtered and therefore no event traps are received. When - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 29
because the trap recipient does not send any acknowledgment when it receives a trap. Therefore, the SNMP agent cannot determine if the trap was received. Brocade switches send traps out on UDP port 162. To receive traps, the management station IP address must be configured on the switch. You can - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 30
] SNMPv3 user configuration(snmp user not configured in FOS user database will have physical AD and admin role as the default): User (rw): [snmpadmin1] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] User (rw - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 31
all event notifications. Otherwise, use the SNMP traps. Brocade devices support SNMPv3 informs. Configuring the SNMPv3 inform recipient To configure to enable the SNMP informs, enter true or t. Informs are disabled by default. switch:admin> snmpconfig --set snmpv3 SNMP Informs Enabled (true, t, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 32
1 Configuring the syslog message destinations Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] Engine ID: [0:0:0:0:0:0:0:0:0] User (rw): [snmpadmin2] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] 1 New Auth Passwd: Verify Auth Passwd: Priv Protocol [DES(1)/ - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 33
from the system message log. Port logs are typically used to troubleshoot device connections. Changing the severity level of swEventTrap When an event the SNMP trap, swEventTrap, is sent to the configured trap recipients. By default, the severity level is set at 0 (None), implying that all the event - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 34
snmpConfig --set mibCapability command to configure MIBs interactively. All the supported MIBs and associated traps are displayed. You can change the 1 (Critical), 2 (Error), 3 (Warning), or 4 (Informational). The default value is 0. switch:admin> snmpconfig --set mibcapability FE-MIB: YES SW-MIB - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 35
Commands for displaying and configuring the system message logs 1 IF-MIB: YES BD-MIB: YES SW-TRAP: YES swFault: YES swSensorScn: YES swFCPortScn: YES swEventTrap: YES DesiredSeverity:Informational swFabricWatchTrap: YES DesiredSeverity:Critical swTrackChangesTrap: YES swIPv6ChangeTrap: YES - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 36
selected messages or modules, to change the default severity level for a specified message, and supportSave supportShow Sets, clears, or displays support FTP parameters or a time interval to output is used by your switch service provider to diagnose and correct problems with the switch. The output - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 37
. RECOMMENDED ACTION Top Talker cannot be installed on a fabric with FCR service enabled. In case Top Talker must be installed on a fabric, disable severity level command if you want to set the Audit severity level. By default, all messages are logged. When the severity is set, only messages with - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 38
1 Configuring system messages and attributes 5. Execute the auditCfg --show command to verify the configuration. switch:admin> auditcfg --show Audit filter is enabled. 1-ZONE 2-SECURITY 3-CONFIGURATION 4-FIRMWARE 5-FABRIC 6-FW 7-LS 8-CLI Severity level: ERROR You must configure the syslog daemon to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 39
that belong to a module. Setting the severity level of a RASLog message To change the default severity level of a RASLog message, perform the following steps. 1. Log in to the switch These procedures are valid for all the supported platforms. Fabric OS Message Reference 17 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 40
is created. 2000/12/17-05:55:04, [FCR-1069], 3, FID 128, INFO, switch, The FC Routing service is enabled. 2000/12/17-05:55:04, [FCR-1068], 4, FID 128, INFO, switch, The FC Routing service is disabled. 2000/12/17-05:55:11, [EM-1034], 5, CHASSIS, ERROR, switch, PS 2 set to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 41
Displaying system message logs and attributes 1 Displaying Audit messages To display the Audit messages, perform the following steps. Beginning with Fabric OS v7.1.0 release, the RAS-3005 message is generated for each CLI command executed on switch and is saved in the Audit message log. 1. Log in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 42
module_ID command to display the status of all messages that belong to the module. switch:admin> rasadmin --show -module ECC Message Status Default Severity Current Severity ECC-1000 ENABLED ERROR ERROR ECC-1001 DISABLED ERROR WARNING • Execute the rasadmin --show -disabled command to display - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 43
RASLog messages based on the severity level, perform the following steps. 1. Log in to the switch as admin. 2. Execute the errdump --severity [DEFAULT | INFO | WARNING | ERROR | CRITICAL] command. For more information on message severity levels, refer to "Message severity levels" on page 3. You can - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 44
19-03:26:44, [IPAD-1001], 33, SLOT 4 | CHASSIS, INFO, switch, CP/1 IPv6 manual fe80::224:38ff:fe1b:4400 DHCP Off. 2012/06/19-03:29:15, [IPAD-1000], 48, SLOT :3f49/64 tentative DHCP Off. [...] NOTE The slot option is not supported on the non-bladed systems. Viewing RASLog messages from Web Tools To - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 45
| FFDC | CHASSIS, INFO, ESNSVT_DCX, supportSave has uploaded support information to the host with IP address 192.0.2.2. 2011/02 the blade within the switch platform, for example, Brocade DCX contains FC8-48 blade, FC8-32 blade, cause and actions recommended in this manual. Note that not all message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 46
to 128. FID 128 means the message was generated by the default switch instance. • CHASSIS - The message that was generated by interest for post-event auditing and troubleshooting the problem. The following example shows the , Incorrect password during login attempt. 24 Fabric OS Message Reference - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 47
the message was generated on the switch. The RASLog subsystem will support an internationalized time stamp format based on the "LOCAL" setting. The message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all message numbers are used; there can be gaps - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 48
system messages. Looking up a system message Messages in this manual are arranged alphabetically by Module ID, and then numerically within cause • Recommended action Gathering information about the problem Questions to ask yourself when troubleshooting a system message are as follows: • What - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 49
command (as needed) to set up automatic FTP transfers, and then execute the supportSave command. Support Fabric OS creates a number of files that can help support personnel troubleshoot and diagnose a problem. This section describes those files and how to access or save the information for - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 50
modules for which messages are documented in this guide; the system modules are listed alphabetically by IP port configuration messages over the Brocade 7800 and FX8-24 blade. Blade on blade FOS (BFOS). The messages of CVLC are problems encountered by CVLC, warnings to alert the user, or information - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 51
CLI commands, system light emitting diodes (LEDs), and status and alarm messages. EM also manages some component-related data. Exchange Switch Support (ESS) error messages indicate problems with the ESS module of the Fabric OS. ESS is an SW_ILS mechanism utilized by switches to exchange vendor and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 52
service. A component is a module in the Fabric OS, implementing a related set of functionality. A service Health monitor. HSL error messages indicate problems with the Hardware Subsystem Layer of emd) • Event Manager daemon (evmd) • Exchange Switch Support daemon (essd) • FA-API rpc daemon (rpcd) 30 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 53
daemon (ssmd) • Time Service daemon (tsd) • TRACE daemon (traced) • Traffic daemon (trafd) • VS daemon (vsd) • Web linker daemon (weblinkerd) • Web Tools daemon (webd) • ZONE daemon (zoned) KTRC Kernel RAS trace module. L2SS L2SYS error messages indicate problems with the Layer 2 System - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 54
Sub-System messages indicate any problems associated with the Layer 2 and Layer 3 Multicast platform support, including allocation of global platform , each of variable length, to be queued. Any process or interrupt service routine (ISR) can write messages to a message queue. Any process can - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 55
the FFDC log and size or roll-over warning. The reliable commit service daemon generates log entries when it receives a request from the zoning, security station. Brocade switches support six management entities that can be configured to receive these traps. SPC messages indicate problems and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 56
(Continued) Description SSMD error messages indicate problems with the System Services Module of the Fabric OS. The software to the Fabric OS Command Reference or the Fabric OS Administrator's Guide. Time Service provides fabric time-synchronization by synchronizing all clocks in the fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 57
Log Messages AG Messages AG-1001 AG-1002 AG-1003 AG-1004 AG-1005 AG-1006 AG-1007 AG-1008 AG-1009 AG-1010 AG-1011 AG-1012 AG-1013 AG-1014 AG-1015 AG-1016 AG-1017 AG-1018 AG-1019 AG-1020 AG-1021 AG-1022 AG-1023 AG-1024 AG-1025 AG-1026 AG-1027 AG-1028 Fabric OS Message Reference 53-1002749-01 Chapter - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 58
2 AN Messages AG-1029 AG-1030 AG-1031 AG-1032 AG-1033 AG-1034 AG-1035 AG-1036 AG-1037 AG-1038 AG-1039 AG-1040 AG-1041 AG-1042 AG-1043 AG-1044 AN Messages AN-1001 AN-1002 AN-1003 AN-1004 AN-1005 AN-1010 AN-1011 AN-1012 AN-1013 ANV Messages ANV-1001 ANV-1002 ANV-1003 ANV-1004 ANV-1005 36 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 59
ANV-1006 ANV-1007 ANV-1008 ANV-1015 ANV-1016 ANV-1028 AUTH Messages AUTH-1001 AUTH-1002 AUTH-1003 AUTH-1004 AUTH-1005 AUTH-1006 AUTH-1007 AUTH-1008 AUTH-1010 AUTH-1011 AUTH-1012 AUTH-1013 AUTH-1014 AUTH-1016 AUTH-1017 AUTH-1018 AUTH-1020 AUTH-1022 AUTH-1023 AUTH-1025 AUTH-1026 AUTH-1027 AUTH-1028 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 60
2 BKSW Messages AUTH-1033 AUTH-1034 AUTH-1035 AUTH-1036 AUTH-1037 AUTH-1038 AUTH-1039 AUTH-1040 AUTH-1041 AUTH-1042 AUTH-1043 AUTH-1044 AUTH-1045 AUTH-1046 AUTH-1047 BKSW Messages BKSW-1003 BL Messages BL-1000 BL-1001 BL-1002 BL-1003 BL-1004 BL-1006 BL-1007 BL-1008 BL-1009 BL-1010 BL-1011 BL-1012 BL - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 61
BL-1015 BL-1016 BL-1017 BL-1018 BL-1019 BL-1020 BL-1021 BL-1022 BL-1023 BL-1024 BL-1025 BL-1026 BL-1027 BL-1028 BL-1029 BL-1030 BL-1031 BL-1032 BL-1033 BL-1034 BL-1035 BL-1036 BL-1037 BL-1038 BL-1039 BL-1041 BL-1045 BL-1046 BL-1047 BL-1048 BL-1049 BL-1050 BL-1051 BL-1052 Fabric OS Message Reference - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 62
2 BLS Messages BLS Messages BLS-1000 BLS-1001 BLS-1002 BLS-1003 BLS-1004 BLS-1005 BM Messages BM-1001 BM-1002 BM-1003 BM-1004 BM-1005 BM-1006 BM-1007 BM-1008 BM-1009 BM-1010 BM-1053 BM-1054 BM-1055 BM-1056 BM-1058 C2 Messages C2-1001 C2-1002 C2-1004 C2-1006 C2-1007 C2-1008 C2-1009 C2-1010 40 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 63
C2-1012 C2-1013 C2-1014 C2-1015 C2-1016 C2-1017 C2-1018 C2-1019 C2-1025 C2-1026 C2-1027 C2-1028 C3 Messages C3-1001 C3-1002 C3-1004 C3-1006 C3-1007 C3-1008 C3-1009 C3-1010 C3-1011 C3-1012 C3-1013 C3-1014 C3-1015 C3-1016 C3-1017 C3-1018 C3-1019 C3-1020 C3-1021 C3-1023 C3-1025 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 64
2 CAL Messages C3-1026 C3-1027 C3-1028 CAL Messages CAL-1001 CCFG Messages CCFG-1001 CCFG-1002 CCFG-1003 CCFG-1004 CCFG-1005 CCFG-1006 CCFG-1007 CCFG-1008 CCFG-1009 CCFG-1010 CCFG-1011 CCFG-1012 CDR Messages CDR-1001 CDR-1002 CDR-1003 CDR-1004 CDR-1005 CDR-1006 CDR-1007 CDR-1008 CDR-1009 CDR-1010 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 65
CDR-1014 CDR-1015 CDR-1016 CDR-1017 CDR-1018 CDR-1019 CDR-1022 CDR-1028 CHS Messages CHS-1002 CHS-1003 CHS-1004 CHS-1005 CNM Messages CNM-1001 CNM-1002 CNM-1003 CNM-1004 CNM-1005 CNM-1006 CNM-1007 CNM-1008 CNM-1009 CNM-1010 CNM-1011 CNM-1012 CNM-1013 CNM-1014 CNM-1015 CNM-1016 CNM-1017 CNM-1018 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 66
2 CNM Messages CNM-1019 CNM-1020 CNM-1021 CNM-1022 CNM-1023 CNM-1024 CNM-1025 CNM-1026 CNM-1027 CNM-1028 CNM-1029 CNM-1030 CNM-1031 CNM-1032 CNM-1033 CNM-1034 CNM-1035 CNM-1036 CNM-1037 CNM-1038 CNM-1039 CNM-1040 CNM-1041 CNM-1042 CNM-1043 CNM-1044 CNM-1045 CNM-1046 CNM-1047 CNM-1048 CNM-1049 CNM- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 67
CNM-1054 CNM-1055 CNM-1056 CNM-1057 CNM-1058 CNM-1059 CNM-1060 CNM-1061 CNM-1062 CNM-3001 CNM-3002 CNM-3003 CNM-3004 CNM-3005 CNM-3006 CNM-3007 CNM-3008 CNM-3009 CNM-3010 CNM-3011 CNM-3012 CONF Messages CONF-1000 CONF-1001 CONF-1021 CONF-1023 CONF-1024 CONF-1030 CONF-1031 CONF-1032 CONF-1040 CONF- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 68
2 CTAP Messages CONF-1044 CTAP Messages CTAP-1001 CVLC Messages CVLC-1001 CVLC-1002 CVLC-1003 CVLC-1004 CVLC-1005 CVLC-1006 CVLC-1007 CVLC-1008 CVLC-1009 CVLC-1010 CVLC-1011 CVLC-1012 CVLC-1013 CVLC-1014 CVLC-1015 CVLC-1016 CVLC-1017 CVLC-1018 CVLC-1019 CVLC-1020 CVLC-1021 CVLC-1022 CVLC-1023 CVLC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 69
CVLC-1029 CVLC-1030 CVLC-1031 CVLC-1032 CVLC-1033 CVLC-1034 CVLC-1035 CVLC-1039 CVLC-1041 CVLM Messages CVLM-1001 CVLM-1002 CVLM-1003 CVLM-1004 CVLM-1005 CVLM-1006 CVLM-1007 CVLM-1008 CVLM-1009 CVLM-1010 CVLM-1011 CVLM-1012 CVLM-1013 CVLM-1014 CVLM-1015 CVLM-1016 CVLM-3001 CVLM-3002 CVLM-3003 CVLM- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 70
2 DOT1 Messages CVLM-3009 CVLM-3010 CVLM-3011 CVLM-3012 CVLM-3013 CVLM-3014 CVLM-3015 CVLM-3016 CVLM-3017 CVLM-3018 CVLM-3019 CVLM-3020 CVLM-3021 CVLM-3022 CVLM-3023 CVLM-3024 CVLM-3025 CVLM-3026 CVLM-3027 CVLM-3028 DOT1 Messages DOT1-1001 DOT1-1002 DOT1-1003 DOT1-1004 DOT1-1005 DOT1-1006 DOT1-1007 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 71
ECC Messages ECC-1000 ECC-1001 EM Messages EM-1001 EM-1002 EM-1003 EM-1004 EM-1005 EM-1006 EM-1008 EM-1009 EM-1010 EM-1011 EM-1012 EM-1013 EM-1014 EM-1015 EM-1016 EM-1017 EM-1018 EM-1019 EM-1020 EM-1028 EM-1029 EM-1031 EM-1033 EM-1034 EM-1035 EM-1036 EM-1037 EM-1042 EM-1043 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 72
2 ESS Messages EM-1044 EM-1045 EM-1046 EM-1047 EM-1048 EM-1049 EM-1050 EM-1051 EM-1057 EM-1058 EM-1059 EM-1060 EM-1061 EM-1062 EM-1063 EM-1064 EM-1065 EM-1066 EM-1067 EM-1068 EM-1069 EM-1070 EM-1071 EM-1072 EM-2003 ESS Messages ESS-1001 ESS-1002 ESS-1003 ESS-1004 ESS-1005 ESS-1008 ESS-1009 ESS-1010 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 73
ESW Messages ESW-1001 ESW-1002 ESW-1003 ESW-1004 ESW-1005 ESW-1006 ESW-1007 ESW-1008 EVMD Messages EVMD-1001 FABR Messages FABR-1001 FABR-1002 FABR-1003 FABR-1004 FABR-1005 FABR-1006 FABR-1007 FABR-1008 FABR-1009 FABR-1010 FABR-1011 FABR-1012 FABR-1013 FABR-1014 FABR-1015 FABR-1016 FABR-1017 FABR- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 74
2 FABS Messages FABR-1021 FABR-1022 FABR-1023 FABR-1024 FABR-1029 FABR-1030 FABR-1031 FABR-1032 FABR-1034 FABR-1035 FABR-1036 FABR-1037 FABR-1038 FABR-1039 FABR-1040 FABR-1041 FABR-1043 FABR-1044 FABR-1045 FABR-1046 FABR-1047 FABR-1048 FABR-1049 FABR-1050 FABR-1051 FABR-1052 FABR-1053 FABR-1054 FABR - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 75
FABS-1006 FABS-1007 FABS-1008 FABS-1009 FABS-1010 FABS-1011 FABS-1013 FABS-1014 FABS-1015 FBC Messages FBC-1001 FCMC Messages FCMC-1001 FCOE Messages FCOE-1001 FCOE-1002 FCOE-1003 FCOE-1004 FCOE-1005 FCOE-1006 FCOE-1007 FCOE-1009 FCOE-1010 FCOE-1012 FCOE-1014 FCOE-1015 FCOE-1016 FCOE-1017 FCOE-1019 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 76
2 FCPD Messages FCOE-1023 FCOE-1024 FCOE-1025 FCOE-1026 FCOE-1027 FCOE-1028 FCOE-1029 FCOE-1030 FCOE-1031 FCOE-1032 FCOE-1033 FCOE-1034 FCOE-1037 FCOE-1038 FCOE-1039 FCOE-1040 FCOE-1041 FCOE-1042 FCOE-1043 FCOE-1044 FCOE-1045 FCOE-1046 FCOE-1047 FCOE-1048 FCPD Messages FCPD-1001 FCPD-1002 FCPD-1003 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 77
FCPH-1004 FCPH-1005 FCR Messages FCR-1001 FCR-1002 FCR-1003 FCR-1004 FCR-1005 FCR-1006 FCR-1007 FCR-1008 FCR-1009 FCR-1010 FCR-1011 FCR-1012 FCR-1013 FCR-1015 FCR-1016 FCR-1018 FCR-1019 FCR-1020 FCR-1021 FCR-1022 FCR-1023 FCR-1024 FCR-1025 FCR-1026 FCR-1027 FCR-1028 FCR-1029 FCR-1030 FCR-1031 FCR- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 78
2 FCR Messages FCR-1034 FCR-1035 FCR-1036 FCR-1037 FCR-1038 FCR-1039 FCR-1040 FCR-1041 FCR-1042 FCR-1043 FCR-1048 FCR-1049 FCR-1053 FCR-1054 FCR-1055 FCR-1056 FCR-1057 FCR-1058 FCR-1059 FCR-1060 FCR-1061 FCR-1062 FCR-1063 FCR-1064 FCR-1065 FCR-1066 FCR-1067 FCR-1068 FCR-1069 FCR-1070 FCR-1071 FCR- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 79
FCR-1076 FCR-1077 FCR-1078 FCR-1079 FCR-1080 FCR-1081 FCR-1082 FCR-1083 FCR-1084 FCR-1085 FCR-1086 FCR-1087 FCR-1088 FCR-1089 FCR-1091 FCR-1092 FCR-1093 FCR-1094 FCR-1095 FCR-1096 FCR-1097 FCR-1098 FICN Messages FICN-1003 FICN-1004 FICN-1005 FICN-1006 FICN-1007 FICN-1008 FICN-1009 FICN-1010 FICN- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 80
2 FICN Messages FICN-1014 FICN-1015 FICN-1016 FICN-1017 FICN-1018 FICN-1019 FICN-1020 FICN-1021 FICN-1022 FICN-1023 FICN-1024 FICN-1025 FICN-1026 FICN-1027 FICN-1028 FICN-1029 FICN-1030 FICN-1031 FICN-1032 FICN-1033 FICN-1034 FICN-1035 FICN-1036 FICN-1037 FICN-1038 FICN-1039 FICN-1040 FICN-1041 FICN - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 81
FICN-1049 FICN-1050 FICN-1051 FICN-1052 FICN-1053 FICN-1054 FICN-1055 FICN-1056 FICN-1057 FICN-1058 FICN-1059 FICN-1060 FICN-1061 FICN-1062 FICN-1063 FICN-1064 FICN-1065 FICN-1066 FICN-1067 FICN-1068 FICN-1069 FICN-1070 FICN-1071 FICN-1072 FICN-1073 FICN-1074 FICN-1075 FICN-1076 FICN-1077 FICN-1078 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 82
2 FICN Messages FICN-1084 FICN-1085 FICN-1086 FICN-1087 FICN-1088 FICN-1089 FICN-1090 FICN-1091 FICN-1092 FICN-1093 FICN-1094 FICN-1095 FICN-1096 FICN-1097 FICN-1098 FICN-1099 FICN-1100 FICN-1101 FICN-1102 FICN-1103 FICN-1104 FICN-1105 FICN-1106 FICN-1107 FICN-1108 FICN-1109 FICN-1110 FICN-1111 FICN - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 83
FICN-1119 FICN-1120 FICN-1121 FICN-1122 FICN-2005 FICN-2006 FICN-2064 FICN-2065 FICN-2066 FICN-2082 FICN-2083 FICN-2085 FICN-2086 FICN-2087 FICU Messages FICU-1001 FICU-1002 FICU-1003 FICU-1004 FICU-1005 FICU-1006 FICU-1007 FICU-1008 FICU-1009 FICU-1010 FICU-1011 FICU-1012 FICU-1013 FICU-1017 FICU- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 84
2 FKLB Messages FICU-1023 FICU-1024 FKLB Messages FKLB-1001 FLOD Messages FLOD-1001 FLOD-1003 FLOD-1004 FLOD-1005 FLOD-1006 FSPF Messages FSPF-1001 FSPF-1002 FSPF-1003 FSPF-1005 FSPF-1006 FSPF-1007 FSPF-1008 FSPF-1009 FSPF-1010 FSPF-1011 FSPF-1012 FSS Messages FSS-1001 FSS-1002 FSS-1003 FSS-1004 FSS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 85
FSS-1008 FSS-1009 FSS-1010 FSS-1011 FSSM Messages FSSM-1002 FSSM-1003 FSSM-1004 FW Messages FW-1001 FW-1002 FW-1003 FW-1004 FW-1005 FW-1006 FW-1007 FW-1008 FW-1009 FW-1010 FW-1011 FW-1012 FW-1033 FW-1034 FW-1035 FW-1036 FW-1037 FW-1038 FW-1039 FW-1040 FW-1041 FW-1042 FW-1043 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 86
2 FW Messages FW-1044 FW-1045 FW-1046 FW-1047 FW-1048 FW-1049 FW-1050 FW-1051 FW-1052 FW-1053 FW-1054 FW-1113 FW-1114 FW-1115 FW-1116 FW-1117 FW-1118 FW-1119 FW-1120 FW-1121 FW-1122 FW-1123 FW-1124 FW-1125 FW-1126 FW-1127 FW-1128 FW-1129 FW-1130 FW-1131 FW-1132 FW-1133 FW-1134 FW-1135 FW-1136 64 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 87
FW-1137 FW-1138 FW-1139 FW-1140 FW-1160 FW-1161 FW-1162 FW-1163 FW-1164 FW-1165 FW-1166 FW-1167 FW-1168 FW-1169 FW-1170 FW-1171 FW-1172 FW-1173 FW-1174 FW-1175 FW-1176 FW-1177 FW-1178 FW-1179 FW-1180 FW-1181 FW-1182 FW-1183 FW-1184 FW-1185 FW-1186 FW-1187 FW-1188 FW-1189 FW-1190 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 88
2 FW Messages FW-1191 FW-1192 FW-1193 FW-1194 FW-1195 FW-1196 FW-1197 FW-1198 FW-1199 FW-1200 FW-1201 FW-1202 FW-1203 FW-1204 FW-1205 FW-1206 FW-1207 FW-1216 FW-1217 FW-1218 FW-1219 FW-1240 FW-1241 FW-1242 FW-1243 FW-1244 FW-1245 FW-1246 FW-1247 FW-1248 FW-1249 FW-1250 FW-1251 FW-1272 FW-1273 66 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 89
FW-1274 FW-1275 FW-1296 FW-1297 FW-1298 FW-1299 FW-1300 FW-1301 FW-1302 FW-1303 FW-1304 FW-1305 FW-1306 FW-1307 FW-1308 FW-1309 FW-1310 FW-1311 FW-1312 FW-1313 FW-1314 FW-1315 FW-1316 FW-1317 FW-1318 FW-1319 FW-1320 FW-1321 FW-1322 FW-1323 FW-1324 FW-1325 FW-1326 FW-1327 FW-1328 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 90
2 FW Messages FW-1329 FW-1330 FW-1331 FW-1332 FW-1333 FW-1334 FW-1335 FW-1336 FW-1337 FW-1338 FW-1339 FW-1340 FW-1341 FW-1342 FW-1343 FW-1344 FW-1345 FW-1346 FW-1347 FW-1348 FW-1349 FW-1350 FW-1351 FW-1352 FW-1353 FW-1354 FW-1355 FW-1356 FW-1357 FW-1358 FW-1359 FW-1360 FW-1361 FW-1362 FW-1363 68 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 91
FW-1364 FW-1365 FW-1366 FW-1367 FW-1368 FW-1369 FW-1370 FW-1371 FW-1372 FW-1373 FW-1374 FW-1375 FW-1376 FW-1377 FW-1378 FW-1379 FW-1400 FW-1401 FW-1402 FW-1403 FW-1404 FW-1405 FW-1406 FW-1407 FW-1408 FW-1424 FW-1425 FW-1426 FW-1427 FW-1428 FW-1429 FW-1430 FW-1431 FW-1432 FW-1433 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 92
2 FW Messages FW-1434 FW-1435 FW-1436 FW-1437 FW-1438 FW-1439 FW-1440 FW-1441 FW-1442 FW-1443 FW-1444 FW-1445 FW-1446 FW-1447 FW-1448 FW-1500 FW-1501 FW-1502 FW-1510 FW-1511 FW-1512 FW-1513 FW-1514 FW-1515 FW-1516 FW-1517 FW-1518 FW-1519 FW-1520 FW-1521 FW-1522 FW-1523 FW-1524 FW-1525 FW-1526 70 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 93
FW-1527 FW-1528 FW-1529 FW-1530 FW-1531 FW-1532 FW-1533 FW-1534 FW-1535 FW-2000 FW-3010 FW-3011 FW-3012 FW-3013 FW-3014 FW-3015 FW-3016 FW-3017 FW-3018 FW-3019 FW-3020 FW-3021 FW-3022 HAM Messages HAM-1001 HAM-1002 HAM-1004 HAM-1005 HAM-1006 HAM-1007 HAM-1008 HAM-1009 HAM-1010 HAM-1011 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 94
2 HAMK Messages HAM-1013 HAM-1014 HAMK Messages HAMK-1001 HAMK-1002 HAMK-1003 HAMK-1004 HIL Messages HIL-1101 HIL-1102 HIL-1103 HIL-1104 HIL-1105 HIL-1106 HIL-1107 HIL-1108 HIL-1201 HIL-1202 HIL-1203 HIL-1204 HIL-1206 HIL-1207 HIL-1208 HIL-1301 HIL-1302 HIL-1303 HIL-1304 HIL-1305 HIL-1306 HIL-1307 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 95
HIL-1310 HIL-1311 HIL-1401 HIL-1402 HIL-1403 HIL-1404 HIL-1501 HIL-1502 HIL-1503 HIL-1504 HIL-1505 HIL-1506 HIL-1507 HIL-1508 HIL-1509 HIL-1510 HIL-1511 HIL-1601 HIL-1602 HIL-1603 HIL-1605 HIL-1610 HIL-1611 HIL-1612 HIL-1613 HIL-1650 HLO Messages HLO-1001 HLO-1002 HLO-1003 HMON Messages HMON-1001 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 96
2 HSL Messages HSL Messages HSL-1000 HSL-1001 HSL-1002 HSL-1003 HSL-1004 HSL-1005 HSL-1006 HSL-1007 HTTP Messages HTTP-1001 HTTP-1002 HTTP-1003 IBD Messages IBD-1000 IPAD Messages IPAD-1000 IPAD-1001 IPAD-1002 IPAD-1003 IPAD-1004 IPS Messages IPS-1001 IPS-1002 IPS-1003 IPS-1004 IPS-1005 IPS-1006 IPS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 97
ISNS Messages ISNS-1001 ISNS-1002 ISNS-1003 ISNS-1004 ISNS-1005 ISNS-1006 ISNS-1008 ISNS-1009 ISNS-1010 ISNS-1011 ISNS-1013 ISNS-1014 KAC Messages KAC-1002 KAC-1004 KAC-1006 KAC-1007 KAC-1008 KAC-1009 KAC-1010 KAC-1011 KAC-1012 KAC-1013 KAC-1014 KAC-1015 KAC-1016 KAC-1017 KSWD Messages KSWD-1001 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 98
2 KTRC Messages KTRC Messages KTRC-1001 KTRC-1002 KTRC-1003 KTRC-1004 KTRC-1005 L2SS Messages L2SS-1001 L2SS-1002 L2SS-1003 L2SS-1004 L2SS-1005 L2SS-1006 L2SS-1007 L2SS-1008 L3SS Messages L3SS-1004 LACP Messages LACP-1001 LACP-1002 LANCE Messages LANCE-1000 LFM Messages LFM-1001 LFM-1002 LFM-1003 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 99
LFM-1006 LOG Messages LOG-1000 LOG-1001 LOG-1002 LOG-1003 LOG-1004 LOG-1005 LOG-1006 LOG-1007 LOG-1008 LOG-1009 LOG-1010 LOG-1011 LSDB Messages LSDB-1001 LSDB-1002 LSDB-1003 LSDB-1004 MCAST_SS Messages MCAST_SS-1001 MCAST_SS-1002 MCAST_SS-1003 MCAST_SS-1004 MCAST_SS-1005 MCAST_SS-1006 MCAST_SS-1007 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 100
2 MFIC Messages MCAST_SS-1012 MCAST_SS-1013 MCAST_SS-1014 MCAST_SS-1015 MCAST_SS-1016 MCAST_SS-1017 MCAST_SS-1018 MCAST_SS-1019 MCAST_SS-1020 MFIC Messages MFIC-1001 MFIC-1002 MFIC-1003 MM Messages MM-1001 MPTH Messages MPTH-1001 MPTH-1002 MPTH-1003 MQ Messages MQ-1004 MQ-1005 MQ-1006 MS Messages MS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 101
MS-1006 MS-1008 MS-1009 MS-1021 MS-1022 MS-1023 MS-1024 MS-1025 MS-1026 MS-1027 MS-1028 MS-1029 MS-1030 MSTP Messages MSTP-1001 MSTP-1002 MSTP-1003 MSTP-2001 MSTP-2002 MSTP-2003 MSTP-2004 MSTP-2005 MSTP-2006 NBFS Messages NBFS-1001 NBFS-1002 NBFS-1003 NBFS-1004 NS Messages NS-1001 NS-1002 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 102
2 NSM Messages NS-1003 NS-1004 NS-1005 NS-1006 NS-1007 NS-1008 NS-1009 NS-1010 NS-1011 NS-1012 NSM Messages NSM-1001 NSM-1002 NSM-1003 NSM-1004 NSM-1005 NSM-1006 NSM-1007 NSM-1008 NSM-1009 NSM-1010 NSM-1011 NSM-1012 NSM-1013 NSM-1014 NSM-1015 NSM-1016 NSM-1017 NSM-1018 NSM-1019 NSM-1020 80 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 103
ONMD Messages ONMD-1000 ONMD-1001 ONMD-1002 ONMD-1003 ONMD-1004 ONMD-1005 PDM Messages PDM-1001 PDM-1002 PDM-1003 PDM-1004 PDM-1005 PDM-1006 PDM-1007 PDM-1008 PDM-1009 PDM-1010 PDM-1011 PDM-1012 PDM-1013 PDM-1014 PDM-1017 PDM-1019 PDM-1020 PDM-1021 PDM-1022 PDM-1023 PDM-1024 PDM-1025 PDM-1026 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 104
2 PDTR Messages PDTR Messages PDTR-1001 PDTR-1002 PLAT Messages PLAT-1000 PLAT-1001 PLAT-1002 PLAT-1003 PLAT-1004 PLAT-1072 PMGR Messages PMGR-1001 PMGR-1002 PMGR-1003 PMGR-1004 PMGR-1005 PMGR-1006 PMGR-1007 PMGR-1008 PMGR-1009 PMGR-1010 PMGR-1011 PORT Messages PORT-1003 PORT-1004 PORT-1005 PORT- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 105
PS Messages PS-1000 PS-1001 PS-1002 PS-1003 PS-1004 PS-1005 PS-1006 PS-1007 PS-1008 PS-1009 PS-1010 PSWP Messages PSWP-1001 PSWP-1002 PSWP-1003 PSWP-1004 PSWP-1005 PSWP-1006 PSWP-1007 RAS Messages RAS-1001 RAS-1002 RAS-1004 RAS-1005 RAS-1006 RAS-1007 RAS-2001 RAS-2002 RAS-2003 RAS-3001 RAS-3002 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 106
2 RCS Messages RAS-3003 RAS-3004 RCS Messages RCS-1001 RCS-1002 RCS-1003 RCS-1004 RCS-1005 RCS-1006 RCS-1007 RCS-1008 RCS-1009 RCS-1010 RCS-1011 RCS-1012 RCS-1013 RKD Messages RKD-1001 RKD-1002 RKD-1003 RKD-1004 RKD-1005 RMON Messages RMON-1001 RMON-1002 RPCD Messages RPCD-1001 RPCD-1002 RPCD-1003 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 107
RPCD-1005 RPCD-1006 RPCD-1007 RTE Messages RTE-1001 RTWR Messages RTWR-1001 RTWR-1002 RTWR-1003 SCN Messages SCN-1001 SCN-1002 SEC Messages SEC-1001 SEC-1002 SEC-1003 SEC-1005 SEC-1006 SEC-1007 SEC-1008 SEC-1009 SEC-1010 SEC-1016 SEC-1022 SEC-1024 SEC-1025 SEC-1026 SEC-1028 SEC-1029 SEC-1030 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 108
2 SEC Messages SEC-1031 SEC-1032 SEC-1033 SEC-1034 SEC-1035 SEC-1036 SEC-1037 SEC-1038 SEC-1039 SEC-1040 SEC-1041 SEC-1042 SEC-1043 SEC-1044 SEC-1045 SEC-1046 SEC-1049 SEC-1050 SEC-1051 SEC-1052 SEC-1053 SEC-1054 SEC-1055 SEC-1056 SEC-1057 SEC-1059 SEC-1062 SEC-1063 SEC-1064 SEC-1065 SEC-1069 SEC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 109
SEC-1075 SEC-1076 SEC-1077 SEC-1078 SEC-1079 SEC-1080 SEC-1081 SEC-1082 SEC-1083 SEC-1084 SEC-1085 SEC-1086 SEC-1087 SEC-1088 SEC-1089 SEC-1090 SEC-1091 SEC-1092 SEC-1093 SEC-1094 SEC-1095 SEC-1096 SEC-1097 SEC-1098 SEC-1099 SEC-1100 SEC-1101 SEC-1102 SEC-1104 SEC-1105 SEC-1106 SEC-1107 SEC-1108 SEC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 110
2 SEC Messages SEC-1112 SEC-1113 SEC-1114 SEC-1115 SEC-1116 SEC-1117 SEC-1118 SEC-1119 SEC-1121 SEC-1122 SEC-1123 SEC-1124 SEC-1126 SEC-1130 SEC-1135 SEC-1136 SEC-1137 SEC-1138 SEC-1139 SEC-1142 SEC-1145 SEC-1146 SEC-1153 SEC-1154 SEC-1155 SEC-1156 SEC-1157 SEC-1158 SEC-1159 SEC-1160 SEC-1163 SEC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 111
SEC-1168 SEC-1170 SEC-1171 SEC-1172 SEC-1173 SEC-1174 SEC-1175 SEC-1176 SEC-1180 SEC-1181 SEC-1182 SEC-1183 SEC-1184 SEC-1185 SEC-1186 SEC-1187 SEC-1188 SEC-1189 SEC-1190 SEC-1191 SEC-1192 SEC-1193 SEC-1194 SEC-1195 SEC-1196 SEC-1197 SEC-1198 SEC-1199 SEC-1200 SEC-1201 SEC-1202 SEC-1203 SEC-1250 SEC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 112
2 SEC Messages SEC-1300 SEC-1301 SEC-1302 SEC-1303 SEC-1304 SEC-1305 SEC-1306 SEC-1307 SEC-1308 SEC-1309 SEC-1310 SEC-1311 SEC-1312 SEC-1313 SEC-1314 SEC-1315 SEC-1316 SEC-1317 SEC-1318 SEC-1319 SEC-1320 SEC-1321 SEC-1322 SEC-1323 SEC-1324 SEC-1325 SEC-1326 SEC-1327 SEC-1328 SEC-1329 SEC-1330 SEC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 113
SEC-1335 SEC-1336 SEC-1337 SEC-1338 SEC-1339 SEC-3035 SEC-3036 SEC-3037 SEC-3038 SEC-3039 SEC-3050 SEC-3051 SEC-3061 SEC-3062 SEC-3063 SEC-3064 SEC-3065 SEC-3066 SEC-3067 SEC-4001 SFLO Messages SFLO-1001 SFLO-1002 SFLO-1003 SFLO-1004 SFLO-1005 SFLO-1006 SFLO-1007 SFLO-1008 SNMP Messages SNMP-1001 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 114
2 SPC Messages SNMP-1003 SNMP-1004 SNMP-1005 SNMP-1006 SNMP-1009 SPC Messages SPC-1001 SPC-1002 SPC-1003 SPC-2001 SPC-2002 SPC-2003 SPC-2004 SPC-2005 SPC-2006 SPC-2007 SPC-2008 SPC-2009 SPC-2010 SPC-2011 SPC-2012 SPC-2013 SPC-2014 SPC-2040 SPC-2041 SPC-2042 SPC-2043 SPC-2044 SPC-3001 SPC-3002 SPC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 115
SPC-3007 SPC-3008 SPC-3009 SPC-3010 SPC-3011 SPC-3012 SPC-3013 SPC-3014 SPC-3015 SPM Messages SPM-1001 SPM-1002 SPM-1003 SPM-1004 SPM-1005 SPM-1006 SPM-1007 SPM-1008 SPM-1009 SPM-1010 SPM-1011 SPM-1012 SPM-1013 SPM-1014 SPM-1015 SPM-1016 SPM-3001 SPM-3002 SPM-3003 SPM-3004 SPM-3005 SPM-3006 SPM-3007 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 116
2 SS Messages SPM-3009 SPM-3010 SPM-3011 SPM-3012 SPM-3013 SPM-3014 SPM-3015 SPM-3016 SPM-3017 SPM-3018 SPM-3019 SPM-3020 SPM-3021 SPM-3022 SPM-3023 SPM-3024 SPM-3025 SPM-3026 SPM-3027 SPM-3028 SPM-3029 SS Messages SS-1000 SS-1001 SS-1002 SS-1003 SS-1004 SS-1005 SS-1006 SS-1007 SS-1008 SS-1009 SS- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 117
SS-1012 SSMD Messages SSMD-1001 SSMD-1002 SSMD-1003 SSMD-1004 SSMD-1005 SSMD-1006 SSMD-1007 SSMD-1008 SSMD-1200 SSMD-1201 SSMD-1202 SSMD-1203 SSMD-1204 SSMD-1205 SSMD-1206 SSMD-1207 SSMD-1208 SSMD-1209 SSMD-1210 SSMD-1211 SSMD-1212 SSMD-1213 SSMD-1214 SSMD-1215 SSMD-1216 SSMD-1217 SSMD-1300 SSMD- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 118
2 SULB Messages SSMD-1306 SSMD-1307 SSMD-1308 SSMD-1309 SSMD-1310 SSMD-1311 SSMD-1312 SSMD-1313 SSMD-1314 SSMD-1315 SSMD-1316 SSMD-1317 SSMD-1318 SULB Messages SULB-1001 SULB-1002 SULB-1003 SULB-1004 SULB-1005 SULB-1006 SULB-1007 SULB-1008 SULB-1009 SULB-1010 SULB-1011 SULB-1017 SULB-1018 SULB-1020 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 119
SULB-1030 SULB-1031 SULB-1032 SULB-1033 SULB-1034 SULB-1035 SULB-1036 SULB-1037 SULB-1038 SULB-1039 SULB-1040 SULB-1041 SULB-1042 SULB-1043 SULB-1044 SWCH Messages SWCH-1001 SWCH-1002 SWCH-1003 SWCH-1004 SWCH-1005 SWCH-1006 SWCH-1007 SWCH-1008 SWCH-1009 SWCH-1010 SWCH-1011 SWCH-1012 SWCH-1013 SWCH- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 120
2 SYSC Messages SWCH-1019 SWCH-1020 SWCH-1021 SWCH-1022 SWCH-1023 SWCH-1024 SWCH-1025 SWCH-1026 SYSC Messages SYSC-1001 SYSC-1002 SYSC-1004 SYSC-1005 SYSM Messages SYSM-1001 SYSM-1002 SYSM-1003 SYSM-1004 SYSM-1005 SYSM-1006 SYSM-1007 TAPE Messages TAPE-1001 TRCE Messages TRCE-1001 TRCE-1002 TRCE- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 121
TRCE-1007 TRCE-1008 TRCE-1009 TRCE-1010 TRCE-1011 TRCE-1012 TRCE-1013 TRCK Messages TRCK-1001 TRCK-1002 TRCK-1003 TRCK-1004 TRCK-1005 TRCK-1006 TS Messages TS-1001 TS-1002 TS-1006 TS-1007 TS-1008 UCST Messages UCST-1003 UCST-1007 UCST-1020 UCST-1021 UCST-1022 UCST-1023 UCST-1024 UCST-1026 UCST-1027 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 122
2 UPTH Messages UPTH Messages UPTH-1001 UPTH-1002 VDR Messages VDR-2001 VS Messages VS-1001 VS-1002 VS-1003 VS-1004 VS-1005 VS-1006 VS-1007 VS-1008 WEBD Messages WEBD-1001 WEBD-1002 WEBD-1004 WEBD-1005 WEBD-1006 WEBD-1007 WEBD-1008 XTUN Messages XTUN-1000 XTUN-1001 XTUN-1002 XTUN-1003 XTUN-1004 XTUN - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 123
XTUN-1006 XTUN-1007 XTUN-1996 XTUN-1997 XTUN-1998 XTUN-1999 XTUN-2000 XTUN-2001 XTUN-2002 XTUN-2003 XTUN-2004 XTUN-2005 XTUN-2006 XTUN-2007 XTUN-2008 XTUN-2009 XTUN-2010 XTUN-2011 XTUN-2020 XTUN-2021 XTUN-2022 XTUN-2023 XTUN-2024 XTUN-2025 ZEUS Messages ZEUS-1001 ZEUS-1002 ZEUS-1003 ZEUS-1004 ZEUS- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 124
2 ZONE Messages ZONE Messages ZONE-1002 ZONE-1003 ZONE-1004 ZONE-1007 ZONE-1010 ZONE-1013 ZONE-1015 ZONE-1017 ZONE-1019 ZONE-1022 ZONE-1023 ZONE-1024 ZONE-1026 ZONE-1027 ZONE-1028 ZONE-1029 ZONE-1034 ZONE-1036 ZONE-1037 ZONE-1038 ZONE-1039 ZONE-1040 ZONE-1041 ZONE-1042 ZONE-1043 ZONE-1044 ZONE-1045 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 125
ZONE-1059 ZONE-1060 ZONE-1061 ZONE-1062 ZONE Messages 2 Fabric OS Message Reference 103 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 126
2 ZONE Messages 104 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 127
Audit Messages AG Messages AG-1033 AG-1034 AG-1035 AG-1036 AG-1037 AN Messages AN-1003 AN-1004 AN-1005 AN-1006 AN-1010 AN-1011 AN-1012 AN-1013 AUTH Messages AUTH-1045 AUTH-1046 AUTH-1047 AUTH-3001 AUTH-3002 AUTH-3003 AUTH-3004 AUTH-3005 AUTH-3006 AUTH-3007 AUTH-3008 Fabric OS Message Reference 53- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 128
3 BLS Messages BLS Messages BLS-1002 BLS-1003 CCFG Messages CCFG-1002 CCFG-1003 CCFG-1013 CNM Messages CNM-3001 CNM-3002 CNM-3003 CNM-3004 CNM-3005 CNM-3006 CNM-3007 CNM-3008 CNM-3009 CNM-3010 CNM-3011 CNM-3012 CONF Messages CONF-1000 CONF-1020 CONF-1022 CONF-1042 CONF-1043 CONF-1044 CVLM Messages - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 129
CVLM-3002 CVLM-3003 CVLM-3004 CVLM-3005 CVLM-3006 CVLM-3007 CVLM-3008 CVLM-3009 CVLM-3010 CVLM-3011 CVLM-3012 CVLM-3013 CVLM-3014 CVLM-3015 CVLM-3016 CVLM-3017 CVLM-3018 CVLM-3019 CVLM-3020 CVLM-3021 CVLM-3022 CVLM-3023 CVLM-3024 CVLM-3025 CVLM-3026 CVLM-3027 CVLM-3028 ESS Messages ESS-1008 ESS-1009 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 130
3 FICU Messages FICU Messages FICU-1011 FICU-1012 FICU-1019 FICU-1020 FICU-1021 FW Messages FW-1202 FW-1274 FW-1402 FW-1404 FW-1405 FW-1406 FW-3001 HAM Messages HAM-1015 HTTP Messages HTTP-1002 HTTP-1003 IPAD Messages IPAD-1002 LOG Messages LOG-1005 LOG-1006 LOG-1007 LOG-1008 LOG-1011 108 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 131
MS Messages MS-1027 MS-1028 MS-1029 MS-1030 PMGR Messages PMGR-1001 PMGR-1003 PORT Messages PORT-1006 PORT-1007 PORT-1008 PORT-1009 RAS Messages RAS-2001 RAS-2002 RAS-2003 RAS-3005 SEC Messages SEC-1113 SEC-1114 SEC-1337 SEC-3001 SEC-3002 SEC-3003 SEC-3004 SEC-3005 SEC-3006 SEC-3007 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 132
3 SEC Messages SEC-3008 SEC-3009 SEC-3010 SEC-3011 SEC-3012 SEC-3013 SEC-3014 SEC-3015 SEC-3016 SEC-3017 SEC-3018 SEC-3019 SEC-3020 SEC-3021 SEC-3022 SEC-3023 SEC-3024 SEC-3025 SEC-3026 SEC-3027 SEC-3028 SEC-3029 SEC-3030 SEC-3031 SEC-3032 SEC-3033 SEC-3034 SEC-3035 SEC-3036 SEC-3037 SEC-3038 SEC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 133
SEC-3047 SEC-3048 SEC-3049 SEC-3050 SEC-3051 SEC-3061 SEC-3062 SEC-3063 SEC-3064 SEC-3065 SEC-3066 SEC-3067 SEC-4001 SNMP Messages SNMP-1004 SNMP-1005 SNMP-1006 SNMP-1009 SPM Messages SPM-3001 SPM-3002 SPM-3003 SPM-3004 SPM-3005 SPM-3006 SPM-3007 SPM-3008 SPM-3009 SPM-3010 SPM-3011 SPM-3012 SPM-3013 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 134
3 SULB Messages SPM-3014 SPM-3015 SPM-3016 SPM-3017 SPM-3018 SPM-3019 SPM-3020 SPM-3021 SPM-3022 SPM-3023 SPM-3024 SPM-3025 SPM-3026 SPM-3027 SPM-3028 SPM-3029 SULB Messages SULB-1001 SULB-1002 SULB-1003 SULB-1004 SULB-1009 SULB-1010 SULB-1017 SULB-1018 SULB-1020 SULB-1021 SULB-1023 SULB-1024 SULB- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 135
SULB-1034 SULB-1035 SULB-1037 SULB-1038 SULB-1039 SULB-1040 SULB-1041 SULB-1042 SWCH Messages SWCH-1012 SWCH-1013 SWCH-1014 UCST Messages UCST-1021 UCST-1022 UCST-1023 UCST-1024 UCST-1026 UCST-1027 ZONE Messages ZONE-3001 ZONE-3002 ZONE-3003 ZONE-3004 ZONE-3005 ZONE-3006 ZONE-3007 ZONE-3008 ZONE- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 136
3 ZONE Messages ZONE-3012 ZONE-3013 ZONE-3014 ZONE-3015 ZONE-3016 ZONE-3017 ZONE-3018 ZONE-3019 ZONE-3020 ZONE-3021 ZONE-3022 ZONE-3023 ZONE-3024 ZONE-3025 ZONE-3026 114 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 137
FFDC Messages ANV Messages ANV-1002 AUTH Messages AUTH-1014 AUTH-1044 BKSW Messages BKSW-1003 BL Messages BL-1002 BL-1003 BL-1004 BL-1008 BL-1009 BL-1011 BL-1016 BL-1020 BLS Messages BLS-1000 BLS-1001 BM Messages BM-1003 BM-1053 Fabric OS Message Reference 53-1002749-01 Chapter 4 115 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 138
4 C2 Messages C2 Messages C2-1002 C2-1012 C3 Messages C3-1002 C3-1012 CDR Messages CDR-1002 CHS Messages CHS-1002 EM Messages EM-1001 EM-1002 EM-1003 EM-1004 EM-1005 EM-1006 EM-1008 EM-1009 EM-1010 EM-1011 EM-1012 EM-1018 EM-1020 EM-1028 EM-1068 EM-1071 EM-1072 116 Fabric OS Message Reference 53- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 139
FABR Messages FABR-1011 FABR-1013 FABR-1019 FABR-1020 FABR-1021 FABR-1022 FABR-1031 FABR-1054 FABS Messages FABS-1001 FCMC Messages FCMC-1001 FCPH Messages FCPH-1001 FLOD Messages FLOD-1004 HAM Messages HAM-1001 HAM-1006 HAM-1007 HAM-1008 HAM-1009 HAM-1011 HAMK Messages HAMK-1001 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 140
4 HIL Messages HIL Messages HIL-1107 HIL-1108 HIL-1502 HIL-1503 HIL-1506 HIL-1507 HIL-1508 HIL-1509 HIL-1602 HIL-1603 HIL-1611 HLO Messages HLO-1001 HLO-1002 HMON Messages HMON-1001 KSWD Messages KSWD-1001 KSWD-1002 LFM Messages LFM-1004 LOG Messages LOG-1001 LOG-1002 LSDB Messages LSDB-1003 118 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 141
MPTH Messages MPTH-1001 MPTH-1002 NBFS Messages NBFS-1002 PDM Messages PDM-1017 PLAT Messages PLAT-1000 PLAT-1003 PLAT-1004 PLAT-1072 PS Messages PS-1000 RAS Messages RAS-1004 RAS-1005 RCS Messages RCS-1012 RCS-1013 SCN Messages SCN-1001 SCN-1002 Fabric OS Message Reference 53-1002749-01 MPTH - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 142
4 SNMP Messages SNMP Messages SNMP-1004 SYSC Messages SYSC-1001 SYSC-1002 SYSM Messages SYSM-1001 SYSM-1005 SYSM-1006 TRCE Messages TRCE-1008 UCST Messages UCST-1007 WEBD Messages WEBD-1008 ZEUS Messages ZEUS-1002 120 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 143
Administrator's Guide for specific AG-compatibility requirements. • On non-Brocade switches, refer to the manufacturer's documentation to determine whether the switch supports NPIV and supportSave command and contact your switch service provider. Fabric OS Message Reference 121 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 144
not get blocked between two fabrics, although it is not a supported configuration. Recommended Action Configure two or more N_Ports to connect to that the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Check the configuration - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 145
. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 123 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 146
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AG-1010 Message Sending PLOGI failed on N_Port . Message Type LOG Severity WARNING Probable Cause Indicates that there was - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 147
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AG-1013 Message F_Ports mapped to N_Port failed over to other N_Port(s). Message Type LOG Severity INFO Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 148
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AG-1016 Message Failing over F_Ports mapped to N_Port to other N_Port(s). Message Type LOG Severity INFO Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 149
N_Port in port group: is online. Message Type LOG Severity WARNING Probable Cause Indicates that failover across port groups is not supported. Recommended Action Check whether an alternate N_Port is configured in the specified port group using the ag --pgshow command. AG-1020 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 150
. Message Type LOG Severity WARNING Probable Cause Indicates that failover across N_Ports connected to different fabrics is not supported. Recommended Action Change the preferred N_Port settings of the specified F_Port using the ag --prefset command. Choose the preferred N_Port so that it - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 151
. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 129 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 152
5 AG-1027 AG-1027 Message Unable to handle this login request on port because NPIV capability is not enabled on this port. Message Type LOG Severity WARNING Probable Cause Indicates that N_Port ID virtualization (NPIV) is not enabled on the specified port. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 153
AG-1030 5 AG-1030 Message N_Port (ID: ) has been determined to be unreliable. Message Type LOG Severity WARNING Probable Cause Indicates that the port goes online and offline often and therefore the port is marked as unreliable. Recommended Action No action is required. The port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 154
5 AG-1033 AG-1033 Message F_Port to N_Port mapping has been updated for N_Port (). Message Type AUDIT | LOG Class CFG Severity INFO Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the configuration file has been updated. Recommended Action No action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 155
CFG Severity WARNING Probable Cause Indicates that one of the ports is connected to a non-Brocade fabric. Recommended Action Refer to the Access Gateway Administrator's Guide for the supported configuration. AG-1037 Message Trunked N_Port () going offline. If switchshow CLI for the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 156
5 AG-1039 AG-1039 Message F_Port was reset because a WWN mapped device using it, through N_Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 157
transfers; then execute the supportSave command and contact your switch service provider. AG-1043 Message Authentication cannot be negotiated with the LOG Severity WARNING Probable Cause Indicates a device that does not support authentication has tried to log in to the switch when the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 158
5 AN-1001 AN Messages AN-1001 Message Failed to allocate memory: (). Message Type LOG Severity ERROR Probable Cause Indicates that the specified function has failed to allocate memory. Recommended Action Check memory usage on the switch using the memShow command. Restart or - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 159
device for the source of the latency. If the port is a long-distance E_Port, make sure that there are enough buffer credits to service the link distance. AN-1004 Message Congestion bottleneck on port /. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 160
whether there is complete credit loss on a virtual channel (VC) at the specified port are used by port mirroring. Recommended Action Contact your switch service provider for assistance. AN-1012 Message Credits did not return from other end. Complete loss of credits on a VC on slot - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 161
AN-1013 5 AN-1013 Message Performed link reset to recover the port credits on slot port . Message Type LOG | AUDIT Class FABRIC Severity INFO Probable Cause Indicates a credit loss. Recommended Action The port is recovered. No action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 162
the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Restart the system at the next maintenance window. If the problem persists, replace the blade. 140 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 163
memory allocation failure in the software. Recommended Action Restart the system at the next maintenance window. If the problem persists, replace the switch or contact your switch service provider. ANV-1006 Message S,C: HW ASIC Chip fault. Type = 0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 164
chip fault. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. ANV-1008 Message S,C: MAC-VID classifier table is full. No space for new - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 165
. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. ANV-1028 Message Detected excessive Link resets on the port in a second. Slot , Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 166
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1003 Message type has been successfully set to . Message Type LOG Severity INFO Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 167
transfers; then execute the supportSave command and contact your switch service provider. AUTH-1006 Message Failed to open authentication configuration file. Type LOG Severity WARNING Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reinitialize - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 168
authUtil command to make sure the local switch supports the Fibre Channel Authentication Protocol (FCAP) or Type LOG Severity ERROR Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reboot service provider. 146 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 169
then execute the supportSave command and contact your switch service provider. AUTH-1012 Message Authentication is because the remote entity does not support authentication. Recommended Action Verify the authentication request. Usually this problem is transient. The authentication - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 170
| FFDC Severity ERROR Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reinitialize FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1016 Message Invalid value to start HBA authentication port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 171
Type LOG Severity ERROR Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reinitialize FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1020 Message Failed to create timer for authentication: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 172
up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1025 Message Failed to get during - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 173
support the specified authentication value. Recommended Action Check the authentication configuration and reset the supported supportSave command and contact your switch service provider. AUTH-1028 Message Failed to is low on memory. Usually this problem is transient. The authentication may fail. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 174
get a particular authentication value at a certain phase. Usually this problem is transient. The authentication may fail. The Data type is the FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1031 Message Failed to retrieve secret value: port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 175
in authentication protocols to prevent replay attacks. Usually this problem is transient. The authentication may fail. Recommended Action Reinitialize FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1033 Message Disable port due to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 176
up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1035 Message Invalid length in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 177
the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1039 Message Neighboring switch has conflicting authentication policy: Port disabled. Message Type LOG Severity ERROR Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 178
the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1042 Message Port has been disabled, because authentication failed with code '' and explanation ' - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 179
supportSave command and contact your switch service provider. AUTH-1043 Message Failed . Device authentication will be defaulted to OFF, and the the device authentication policy manually using the authUtil command has been disabled as a result. This problem may be transient due to the system CPU - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 180
execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1046 Message has been successfully completed. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 181
AUTH-3001 5 AUTH-3001 Message Event: , Status: success, Info: type has been changed from [] to []. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that an authentication configuration value was set to a specified value. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 182
5 AUTH-3004 AUTH-3004 Message Event: , Status: failed, Info: Neighboring switch has a conflicting authentication policy; Port disabled. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that the specified E_Port was disabled because the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 183
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-3007 Message Event: , Status: failed, Info: Port disabled due to receiving an authentication reject with - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 184
abort (SIGABRT). Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 162 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 185
and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. Additional blade fault messages precede and follow this error, providing more information. Refer to other error messages for recommended action. If the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 186
and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. BL-1006 Message Blade NOT faulted. Peer blade experienced abrupt failure. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 187
the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. BL-1009 Message Blade in slot timed out initializing the chips. Message Type FFDC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 188
the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. On a non-bladed switch, reboot or power cycle the switch. If the message persists, replace the blade or the (non-bladed) switch. 166 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 189
BL-1012 5 BL-1012 Message bport port int. is disabled. status=0x Port will be re-enabled in 1 minute. Message Type LOG Severity ERROR Probable Cause Indicates that the port generated an excessive number of interrupts that may prove unrecoverable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 190
slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. On a non-bladed switch, execute the reboot command to restart the switch. If there is a hardware error, the slotPowerOff or slotPowerOn fails on - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 191
and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. BL-1017 Message Slot Initializing... Message Type LOG Severity INFO Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 192
5 BL-1019 BL-1019 Message Slot , retry , internal port retry initialization, . Message Type LOG Severity INFO Probable Cause Indicates that the slot had internal ports that are not online. Initiated a retry on ports - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 193
BL-1022 5 BL-1022 Message Init Failed: Switch DISABLED because internal ports were not ONLINE, . Message Type LOG Severity CRITICAL Probable Cause Indicates that the switch initiation failed because one or more of the internal ports was not online. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 194
of the switch. The switch will reboot and start cold recovery. Recommended Action Execute the supportSave command and then reboot switch. If the problem persists, replace the switch. BL-1027 Message Blade in slot faulted, boot failed; status 0x 0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 195
BL-1028 5 BL-1028 Message Switch faulted; internal processor was reset before switch init completed. Message Type LOG Severity CRITICAL Probable Cause Indicates that the switch internal processor was reset before the initialization completed. Recommended Action Reboot or power cycle the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 196
and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. BL-1033 Message (slot ,bitmap 0x) No disable acknowledgment from - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 197
BL-1034 5 BL-1034 Message Slot FC Initialization completed. Message Type LOG Severity INFO Probable Cause Indicates that the slot has completed initializing the Fibre Channel (FC) ports. Recommended Action No action is required. BL-1035 Message Slot iSCSI port < - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 198
and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. Additional blade fault messages precede and follow this error, providing more information. Refer to other error messages for recommended action. If the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 199
CRITICAL Probable Cause Indicates that the blade does not support dynamic area mode on the default switch. Recommended Action Turn off the dynamic area (). Try reseating - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 200
mode is enabled on the switch. Message Type LOG Severity WARNING Probable Cause Indicates that the interop mode is turned on in the default switch while powering on the FCoE blade. Recommended Action Disable the interop mode using the interopmode command; then execute the slotPowerOff and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 201
. Contact support for upgrade instructions. Message Type LOG Severity WARNING Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0 is incompatible on the Brocade 7800 switch. Recommended Action Contact your switch service provider - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 202
5 BLS-1000 BLS Messages BLS-1000 Message of GE failed. Please retry the command. Data: inst= st= rsn= fn= oid=. Message Type LOG | FFDC Severity ERROR Probable Cause Indicates that the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 203
ID (0-7)>). Message Type LOG Severity INFO Probable Cause Indicates that the Fabric OS version on the remote end of the tunnel does not support Tape Read Pipelining. Recommended Action No action is required. BLS-1005 Message S,P() [OID 0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 204
an earlier version of firmware than the AP blade. Recommended Action The problem can be corrected by changing the firmware version on either the CP release notes to determine whether a non-disruptive firmware download is supported between the revisions. Because the AP and CP blades cannot - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 205
BM-1004 5 Recommended Action Execute the slotPowerOff and slotPowerOn commands or reseat the affected blade. BM-1004 Message Blade firmware on slot is not consistent with system firmware . Auto-leveling blade firmware to match system firmware. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 206
5 BM-1007 Recommended Action Configure the blade so that it will persistently enable the ports. BM-1007 Message If set, clear EX/VEX/FC Fastwrite configuration for all ports for blade in slot . Message Type LOG Severity INFO Probable Cause Indicates the specified blade was - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 207
BM-1010 5 BM-1010 Message Resetting port configuration and linkcost for all ports for blade in slot . Message Type LOG Severity INFO Probable Cause Indicates the specified blade was detected for the first time after an FC10-6 was previously configured in the same slot. The new - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 208
5 BM-1055 BM-1055 Message Firmwaredownload timed-out for AP. Faulting switch. Message Type LOG Severity WARNING Probable Cause Indicates that firmware download on the application processor (AP) blade has failed. Recommended Action Execute the slotPowerOff and slotPowerOn commands or reseat - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 209
the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Restart the system at the next maintenance window. If the problem persists, replace the blade. Fabric OS Message Reference 187 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 210
number>): best effort QoS will be turned off at next port state change as it is not supported under this configuration Message Type LOG Severity WARNING Probable Cause Indicates that quality of service (QoS) will be turned off automatically at the next port state change because best effort QoS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 211
Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C2-1012 Message S,P(): Link Timeout on internal port ftx= - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 212
reset. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C2-1015 Message Port re-initialized due to Link Reset failure on internal Port S,P - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 213
failure. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C2-1017 Message Blade in Slot failed due to unavailability of ports in the internal - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 214
5 C2-1019 C2-1019 Message S,C: HW ASIC Chip TXQ FID parity error threshold reached type = 0x. Message Type LOG Severity WARNING Probable Cause Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 215
port. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C2-1028 Message Detected excessive Link resets on the port in a second. Slot , Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 216
the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Reboot the system at the next maintenance window. If the problem persists, replace the blade. 194 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 217
number>): best effort QoS will be turned off at next port state change as it is not supported under this configuration. Message Type LOG Severity WARNING Probable Cause Indicates that quality of service (QoS) will be turned off automatically at the next port state change because best effort QoS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 218
traffic. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1011 Message Detected a complete loss of credit on internal back-end VC: Slot , Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 219
the link is reset. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. Fabric OS Message Reference 197 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 220
failure. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1016 Message Port is faulted due to port re-initialization failure on internal Port S - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 221
. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1019 Message S,C: HW ASIC Chip TXQ FID parity error threshold reached type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 222
traffic. Recommended Action When this error occurs, the software will automatically recover from the error and no action is required. However, if the problem persists, replace the blade. C3-1023 Message Single RDY/Frame Loss detected and recovered on Slot ,Port ( - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 223
port. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1028 Message Detected excessive Link resets on the port in a second. Slot , Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 224
5 CAL-1001 CAL Messages CAL-1001 Message Switch offline requested by remote domain . Message Type LOG Severity INFO Probable Cause Indicates that the specified remote domain requested the local domain to be disabled. Recommended Action Check the error message log on the remote - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 225
CCFG-1001 5 CCFG Messages CCFG-1001 Message Failed to initialize , rc = . Message Type LOG Severity ERROR Probable Cause Indicates that the initialization of a module within the Converged Enhanced Ethernet (CEE) configuration management daemon has failed. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 226
5 CCFG-1004 CCFG-1004 Message Configuration replay failed due to missing system startup configuration file. Message Type LOG Severity ERROR Probable Cause Indicates that the startup configuration file has been moved or deleted and therefore replaying the system configuration has failed. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 227
CCFG-1008 5 Recommended Action No action is required. CCFG-1008 Message CMSH init failed: . Message Type LOG Severity ERROR Probable Cause Indicates that the CEE Management Shell (CMSH) initialization has failed. Recommended Action No action is required. CCFG-1009 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 228
5 CCFG-1011 CCFG-1011 Message Linecard configuration mismatch on slot . Message Type LOG Severity INFO Probable Cause Indicates that the inserted line card is different from the pre-configured line card on the specified slot. Recommended Action Execute the no linecard command to remove - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 229
the fastBoot command on the switch. CDR-1003 Message S,C: HW ASIC Chip error type = 0x. If the problem persists, blade may need to be reset or replaced. Message Type LOG Severity WARNING Probable Cause Indicates an internal error in the application - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 230
Action Restart the system at the next maintenance window. If the problem persists, replace the blade. CDR-1005 Message S,P< as it is not supported under this configuration. Message Type LOG Severity WARNING Probable Cause Indicates that quality of service (QoS) will be turned - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 231
CDR-1007 5 CDR-1007 Message S,C: Internal link errors have been reported, no hardware faults identified, continuing to monitor for errors: flt1:0x, flt2:0x thresh1:0x. Message Type LOG Severity WARNING Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 232
Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1011 Message S,P(): Link Timeout on internal port ftx= - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 233
reset. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1015 Message Port re-initialized due to Link Reset failure on internal Port S,P - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 234
. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1018 Message Blade in Slot faulted due to Link reset threshold value exceeded. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 235
. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1028 Message Detected excessive Link resets on the port in a second. Slot , Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 236
5 CHS-1002 CHS Messages CHS-1002 Message ki_gd_register_action failed with rc = . Message Type LOG | FFDC Severity ERROR Probable Cause Indicates an internal error. Recommended Action To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 237
CHS-1005 5 CHS-1005 Message Diag attach failed during recovery, disabling slot = . Message Type LOG Severity ERROR Probable Cause Indicates that the diagnostic blade attach operation has failed during failover or recovery. Recommended Action For a bladed switch, execute the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 238
5 CNM-1001 CNM Messages CNM-1001 Message Failed to allocate memory: (). Message Type LOG Severity ERROR Probable Cause Indicates that the specified function has failed to allocate memory. Recommended Action Check memory usage on the switch using the memShow command. Restart or - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 239
is on the switch. Message Type LOG Severity INFO Probable Cause Indicates that the crypto service is enabled or disabled on the switch. Recommended Action No action is required. CNM-1005 Message Posting event CNM_EVT_GRP_LEADER_ELECTED Name [], WWN []. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 240
5 CNM-1008 Recommended Action No action is required. CNM-1008 Message Posting event CNM_EVT_NODE_EJECT nodeName [], WWN []. Message Type LOG Severity INFO Probable Cause Indicates that the specified node is ejected from the Encryption Group (EG). Recommended Action No action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 241
CNM-1011 5 CNM-1011 Message Posting event CNM_EVT_NODE_JOIN_TIMEOUT nodeName [], WWN [], ipaddress []. Message Type LOG Severity INFO Probable Cause Indicates the node join timeout. Recommended Action Take the peer node offline, and rejoin the node to Encryption Group - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 242
5 CNM-1015 Recommended Action No action is required. CNM-1015 Message Posting event Potential Cluster Split condition. Message Type LOG Severity INFO Probable Cause Indicates a Potential Cluster Split condition. Recommended Action No action is required. CNM-1016 Message Posting event - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 243
CNM-1018 5 CNM-1018 Message Got CNM_FSM_EVT_JOIN_REQ when already a member, My assigned name [], dropping request. Message Type LOG Severity INFO Probable Cause Indicates the node is already a member of the Encryption Group (EG). Recommended Action No action is required. CNM-1019 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 244
5 CNM-1021 CNM-1021 Message Failed to sign the node authentication message, admission control might fail. Message Type LOG Severity INFO Probable Cause Indicates that node admission control has failed. Recommended Action No action is required. CNM-1022 Message Operation not allowed on GL - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 245
CNM-1025 5 Recommended Action No action is required. CNM-1025 Message Operation not allowed, as member is active with the Cluster. Eject member node and retry. Message Type LOG Severity INFO Probable Cause Indicates an operation is not allowed on a member node. Recommended Action Eject - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 246
5 CNM-1028 CNM-1028 Message Certfile already exists. No need to sync up. Message Type LOG Severity INFO Probable Cause Indicates that the certificate file for the node already exists. Recommended Action No action is required. CNM-1029 Message Certfile - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 247
CNM-1032 5 Recommended Action No action is required. CNM-1032 Message Certfile size does not match cert file size sent by GL. Message Type LOG Severity WARNING Probable Cause Indicates that there is a size mismatch between a node's certificate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 248
5 CNM-1035 CNM-1035 Message Cluster is in degraded state. Posting degrade event. Message Type LOG Severity WARNING Probable Cause Indicates an event is being posted to specify the cluster is in a degraded state. Recommended Action No action is required. CNM-1036 Message All the active nodes - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 249
CNM-1038 5 CNM-1038 Message Split-Brain Arbitration won, majority GL Node, remote:local [:]. Message Type LOG Severity INFO Probable Cause Indicates that split-brain arbitration is won. Recommended Action No action is required. CNM-1039 Message Split-Brain - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 250
5 CNM-1042 Recommended Action No action is required. CNM-1042 Message Completed updating persistent Cluster DB. Message Type LOG Severity INFO Probable Cause Indicates the persistent database update is complete. Recommended Action No action is required. CNM-1043 Message Received HBT from - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 251
CNM-1045 5 CNM-1045 Message Member node [] is having dual IP stack.Registering member node with dual IP in an EG with only IPv6 is not allowed. Message Type LOG Severity ERROR Probable Cause Indicates that the member node with dual IP stack was registered with the IPv6 Encryption Group ( - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 252
5 CNM-1049 Recommended Action No action is required. CNM-1049 Message Failed to define node, Node Name []. Message Type LOG Severity ERROR Probable Cause Indicates the failure to define the node object. Recommended Action No action is required. CNM-1050 Message Node Admission - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 253
CNM-1052 5 CNM-1052 Message Member node registered with another Encryption Group. To proceed eject the member node [] from other EG. Message Type LOG Severity ERROR Probable Cause Indicates that the member node is registered with another Encryption Group (EG). Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 254
5 CNM-1055 CNM-1055 Message Got CNM_FSM_EVT_JOIN_REQ when already a member from same GL node, rejoining EG with GL []. Message Type LOG Severity INFO Probable Cause Indicates the node is rejoining the Encryption Group (EG). Recommended Action No action is required. CNM-1056 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 255
CNM-1058 5 CNM-1058 Message Posting event CNM_EVT_OFFLINE Slot [], WWN [], IP [], flags []. Message Type LOG Severity INFO Probable Cause Indicates that the encryption engine is removed from the Encryption Group (EG). Recommended Action No action is required. CNM-1059 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 256
5 CNM-1062 Recommended Action No action is required. CNM-1062 Message Copied certificate to [] due to change in IP. Message Type LOG Severity INFO Probable Cause Indicates that the certificate was copied to the file with new IP name. Recommended Action No action is required. CNM- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 257
CNM-3003 5 CNM-3003 Message Event: cryptocfg Status: success, Info: Membernode \"\" added to encryption group. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the specified member node was added to an encryption group. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 258
5 CNM-3006 CNM-3006 Message Event: cryptocfg Status: success, Info: Heartbeat miss count set to . Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the heartbeat miss value was set. Recommended Action No action is required. CNM-3007 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 259
CNM-3009 5 CNM-3009 Message Event: cryptocfg Status: success, Info: registered. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the specified member node was registered. Recommended Action No action is required. CNM-3010 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 260
5 CNM-3012 CNM-3012 Message Deleteing an EG with LUNs setup for encryption can lead to LUNs being disabled if Encryption Group name is not preserved (). Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the Encryption Group (EG) was deleted. Recreate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 261
CONF-1000 5 CONF Messages CONF-1000 Message configDownload completed successfully . Message Type LOG | AUDIT Class CFG Severity INFO Probable Cause Indicates that the configDownload operation was initiated and completed successfully. The Info about the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 262
5 CONF-1021 CONF-1021 Message configUpload not permitted . Message Type LOG Severity INFO Probable Cause Indicates that a configUpload operation is not permitted. There are many possible causes. Recommended Action Execute the errShow command to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 263
CONF-1024 5 CONF-1024 Message configUpload failed . Message Type LOG Severity INFO Probable Cause Indicates a configUpload operation has failed. Recommended Action Execute the errShow command to view the error log. Correct the error and execute the configUpload command again. CONF- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 264
5 CONF-1032 CONF-1032 Message configRemove completed successfully . Message Type LOG Severity INFO Probable Cause Indicates that the configRemove command was initiated and completed successfully. Recommended Action No action is required. CONF-1040 Message configDefault Failed. < - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 265
CONF-1042 5 CONF-1042 Message Fabric Configuration Parameter changed to Message Type LOG | AUDIT Class CFG Severity INFO Probable Cause Indicates that the fabric configuration parameter value has been changed. Recommended Action No action is required. CONF-1043 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 266
5 CTAP-1001 CTAP Messages CTAP-1001 Message Key acquisition for . Message Type LOG Severity INFO Probable Cause Indicates that a change in the tape pool database has triggered the key acquisition process for each pool. Recommended Action Do not start - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 267
physical WWN>, LUN ID: . Message Type LOG Severity INFO Probable Cause Indicates that the first-time encryption, key expired, or manual re-key operation is performed. The operation has been started, completed, failed, or cancelled. Recommended Action No action is required. CVLC-1002 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 268
5 CVLC-1004 CVLC-1004 Message Forceful encryption LUN removal while re-key session is still active. Container: , Initiator: , LUN ID: . Message Type LOG Severity INFO Probable Cause Indicates that the encryption LUN was forcefully removed - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 269
CVLC-1007 5 CVLC-1007 Message Removal of encryption LUN is not allowed when decrypt of existing data is enabled. Container: , Initiator: , LUN ID: . Message Type LOG Severity ERROR Probable Cause Indicates that there has been an attempt - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 270
>. Message Type LOG Severity ERROR Probable Cause Indicates that the tape container is configured with non-Brocade mode but there is no valid license. Recommended Action Obtain a license for non-Brocade mode. CVLC-1011 Message Third party license is required for encryption LUN in third party - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 271
CVLC-1013 5 CVLC-1013 Message Unable to retrieve key record from the key archive. Container: , Initiator: , LUN ID: . Message Type LOG Severity ERROR Probable Cause Indicates that the encryption engine is unable to retrieve the key - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 272
5 CVLC-1016 CVLC-1016 Message LUN is out of read only mode. Reason: . Container: , Initiator: , LUN ID: . Message Type LOG Severity INFO Probable Cause Indicates that the LUN is set to read/write - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 273
CVLC-1019 5 CVLC-1019 Message Metadata exists while data state is clear text. Container: , Initiator: , LUN ID: . Message Type LOG Severity ERROR Probable Cause Indicates that the data state in the LUN configuration is cleartext, but - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 274
5 CVLC-1022 CVLC-1022 Message User provided key ID is ignored while data state is clear text. Container: , Initiator: , LUN ID: . Message Type LOG Severity INFO Probable Cause Indicates that the key ID - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 275
CVLC-1025 5 CVLC-1025 Message Secondary Metadata exists for encrypted LUN not configured with -newLUN option. Container: , Initiator: , LUN ID: . Message Type LOG Severity ERROR Probable Cause Indicates that the secondary metadata exists - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 276
Initiator: , LUN ID: . Message Type LOG Severity WARNING Probable Cause Indicates that performing first-time encryption or manual re-key of primary LUN without splitting the mirror. Recommended Action Break the mirror and re-establish the mirror after re-key on - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 277
CVLC-1031 5 CVLC-1031 Message Primary LUN is restored from mirror LUN. LUN in read-only mode. Container: , Initiator: , LUN ID: . Message Type LOG Severity WARNING Probable Cause Indicates that a re-keyed primary LUN may have been - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 278
ID: because . Message Type LOG Severity INFO Probable Cause Indicates that the first-time encryption, key expired, or manual re-key operation failed. Recommended Action No action is required. CVLC-1035 Message A decommissioned LUN has been added back as encrypted LUN - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 279
CVLC-1041 5 CVLC-1041 Message . Container: , Initiator: , LUN ID: . Message Type LOG Severity WARNING Probable Cause Indicates that the host write operation on secondary metadata block region - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 280
5 CVLM-1001 CVLM Messages CVLM-1001 Message Failed to allocate memory: (). Message Type LOG Severity ERROR Probable Cause Indicates that the specified function has failed to allocate memory. Recommended Action Check the memory usage on the switch using the memShow command. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 281
encryption group have different configurations. Recommended Action Synchronize the configuration in the cluster group using the cryptocfg --commit command. CVLM-1005 Message Crypto service is on the switch. Message Type LOG Severity INFO Probable Cause Indicates that the crypto - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 282
5 CVLM-1008 Recommended Action Run the cryptocfg --commit command again. CVLM-1008 Message The member ( ) of HAC () is not in the fabric. Message Type LOG Severity WARNING Probable Cause Indicates that the member of the HA cluster (HAC) is not in the fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 283
CVLM-1011 5 CVLM-1011 Message The HAC failover occurs at EE ( ). Message Type LOG Severity INFO Probable Cause Indicates that the HA cluster (HAC) failover occurs at the encryption engine. Recommended Action No action is required. CVLM-1012 Message The HAC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 284
5 CVLM-1014 CVLM-1014 Message RD zone getting deleted for which there is no Host/Target (/) L2 zone exists in effective configuration. Message Type LOG Severity ERROR Probable Cause Indicates deletion of Frame Redirect (RD) zone and there is no corresponding Layer - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 285
CVLM-3001 5 CVLM-3001 Message Event: cryptocfg Status: success, Info: Failback mode set to . Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the failback mode was set. Recommended Action No action is required. CVLM-3002 Message Event: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 286
5 CVLM-3004 CVLM-3004 Message Event: cryptocfg Status: success, Info: Cluster member added to HA cluster \"\". Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that an HA cluster member was added. Recommended Action No action is required. CVLM- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 287
from EE / to EE /. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that a manual failback was performed to an encryption engine. Recommended Action No action is required. Fabric OS Message Reference 265 53 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 288
5 CVLM-3010 CVLM-3010 Message Event: cryptocfg Status: success, Info: Move crypto target container \"\" to EE /. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the specified crypto-target container was moved to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 289
CVLM-3013 5 CVLM-3013 Message Event: cryptocfg Status: success, Info: LUN , attached through Initiator \"\", added to crypto target container \"\". Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that a LUN was added - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 290
5 CVLM-3016 CVLM-3016 Message Event: cryptocfg Status: success, Info: LUN , attached through Initiator \"\" in crypto target container \"\", enabled. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the specified - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 291
specified tape pool was modified. Recommended Action No action is required. CVLM-3020 Message Event: cryptocfg Status: success, Info: Manual rekey of LUN attached through Initiator \"\" in crypto tgt container \"\". Message Type AUDIT | LOG Class - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 292
5 CVLM-3022 CVLM-3022 Message Event: cryptocfg Status: success, Info: Resume rekey of LUN attached through Initiator \"\" in crypto tgt container \"\". Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that a resume re- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 293
CVLM-3025 5 CVLM-3025 Message Event: cryptocfg Status: started, Info: Decommission of device (container initiator , LUN ). Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the decommission operation has started. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 294
5 CVLM-3028 CVLM-3028 Message Event: cryptocfg Status: success, Info: SRDF mode set to . Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the Symmetrix Remote Data Facility (SRDF) mode was set. Recommended Action No action is required. 272 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 295
DOT1 Messages DOT1-1001 Message 802.1X is enabled globally. Message Type LOG Severity INFO Probable Cause Indicates that 802.1X is enabled globally. Recommended Action No action is required. DOT1-1002 Message 802.1X is disabled globally. Message Type LOG Severity INFO Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 296
that 802.1X authentication has failed on the specified port due to incorrect credentials or the remote authentication dial-in user service (RADIUS) server is not functioning properly. Recommended Action Check the credentials configured with the supplicant and the RADIUS server. 274 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 297
for authentication. Message Type LOG Severity CRITICAL Probable Cause Indicates that there is no remote authentication dial-in user service (RADIUS) server available for authentication. Recommended Action Execute the aaaConfig --show command to verify that the configured RADIUS servers - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 298
5 DOT1-1010 DOT1-1010 Message Port is set in auto mode. Message Type LOG Severity INFO Probable Cause Indicates that the specified port is set to auto mode. Recommended Action No action is required. 276 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 299
Single bit errors are corrected, but other errors indicate either software errors or problems with the target system DRAM. Single bit errors can be expected to occur errors and all other error types should be reported to technical support for further action. ECC-1001 Message ECC Error - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 300
within the operational range of the switch. Refer to the Hardware Reference Manual for the environmental temperature range of your switch. Execute the fanShow command blade does not have any hardware problems. For the Brocade 300 and 6510, replace the switch. 278 Fabric OS Message Reference 53- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 301
type string and an optional number to identify the unit, slot, or port. The Brocade 300 switch has 4 fans and 1 power supply, but these parts cannot be entire switch is a FRU. Recommended Action Reseat the FRU. If the problem persists, replace the FRU. EM-1005 Message has faulted. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 302
notification from the specified field-replaceable unit (FRU). This may indicate a hardware malfunction in the FRU. Recommended Action Reseat the FRU. If the problem persists, replace the FRU. EM-1010 Message Received unexpected power down for But still has power. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 303
and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the problem still persists, replace the FRU. EM-1013 Message Failed to update FRU information for . Message Type LOG Severity ERROR Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 304
checks during a cold boot. Recommended Action Monitor the switch. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 282 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 305
firmware version (Pre 4.4), cannot allow HA Sync. Message Type LOG Severity WARNING Probable Cause Indicates that the current chassis configuration option is not supported by the firmware on the standby control processor (CP). This is true even if the standby CP comes up and is operational. High - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 306
is faulted, it's an FCoE blade and the Ethernet switch service is not enabled. Please run . Message Type FFDC | The return code is for internal use only. This can indicate a significant hardware problem. The FRU ID value is composed of a FRU type string and an - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 307
FRU) is intended for use. Refer to the appropriate Hardware Reference Manual for instructions on inserting the switch blades. EM-1033 Message CP in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 308
(FRU) is not present on the switch. If the FRU is a World Wide Name (WWN) card, the default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU. If the problem persists, restart or power cycle the switch. Execute the diagPost command to make sure that Power-On - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 309
or read incorrectly, or corrupted in the object database, which contains information about all FRUs. Recommended Action Reseat the FRU. If the problem persists, replace the FRU. EM-1043 Message Can't power . Message Type LOG Severity WARNING Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 310
of the power supply. • Down - A newly inserted port blade was not powered on because there was not enough power available. Recommended Action The Brocade 24000 requires only a single power supply for a fully populated chassis; however, you must always operate the system with at least two power - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 311
If the error is due to the backplane, the CP type (CP256) is not supported on that chassis (backplane revision D2). Remove the blade from the chassis. If the Probable Cause Indicates that the Inter-Integrated Circuit (I2C) bus problems have been resolved and I2C access to the field-replaceable unit - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 312
5 EM-1050 Recommended Action No action is required. EM-1050 Message FRU removal detected. Message Type LOG Severity INFO Probable Cause Indicates that a field-replaceable unit (FRU) of the type and location specified by the FRU ID value was removed from the chassis. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 313
is being automatically reset because of a known resetable transient problem such as an application-specific integrated circuit (ASIC) 1059 Message with ID may not be supported on this platform, check FOS firmware version as a possible cause. Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 314
. Until this is done, the system will remain out of synchronization. EM-1062 Message Blade in slot faulted as it exceeds the maximum support limit of blades with Blade ID in the chassis. Message Type LOG Severity CRITICAL Probable Cause Indicates that too many - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 315
error was detected, and you have selected to power off the problem blade when such a condition occurred. Recommended Action Contact your switch service provider for assistance. EM-1065 Message SAS Virtualization Services are not available due to incompatibility between the FOS and SAS versions - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 316
the switch. Recommended Action Restart or power cycle the switch. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. EM-1069 Message Slot is being - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 317
EM-1070 5 EM-1070 Message Slot is being powered on. Message Type LOG Severity INFO Probable Cause Indicates that the blade in the specified slot is being intentionally powered on. Recommended Action No action is required. EM-1071 Message Unit in with ID < - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 318
bladed systems. Recommended Action On bladed systems, reseat the specified FRU. On non-bladed switches, restart or power cycle the switch. If the problem persists, perform the following actions: • Execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 319
, identify the down-level switch or switches that do not support the Coordinated HotCode protocol, and upgrade the down-level switches. restart the firmware download on this switch. Note that upgrading a down-level Brocade switch in a mixed interop fabric may still cause data traffic disruption. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 320
5 ESS-1004 ESS-1004 Message The resume message is rejected by the domain . Message Type LOG Severity WARNING Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the resume message which prevented the protocol from completing. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 321
ESS-1009 5 ESS-1009 Message Fabric Name Mismatch - local() remote( - received from domain ). Message Type AUDIT | LOG Class FABRIC Severity WARNING Probable Cause Indicates that the specified fabric name is not unique for this fabric. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 322
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. ESW-1002 Message Security violation: Unauthorized device tries to FLOGI to port . Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 323
or power cycle the switch. ESW-1006 Message HA state out of sync: Standby CP (ver = ) does not support NPIV functionality. (active ver = , NPIV devices = ). Message Type LOG Severity WARNING Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 324
the port configuration that already has the area swapped. Recommended Action Replace the blade with ports that support port swap. Then swap ports back to the port's default area. Refer to the Fabric OS Administrator's Guide for more information. 302 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 325
EVMD-1001 5 EVMD Messages EVMD-1001 Message Event could not be sent to remote proxy = . Message Type LOG Severity WARNING Probable Cause Indicates that the event could not be sent to remote proxy. This could happen if the remote proxy switch cannot be reached through - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 326
ILS bad size , wanted . Message Type LOG Severity WARNING Probable Cause Indicates that an internal link service (ILS) information unit of invalid size has been received. The neighbor switch has sent a payload with an invalid size. 304 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 327
automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1004 Message port: , req iu: 0x< data, the system will discard the frame. If it is due to problems with the kernel, the system will recover by performing a failover. If the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 328
has already been deallocated. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe memory corruption ; then run the supportSave command and contact your switch service provider. FABR-1008 Message . Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 329
parameter (EFP) type. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action The fabric daemon will discard the FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1011 Message . Message Type LOG | - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 330
FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1013 Message No Memory: pid= fabric module to allocate. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action The system will recover by failing - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 331
FABR-1015 5 FABR-1015 Message FICON Insistent DID max retry exceeded: All E_Ports will be disabled. Switch is isolated. Message Type LOG Severity ERROR Probable Cause Indicates that the application exceeded request domain ID (RDI) requests for the insistent domain ID. All E_Ports are - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 332
Reference for more information about the fabricPrincipal command. FABR-1019 Message Critical fabric size () exceeds supported configuration (). Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that this switch is a value-line switch - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 333
limit. Contact your switch provider to obtain a full fabric license. FABR-1022 Message Fabric size () exceeds supported configuration (). Fabric limit timer () started from . Message Type FFDC | LOG Severity CRITICAL Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 334
5 FABR-1024 FABR-1024 Message Initializing fabric size limit timer . Message Type LOG Severity INFO Probable Cause Indicates that the fabric size has exceeded the limit set by your value-line switches. Value-line switches have a limited fabric size (for example, a specified limit - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 335
the fabric exhausted the maximum number of retries sending internal link service (ILS) to the iswitch daemon on the specified E_Port. Trunk Area. You must manually enable the port or the port remains disabled forever. Refer to the Fabric OS Administrator's Guide for more information. Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 336
cable to a port to match with the same Master Trunk Area, or disable Trunk Area. You must manually enable the port or the port remains disabled forever. Refer to the Fabric OS Administrator's Guide for more information. FABR-1036 Message F_Port trunks are only allowed on Trunk Area enabled port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 337
FABR-1038 5 FABR-1038 Message Trunking license not present with F port trunking enabled. Persistently disabling port . Message Type LOG Severity INFO Probable Cause Indicates the specified port is being disabled because F_Port trunking is enabled without a - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 338
persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. FABR-1043 Message Detected Fabric ID conflict with remote (not neighbor) switch (domain ), FID . No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 339
Probable Cause Indicates that there are no areas available to assign to the port during port creation. Recommended Action Move some ports out of the default switch to make areas available. Fabric OS Message Reference 317 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 340
5 FABR-1048 FABR-1048 Message Detected Fabric ID (FID inherited) conflict with switch (domain , FID ). Message Type LOG Severity ERROR Probable Cause Indicates that a switch in the fabric has a Fabric ID (FID) conflict with the inherited FID of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 341
FABR-1051 5 FABR-1051 Message D-Port test failed for slot and port . Message Type LOG Severity ERROR Probable Cause Indicates that the D_Port test failed for the given slot and port due to one of the following reasons: • The small form-factor pluggable (SFP) fault - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 342
5 FABR-1054 FABR-1054 Message Rebooting the standby as it received an update before port [] is expanded. Message Type LOG | FFDC Severity INFO Probable Cause Indicates that the standby control processor (CP) did not have the port because the port expand operation is still in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 343
Cause Indicates that the system is low on memory and cannot allocate more memory for new operations. This is usually an internal Fabric OS problem or file corruption. The Description of memory need variable specifies the memory size that was being requested. The value can be any whole number - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 344
-board systems). If the message persists, run the firmwareDownload command to update the firmware. FABS-1006 Message : object unit . Message Type LOG Severity WARNING Probable Cause Indicates that there is no device in the slot - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 345
Cause Indicates that the Fabric OS has detected an invalid value in an object status field. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 346
an unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the header, inability to read the FRU header, or the blade may not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 347
inability to read the FRU header, or the FRU may not be supported by this platform or Fabric OS version. Recommended Action Verify that the the FRU. If this is a valid FRU and reseating does not solve the problem, replace the FRU FABS-1015 Message []:Request to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 348
CP. The AP and CP blades cannot communicate. Recommended Action The problem can be corrected by changing the firmware version on either the CP release notes to determine whether a non-disruptive firmware download is supported between the revisions. Because the AP and CP blades cannot communicate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 349
FCMC-1001 5 FCMC Messages FCMC-1001 Message System is low on memory and has failed to allocate new memory. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for an information unit (IU). Recommended Action A - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 350
5 FCOE-1001 FCOE Messages FCOE-1001 Message calloc failed for . Message Type LOG Severity ERROR Probable Cause Indicates a memory failure. Recommended Action Check the memory usage on the switch using the memShow command. FCOE-1002 Message Max logingroup limit reached at . - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 351
from the login group has failed. Recommended Action Execute the supportSave command and restart the system. If the problem persists, contact your switch service provider. FCOE-1005 Message : membership check failed in logingroup: . Message Type LOG Severity ERROR Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 352
or initialization of the FCoE trace has failed. Recommended Action Execute the supportSave command and restart the system. If the problem persists, contact your switch service provider. FCOE-1012 Message Request to delete port from VLAN failed. Message Type LOG Severity ERROR Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 353
add ports to the specified VLAN has failed. Recommended Action Execute the supportSave command and restart the system. If the problem persists, contact your switch service provider. FCOE-1015 Message Request to add MACs to Layer 2 for ifindex 0x failed, rc:. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 354
5 FCOE-1019 Recommended Action Disable the active FCoE session on VLAN using the no fcoe command and try adding the FCMAP again. FCOE-1019 Message FLOGI ignored as FCMAP is not configured on FCoE VLAN. Message Type LOG Severity WARNING Probable Cause Indicates that FCMAP has not been - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 355
login (FLOGI) before it can send an FDISC. Recommended Action It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance. FCOE-1025 Message FCoE logout received on FIP VN port. Message Type LOG Severity WARNING Probable Cause Indicates pre-FIP logout - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 356
do not match the original FLOGI. Recommended Action It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance. FCOE-1027 Message : :::::. Message Type LOG Severity ERROR Probable Cause Indicates that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 357
between the fabric login (FLOGI) and FDISC. Recommended Action It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance. FCOE-1030 Message Version mismatch between FIP LOGO and root VN port. Message Type LOG Severity WARNING Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 358
map assigned to the FCoE map to accommodate the PFC for the specified FCoE priority or change the FCoE priority using the fabric-map default command under the FCoE configuration mode. FCOE-1037 Message Logingroup dropped for switch WWN: , due to name conflict while merging. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 359
FCOE-1038 5 FCOE-1038 Message logingroup# () created. Message Type LOG Severity INFO Probable Cause Indicates that the specified login group is added to the switch login group table. Recommended Action No action is required. FCOE-1039 Message Logingroup - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 360
5 FCOE-1042 Recommended Action No action is required. FCOE-1042 Message FCoE login configuration transaction saved fabric-wide. Message Type LOG Severity INFO Probable Cause Indicates that the FCoE login configuration transaction is saved fabric-wide. Recommended Action No action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 361
FCOE-1045 5 FCOE-1045 Message FCoE port is configured as VE port. Message Type LOG Severity INFO Probable Cause Indicates that the specified FCoE port is configured as a virtual expansion (VE) port. Recommended Action No action is required. FCOE-1046 Message fcoed.conf file - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 362
5 FCOE-1048 Recommended Action No action is required. 340 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 363
Also, consider upgrading the device firmware. FCPD-1003 Message Probing failed on which is possibly a private device which is not supported in this port type. Message Type LOG Severity INFO Probable Cause Indicates that device probing has failed because private devices will not - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 364
5 FCPD-1003 Recommended Action The Brocade 4100, 4900, 5000, 7500, and AP 7600 do not support private loop devices. Refer to the switch vendor for a list of other port types that support private devices for inclusion into the fabric. 342 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 365
requires authentication when device authentication policy is set to ON. Message Type LOG Severity WARNING Probable Cause Indicates a device that does not support authentication has tried to log in to the switch when the device authentication policy is in ON status on the switch. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 366
5 FCPH-1004 FCPH-1004 Message NPIV port has same Port WWN as old port with pid 0x as part of duplicate Port WWN detection policy. Message Type LOG Severity WARNING Probable Cause Indicates that the specified N_Port ID virtualization (NPIV) port has the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 367
FCR-1001 5 FCR Messages FCR-1001 Message FC router proxy device in edge created at port . Message Type LOG Severity INFO Probable Cause Indicates that a proxy device at a port in the edge fabric has been imported at the specified port. Recommended Action No action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 368
5 FCR-1004 FCR-1004 Message FC router physical devices offline at port . Message Type LOG Severity INFO Probable Cause Indicates that one or more physical devices connected to the specified port have gone offline. Recommended Action Verify that the devices were intended to be - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 369
FCR-1007 5 FCR-1007 Message FC router LSAN zone deleted at port . Message Type LOG Severity INFO Probable Cause Indicates that a logical storage area network (LSAN) zone attached to the specified port was deleted in the edge fabric. Recommended Action No action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 370
5 FCR-1010 FCR-1010 Message FC router LSAN zone disabled at port . Message Type LOG Severity INFO Probable Cause Indicates that a logical storage area network (LSAN) zone is disabled in the edge fabric attached to the specified port. Recommended Action No action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 371
FCR-1013 5 FCR-1013 Message Phantom FSPF database exchange completed on port . Message Type LOG Severity INFO Probable Cause Indicates that the specified EX_Port has completed the fabric shortest path first (FSFP) database exchange. Recommended Action No action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 372
device port resources. Use the fcrProxyDevshow command to view how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove, zoneDelete, cfgDelete, and cfgDisable in the edge fabric. Proxy devices - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 373
FCR-1021 5 3. Use zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge fabrics. 4. Use the portEnable command on each EX_Port, one at a time, and verify that this error is not reported again. FCR-1021 Message Local LSAN device entries exhausted. Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 374
5 FCR-1024 FCR-1024 Message Local LSAN zone device entries for edge LSAN exhausted. Message Type LOG Severity WARNING Probable Cause Indicates that the number of devices in a logical storage area network (LSAN) defined in the edge fabric is greater than allowed by the local LSAN - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 375
FCR-1027 5 FCR-1027 Message In slot , Port WWN roll over. Message Type LOG Severity INFO Probable Cause Indicates that the port World Wide Name (WWN) pool has rolled over in the specified slot, and WWN entries not detected to be in use are reused as needed. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 376
5 FCR-1030 FCR-1030 Message Physical device came online at fabric . Message Type LOG Severity INFO Probable Cause Indicates that the physical device World Wide Name (WWN) came online in the specified fabric. Recommended Action No action is required. FCR-1031 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 377
FCR-1034 5 Recommended Action No action is required. FCR-1034 Message LSAN zone added in backbone fabric. Message Type LOG Severity INFO Probable Cause Indicates that a new logical storage area network (LSAN) zone was added to the backbone fabric. Recommended Action No action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 378
5 FCR-1037 FCR-1037 Message LSAN zone disabled in the backbone fabric. Message Type LOG Severity INFO Probable Cause Indicates that a logical storage area network (LSAN) zone is disabled in the backbone fabric. Recommended Action No action is required. FCR-1038 Message Total zone entries - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 379
FCR-1040 5 FCR-1040 Message Proxy device deleted in the backbone fabric. Message Type LOG Severity INFO Probable Cause Indicates that a proxy device created in the backbone fabric was deleted. Recommended Action No action is required. FCR-1041 Message LSAN zone device removed in the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 380
Indicates an incoming exchange link parameter (ELP) command that is not supported. Recommended Action Use the portEnable and portDisable to enable or disable the port. If the problem persists, contact your switch service provider. FCR-1053 Message Port was disabled, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 381
If the message persists, collect switch information using the supportSave command, and contact your switch service provider. FCR-1055 Message Switch with domain ID does not support backbone to edge imports. Message Type LOG Severity INFO Probable Cause Indicates that a switch that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 382
5 FCR-1057 FCR-1057 Message EX_Port() incompatible long distance parameters on link. Message Type LOG Severity ERROR Probable Cause Indicates that the port, which is configured in long distance mode, has incompatible long distance parameters. Recommended Action Check the port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 383
Indicates that a backbone fabric was built on the specified port. Recommended Action No action is required. FCR-1062 Message Port disabled, system only supports EX/VEX_ports. Message Type LOG Severity INFO Probable Cause Indicates that the maximum number of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 384
5 FCR-1063 FCR-1063 Message Fabric for switch with domain ID: mismatch with local fabric ID . Message Type LOG Severity INFO Probable Cause Indicates that the fabric ID of the switch does not match the local switch. Recommended Action Run the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 385
Action If the fabric split, merge the fabrics and manually re-enable the port. If there is another fabric with in connected fabric exceeds the maximum number supported by the Fibre Channel. The limit 2 (disabled). Note that the FC Routing service is disabled by the factory. Recommended Action No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 386
command with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled by the factory. Recommended Action No action is required. FCR-1070 Message The FC Routing configuration is set to default. Message Type LOG Severity INFO Probable Cause Indicates that the FC Routing - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 387
LSAN Zones. Message Type LOG Severity ERROR Probable Cause Indicates that the remote control processor (CP) has older firmware, which supports a lower number of logical storage area network (LSAN) zones. This is causing the loss of high availability (HA) sync. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 388
. Message Type LOG Severity ERROR Probable Cause Indicates that the zone name configuration size created in the connected fabric exceeds the maximum supported by the FC Router. This size is equal to the total number of characters used by all the zone names in the edge fabric zoning - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 389
FCR-1078 5 FCR-1078 Message LSAN name is too long. It is dropped. Message Type LOG Severity WARNING Probable Cause Indicates the length of the logical storage area network (LSAN) name exceeds the limit of 64 characters. Recommended Action Change the name and reactivate the zone - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 390
5 FCR-1081 FCR-1081 Message The pause message is rejected by the domain . Message Type LOG Severity WARNING Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented the protocol from completing. Any - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 391
may have been the result of this issue. Recommended Action No action is required. FCR-1085 Message HA sync lost as remote CP does not support FCR based matrix. Message Type LOG Severity ERROR Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 392
5 FCR-1087 FCR-1087 Message ExPort connects to fabric with capability to use XISL domain . Message Type LOG Severity ERROR Probable Cause Indicates that the EX_Port connects to the logical fabric containing a domain that has the capability to use extended ISL ( - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 393
Probable Cause Indicates that the FCR ELS trap entries are exhausted. Recommended Action Execute the supportSave command and contact your switch service provider. FCR-1093 Message Slave EX-Port interopmode conflicts with trunk master . Disabling the port. Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 394
Brocade Native mode fabrics. FCR-1095 Message The EX-Port is configured in 'McData/Open' Mode which is no longer supported phase failed. Recommended Action Usually this problem is transient. The authentication may fail service provider. 372 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 395
that failed to get memory. Recommended Action Usually this problem is transient. The authentication may fail. Reinitialize authentication automatic FTP transfers; then run the supportSave command and contact your switch service provider. FCR-1098 Message Invalid message code for - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 396
Disabled> RdBlkId . Message Type LOG Severity INFO Probable Cause Indicates the configuration was changed manually. Recommended Action No action is required. 374 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 397
in an error case. Recommended Action If there was a job failure associated with this event, contact your vendor's customer support. FICN-1008 Message DevDiskEgr:FICON Purge Path received Path=0x. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 398
to read the sense data. Recommended Action If there was a job failure associated with this event, contact your vendor's customer support for assistance. FICN-1010 Message DevDiskEgr:Device level exception flag found for Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 399
attached storage device (DASD) Control Unit. Recommended Action If there was a job or I/O failure associated with this event, contact your vendor's customer support for assistance. FICN-1013 Message DevDiskIng:Status=0x received in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 400
(LRC) values. This indicates data corruption between the emulation processing components. Recommended Action Contact your vendor's customer support for assistance. FICN-1016 Message DevIng:Received Logical Path Removed response:Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 401
Control Unit sent a frame that cannot be associated with a FICON Control Unit number (CUADDR). Recommended Action Contact your vendor's customer support for assistance. FICN-1019 Message DevTapeEgr:AS Link Level Reject (LRJ) from Chan on Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 402
in emulation. Recommended Action If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance. FICN-1022 Message DevTapeEgr:FICON Selective Reset:Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 403
. Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1025 Message DevTapeIng:Auto Sense Data received on Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 404
Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1028 Message HostDiskIng:FICON Cancel received Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 405
. Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1031 Message HostDiskIng:FICON System Reset received on Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 406
the channel side noted corruption from the Control Unit- or device-side processing. Recommended Action Contact your vendor's customer support for assistance. FICN-1035 Message HostIng:FICON System Reset received on Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 407
Severity ERROR Probable Cause Indicates a locally connected FICON channel sent a frame that could not be associated with a FICON device. Recommended Action Contact your vendor's customer support for assistance. Fabric OS Message Reference 385 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 408
from the channel. Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1041 Message HostTapeEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 409
or network errors can cause a Selective Reset. Recommended Action If this was an unexpected event, contact your vendor's customer support for assistance. FICN-1044 Message HostTapeIng:FICON Selective Reset:Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 410
This is performed during the path recovery. Recommended Action If this was an unexpected event, contact your vendor's customer support for assistance. FICN-1046 Message HostTapeIng:LRJ received on Path=0x lastCmds - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 411
Indicates the operator has canceled a read or write job. Recommended Action This is an unexpected event; contact your vendor's customer support for assistance. FICN-1049 Message ProcessIngTirData:Lost Logical Path for Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 412
extended direct attached storage device (DASD) device. Recommended Action If this was an unexpected event, contact your vendor's customer support for assistance. FICN-1053 Message XRC Withdraw From Session: SessID=, Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 413
devices from the eXtended Remote Copy (XRC) session. Recommended Action If this was an unexpected event, contact your vendor's customer support for assistance. FICN-1056 Message FICON Emulation Error Error Code=, Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 414
frame could not be created and sent to a device. Recommended Action This is an unexpected event; contact your vendor's customer support for assistance. FICN-1058 Message Error return from frame generation processing for a FICON control unit: Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 415
in the removal of an existing fast path hash table entry. Recommended Action This is an unexpected event; contact your vendor's customer support for assistance. FICN-1062 Message Ingress Abort:Oxid=0x:Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 416
been received from a peer FC interface for an active emulation exchange. Recommended Action This is an unexpected event; contact your vendor's customer support for assistance. FICN-1064 Message Ingress Abort:Oxid=0x:Unknown Path on GEPort= VEPort - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 417
for an emulation CH exchange. Recommended Action If there were associated I/O errors at the same time as this event, contact your vendor's customer support for assistance. FICN-1068 Message Ingress Abort:Oxid=0x:Abort for CU=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 418
pipelining and not the unit check. If there are associated I/O error messages with this event, contact your vendor's customer support for assistance. FICN-1071 Message HostTapeIngr:Tape Loaded on Path=0x. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 419
FICN-1072 5 FICN-1072 Message DevTapeEgr:Tape Loaded on Path=0x. Message Type LOG Severity INFO Probable Cause Indicates the tape I/Os are processed from a locally connected Logical Partition (LPAR), which - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 420
5 FICN-1075 Recommended Action No action is required. FICN-1075 Message HostTapeIngr:ReadBlkReport:Path=0x:Emuls=0x:Cmds=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 421
FICN-1077 5 FICN-1077 Message DevTapeEgr:Unloaded:Path=0x:states=0x:cmds=0x: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 422
5 FICN-1079 FICN-1079 Message DevTapeEgr:ReadBlkReport:Path=0x:Emuls=0x:Cmds=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 423
FICON emulated path has logged out from the switch. Recommended Action This may be an unexpected event; contact your vendor's customer support for assistance. FICN-1084 Message fcFicInit: No DRAM2 memory available, FICON emulation is disabled. Message Type LOG Severity ERROR Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 424
FICON FCIP tunnel to the peer switch has been terminated. Recommended Action This is an unexpected event; contact your vendor's customer support for assistance. FICN-1087 Message DevTeraEgr:AS Link Level Reject (LRJ) from Chan on Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 425
in emulation. Recommended Action If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance. FICN-1090 Message DevTeraEgr:FICON Selective Reset:Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 426
for a device. Recommended Action If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance. FICN-1092 Message DevTeraEgr:FICON Purge received Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 427
. Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1095 Message DevTeraIng:Device level exception found for Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 428
logical path to the Logical Partition (LPAR). Recommended Action If this was an unexpected event; contact your vendor's customer support for assistance. FICN-1098 Message HostTeraIng:FICON Cancel received Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 429
This is performed during the path recovery. Recommended Action If this was an unexpected event, contact your vendor's customer support for assistance. FICN-1102 Message HostTeraIng:LRJ received on Path=0x lastCmds - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 430
pipelining and not the unit check. If there are associated I/O error messages with this event, contact your vendor's customer support for assistance. FICN-1104 Message DevTeraEgr:Device Ready on Path=0x. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 431
sequence from the device. Recommended Action If there was a job failure associated with this event, contact your vendor's customer support for assistance. FICN-1107 Message DevPrintEgr:FICON Cancel received Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 432
in emulation. Recommended Action If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance. FICN-1110 Message DevPrintEgr:FICON Selective Reset:Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 433
not have a path established to the Control Unit. Recommended Action This is normally an unexpected event; contact your vendor's customer support for assistance. FICN-1114 Message DevPrintIng:Device level exception found for Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 434
from the device. Recommended Action If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1116 Message HostPrintEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 435
timeout condition and issued a Selective Reset. Recommended Action If this was an unexpected event, contact your vendor's customer support for assistance. FICN-1120 Message HostPrintIng:FICON Purge received:Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 436
or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-2005 Message FICON VEPort Feature Severity INFO Probable Cause Indicates the configuration was changed manually. Recommended Action No action is required. 414 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 437
FC interface for an exchange. Recommended Action If there were associated I/O errors at the same time as this event, contact your vendor's customer support for assistance. FICN-2065 Message Egress Abort:Oxid=0x:Unknown Path on VEPort= from SID=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 438
event; either the maximum number of emulation devices are already in use or there is an internal memory leak. Contact your vendor's customer support for assistance. FICN-2082 Message EmulEls:CSWR_RSCN received on VEPort= Domain=0x Port=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 439
FCIP tunnel to the peer switch has been terminated. Recommended Action This is an unexpected event; contact your vendor's customer support for assistance. FICN-2087 Message FICON connected 3900 printer discovered Path=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 440
is a component of the Fabric OS configuration database and is for support use only. The error variable is an internal error number. Recommended request node ID (RNID) from the management server because of a Fabric OS problem. The domain variable displays the domain ID of the target switch for this - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 441
PID format to core PID using the configure command and re-enable FMS Mode using the ficonCupSet command. Refer to the Fabric OS Administrator's Guide for information on core PID mode. FICU-1005 Message Failed to initialize , rc = . Message Type LOG Severity ERROR Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 442
that memory resources are low. This may be a transient problem. Recommended Action Check the memory usage on the switch using automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FICU-1008 Message FMS mode has been enabled. Port(s): - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 443
FICU-1010 5 FICU-1010 Message FMS mode enable failed due to port(s) with areas 0xFE or 0xFF is(are) connected to device(s). Message Type LOG Severity WARNING Probable Cause Indicates that the FICON Management Server (FMS) mode was not enabled because ports with areas 0xFE or 0xFF are - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 444
FICON port address and port number relationship. For more information, refer to the "FICON and FICON CUP in Virtual Fabrics" section of the FICON Administrator's Guide. 422 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 445
FICU-1019 5 FICU-1019 Message Switch has been set offline by LP(). Message Type AUDIT | LOG Class CFG Severity INFO Probable Cause Indicates that the FICON Management Server (FMS) has disabled the switch. Recommended Action No action is required. FICU-1020 Message Port Addrs ( - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 446
in the switch. Recommended Action No action is required. For more information on the FICON CUP restrictions, refer to the FICON Administrator's Guide. FICU-1024 Message Detected 64 port blade when FMS mode is enabled. Message Type LOG Severity INFO Probable Cause Indicates presence of 64 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 447
FKLB-1001 5 FKLB Messages FKLB-1001 Message exchange overlapped, pid=. Message Type LOG Severity WARNING Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. When the FC kernel driver reuses the exchange, the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 448
>. Message Type LOG | FFDC Severity ERROR Probable Cause Indicates that the link state update (LSU) size exceeds the value the system can support. Recommended Action Reduce the number of switches in the fabric or reduce the number of redundant inter-switch links (ISLs) between two switches - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 449
FLOD-1005 5 FLOD-1005 Message Invalid received domain ID: . Message Type LOG Severity WARNING Probable Cause Indicates that the received link state record (LSR) contained an invalid domain number. Recommended Action No action is required; the LSR is discarded. FLOD-1006 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 450
Action No action is required. This is a temporary kernel error that does not affect your system. If the problem persists, execute the supportSave command and contact your service provider. FSPF-1002 Message Wrong neighbor ID () in Hello message from port , expected ID - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 451
from another manufacturer with a section ID other than 0 is incompatible in a fabric of Brocade switches. Disconnect the incompatible switch. FSPF-1006 Message FSPF Version not supported, input port = . Message Type LOG Severity ERROR Probable Cause Indicates that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 452
5 FSPF-1008 FSPF-1008 Message ICL triangular topology is formed among the domains: (self), , and . Message Type LOG Severity INFO Probable Cause Indicates that the inter-chassis link (ICL) triangular topology is formed. Recommended Action No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 453
FSPF-1012 5 Recommended Action Investigate current ICL configuration to ensure that all recommendations for cabling are satisfied. FSPF-1012 Message All existing ICL topology imbalances have been corrected. Message Type LOG Severity INFO Probable Cause Indicates that the existing inter- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 454
-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic transfers; then execute the supportSave command and contact your switch service provider. FSS-1002 Message Component () sending too - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 455
FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1005 Message FSS read failure. Message Type LOG state synchronization (FSS) device has failed. Recommended Action If the problem persists, execute the supportFtp command (as needed) to set up - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 456
the network configuration and then execute the haSyncStart command to restore the high availability (HA) synchronization. If the problem persists, contact your switch service provider. FSS-1008 Message FSS Error: . Message Type LOG Severity CRITICAL Probable Cause Indicates that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 457
Indicates that a Fabric OS state synchronization (FSS) error may have occurred. Recommended Action Execute the supportSave command and contact your switch service provider. FSS-1011 Message FSS Info: . Message Type LOG Severity INFO Probable Cause Indicates a Fabric OS state - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 458
the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSSM-1004 Message Incompatible software version in HA synchronization. Message Type LOG Severity CRITICAL Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 459
FSSM-1004 5 Recommended Action For a dual CP system, execute the firmwareDownload command to load compatible firmware on the standby CP. Fabric OS Message Reference 437 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 460
a switch are functioning normally. Verify that the location temperature is within the operational range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch. FW-1003 Message , is above high boundary(High=, Low= - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 461
is . Message Type LOG Severity INFO Probable Cause Indicates that the speed of the fan has changed. Fan problems typically contribute to temperature problems. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 462
of the fan has changed from a value outside of the acceptable range to a value within the acceptable range. Fan problems typically contribute to temperature problems. Recommended Action No action is required. Consistently abnormal fan speeds generally indicate that the fan is failing. If this - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 463
power. Recommended Action Verify that you have installed the power supply correctly and that it is correctly seated in the chassis. If the problem persists, replace the faulty power supply. FW-1011 Message , is above high boundary(High=, Low=). Current value is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 464
5 FW-1033 FW-1033 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has changed. Frequent fluctuations in SFP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 465
FW-1036 5 FW-1036 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has changed from a value outside - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 466
5 FW-1039 FW-1039 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has risen above the high boundary. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 467
FW-1042 5 FW-1042 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below the low boundary. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 468
5 FW-1045 FW-1045 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. If the supplied voltage of the SFP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 469
FW-1048 5 FW-1048 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value outside - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 470
5 FW-1051 FW-1051 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high boundary. High - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 471
FW-1054 5 FW-1054 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the value of the small form-factor pluggable (SFP) Power on Hours has risen above the high boundary. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 472
5 FW-1115 FW-1115 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of times E_Ports have gone down has risen above the high boundary. E_Ports go down each time - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 473
small form-factor pluggables (SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. FW-1118 Message , is below low boundary(High=, Low=). Current value is . Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 474
5 FW-1120 FW-1120 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of fabric reconfigurations has changed from a value outside of the acceptable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 475
FW-1123 5 Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1123 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 476
5 FW-1126 • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 477
FW-1128 5 FW-1128 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of segmentations has changed from a value outside of the acceptable range to a - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 478
5 FW-1131 Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1131 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 479
FW-1134 5 FW-1134 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur when a port or device - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 480
5 FW-1137 FW-1137 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has changed. SFP state changes occur when the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 481
a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. A low number of link loss errors means that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 482
a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended Action Check for concurrent loss of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 483
connection. Verify that the cable and SFPs are not faulty. If you continue to experience synchronization loss errors, troubleshoot your host bus adapter (HBA) and contact your switch service provider. FW-1165 Message , is below low boundary(High=, Low= - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 484
Indicates that the number of signal losses that the port experiences has fallen below the low boundary. Loss of signal generally indicates a physical problem. A low number of signal loss errors means that the switch is functioning normally. Recommended Action No action is required. Respond to this - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 485
has changed from a value outside of the acceptable range to a value within the acceptable range. Frequent loss of signal generally indicates a physical problem. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 486
experiences has risen above the high boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended Action Check both ends of your connection. Verify that your cable and small form-factor pluggables (SFPs) are not faulty - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 487
Severity INFO Probable Cause Indicates that the number of invalid words that the port experiences has changed. Invalid words usually indicate a hardware problem with a small form-factor pluggable (SFP) or cable. Recommended Action Verify that both ends of the connections, the SFP, and the cable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 488
experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Invalid words usually indicate a hardware problem with a small form-factor pluggable (SFP) or cable. Recommended Action No action is required. Respond to this message as is appropriate to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 489
FW-1182 5 FW-1182 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 490
5 FW-1185 FW-1185 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the percentage of incoming traffic that the port experiences has fallen below the low - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 491
FW-1188 5 FW-1188 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the percentage of outgoing traffic that the port experiences has changed. Recommended Action No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 492
5 FW-1191 FW-1191 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the percentage of outgoing traffic that the port experiences has changed from a - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 493
FW-1194 5 FW-1194 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of state changes that the port experiences has risen above the high boundary. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 494
has increased above the high boundary level. Link resets occur due to link timeout errors that indicate no frame activity. Both physical and hardware problems can cause link resets to increase. Recommended Action Check both ends of your cable connection. Verify if the cable and small form-factor - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 495
FW-1200 5 FW-1200 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of C3 transmit timeout frames has changed. Recommended Action Check the target - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 496
5 FW-1203 FW-1203 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of C3 transmit timeout frames is between the high and low thresholds. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 497
and aging equipment. You should set your high boundaries to five- or six-digit figures, because only large numbers of messages indicate a problem in this area. Recommended Action Verify that your optical components are clean and function properly. Replace deteriorating cables or small form-factor - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 498
Action You should configure a five- or six-figure high boundary for this area. Only five-figure (or higher) values for CRC errors indicate problems. Check for a faulty cable or deteriorated small form-factor pluggable (SFP). Replace the cable or the SFP if necessary. Clean the connectors. Check - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 499
fluctuations, and aging equipment. You should set your high boundaries to five- or six-digit figures, because only large numbers of messages indicate a problem in this area. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 500
5 FW-1242 Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of CRC errors means that the fabric is functioning normally. The CRC error area of the end-to-end performance monitor class helps you - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 501
FW-1244 5 FW-1244 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of end-to-end word frames that the switch receives has changed. Receive performance messages - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 502
5 FW-1247 FW-1247 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of end-to-end word frames that the switch receives has changed from a value - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 503
FW-1250 5 FW-1250 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of end-to-end word frames that the switch transmits has risen above the high boundary. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 504
5 FW-1273 FW-1273 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of frame types or commands that the port receives has fallen below the low boundary. The port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 505
FW-1296 5 FW-1296 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of Telnet violations has changed. Telnet violations indicate that a Telnet connection request has - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 506
5 FW-1299 FW-1299 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of Telnet violations has changed from a value outside of the acceptable range to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 507
FW-1302 5 FW-1302 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of Hypertext Transfer Protocol (HTTP) violations has risen above the high boundary. HTTP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 508
5 FW-1305 Recommended Action Execute the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. FW-1305 Message , is below low boundary(High - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 509
FW-1307 5 FW-1307 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of application programming interface (API) violations has changed from a value - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 510
5 FW-1310 FW-1310 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of read SNMP (RSNMP) violations has risen above the high boundary. RSNMP violations - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 511
FW-1313 5 FW-1313 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of write SNMP (WSNMP) violations has fallen below the low boundary. WSNMP violations indicate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 512
=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of SCSI Enclosure Services (SES) violations has fallen below the low boundary. SES violations indicate that a Small Computer System Interface (SCSI) Enclosure - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 513
>, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of SCSI Enclosure Services (SES) violations has changed from a value outside of the acceptable range to a value within the acceptable range. SES violations indicate that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 514
5 FW-1322 FW-1322 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of Management Server (MS) violations has risen above the high boundary. MS violations - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 515
FW-1325 5 FW-1325 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of serial violations has fallen below the low boundary. Serial violations indicate that an - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 516
5 FW-1328 FW-1328 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of front panel violations has changed. Front panel violations indicate that an unauthorized front - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 517
FW-1331 5 FW-1331 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of front panel violations has changed from a value outside of the acceptable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 518
5 FW-1334 FW-1334 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of Switch Connection Control (SCC) policy violations has risen above the high boundary. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 519
FW-1337 5 Recommended Action Execute the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. FW-1337 Message , is below low - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 520
5 FW-1339 FW-1339 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of Device Connection Control (DCC) violations has changed from a value outside of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 521
FW-1342 5 FW-1342 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of login violations has risen above the high boundary. Login violations indicate that a - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 522
5 FW-1345 FW-1345 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of invalid timestamps has fallen below the low boundary. Invalid timestamp violations indicate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 523
FW-1347 5 FW-1347 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of invalid timestamps has changed from a value outside of the acceptable range - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 524
5 FW-1349 FW-1349 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of invalid signatures has fallen below the low boundary. Invalid signature violations indicate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 525
FW-1351 5 FW-1351 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of invalid signatures has changed from a value outside of the acceptable range - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 526
5 FW-1353 FW-1353 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of invalid certificates has fallen below the low boundary. This violation indicates that a - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 527
the number of authentication failures has changed. Authentication failures can occur for many reasons. The switch on the other side may not support the protocol, have an invalid certificate, not be signed properly, or send unexpected packets. The port where authentication fails is segmented. This - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 528
range to a value within the acceptable range. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly, or send unexpected packets. The port where authentication fails is segmented. This - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 529
FW-1361 5 Recommended Action Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. FW-1361 Message , is below low boundary(High=, Low=). Current value is . Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 530
=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of time service (TS) out-of-sync violations has fallen below the low boundary. Recommended Action No action is required. FW-1366 Message , is above - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 531
High value>, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 532
5 FW-1370 Recommended Action No action is required. FW-1370 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the number of no-FCS violations has risen above the high - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 533
FW-1372 5 FW-1372 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of incompatible security database violations has changed. This violation indicates the number of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 534
5 FW-1375 Recommended Action Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. FW-1375 Message , is between high and low boundaries(High=, Low=). Current value is . - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 535
FW-1377 5 FW-1377 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of illegal commands has fallen below the low boundary. This counter tracks how many times - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 536
5 FW-1379 FW-1379 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of illegal commands has changed from a value outside of the acceptable range to a - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 537
FW-1402 5 FW-1402 Message , is above high boundary(High=, Low=). Current value is . Message Type AUDIT | LOG Class FW Severity WARNING Probable Cause Indicates that the flash memory usage percentage has risen above the high boundary. Flash memory - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 538
5 FW-1405 FW-1405 Message ,is above high boundary(High=, Low=). Current value is . Message Type AUDIT | LOG Class FW Severity INFO Probable Cause Indicates that the memory usage is below the low memory threshold. Recommended Action No action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 539
FW-1408 5 FW-1408 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the memory usage is between the low and high or middle memory thresholds. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 540
5 FW-1426 FW-1426 Message Switch status change contributing factor Power supply: bad, absent. Message Type LOG Severity WARNING Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of faulty or missing power - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 541
FW-1429 5 FW-1429 Message Switch status change contributing factor: Power supplies are not redundant. Message Type LOG Severity WARNING Probable Cause Indicates that the switch is not in a healthy state. This occurred because the power supplies are not in the correct slots for redundancy. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 542
the heartbeat was up on a power cycle, and the CPs came up non-redundant, then you should reboot the CPs again to clear the problem. FW-1434 Message Switch status change contributing factor Blade: blade failures (). Message Type LOG Severity WARNING Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 543
FW-1435 5 FW-1435 Message Switch status change contributing factor Flash: usage out of range. Message Type LOG Severity WARNING Probable Cause Indicates that the switch is not in a healthy state. This occurred because the flash memory usage is out of range. The policy was set using the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 544
5 FW-1438 FW-1438 Message Switch status change contributing factor Missing SFPs: missing SFPs out of SFPs:config( percent,). (Port(s) ). Message Type LOG Severity WARNING Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 545
FW-1441 5 FW-1441 Message state has changed to . Message Type LOG Severity INFO Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to inserted. This means that a FRU is inserted but not powered on. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 546
Policy values pertaining to the number of power supplies. So those values will not be automatically changed. With no AP blades, the default value is 3 (out of service), indicating switch status is down or 0 indicating no checking for switch status marginal. When an AP blade is or has been present - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 547
FW-1447 5 FW-1447 Message Switch status change contributing factor Core Blade: Core blade failures (). Message Type LOG Severity WARNING Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of core blade failures is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 548
because the link on this port had multiple link failures that exceeded the Fabric Watch threshold on the port. Both physical and hardware problems can cause link failures. Link failures frequently occur due to a loss of synchronization. Link failures also occur due to hardware failures, a defective - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 549
loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended Action No action is required. Respond - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 550
below the upper threshold boundary to a value within the acceptable range. Loss of signal generally indicates a physical problem. Recommended Action Frequent loss of signal generally indicates a physical problem. Check both ends of your cable connection. Verify that the cable and small form-factor - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 551
the port experiences has changed and crossed the lower threshold boundary to a value within the acceptable range. Invalid words usually indicate a hardware problem with a small form-factor pluggable (SFP) or cable. Recommended Action No action is required. Respond to this message as is appropriate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 552
experiences has changed and dropped the below upper threshold boundary to a value within the acceptable range. Invalid words usually indicate a hardware problem with a small form-factor pluggable (SFP) or cable. Recommended Action No action is required. Respond to this message as is appropriate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 553
FW-1523 5 FW-1523 Message , has crossed lower threshold boundary to in between(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the percentage of incoming traffic that the port experiences - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 554
5 FW-1526 FW-1526 Message , has dropped below upper threshold boundary to in between(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the percentage of outgoing traffic that the port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 555
to a value within the acceptable range. Link resets occur due to link timeout errors that indicate no frame activity at all. Both physical and hardware problems can cause link resets to increase. Recommended Action Respond to this message as is appropriate to the particular policy of the end-user - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 556
5 FW-1532 FW-1532 Message , has dropped below upper threshold boundary to in between(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of C3 transmit timeout frames has dropped below - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 557
is configured for link loss and synchronization loss in previous versions, but upgrading to a new version resets the bit because Port Fencing is not supported. Recommended Action No action is required. You are informed that the Port Fencing bit is reset. FW-2000 Message FW Monitoring is disabled - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 558
5 FW-3010 FW-3010 Message value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the circuit utilization has changed. Recommended Action Respond to this message as is appropriate - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 559
FW-3013 5 FW-3013 Message is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the circuit utilization is between the high and low boundary thresholds. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 560
5 FW-3016 FW-3016 Message is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates the packet loss that the circuit experiences is above the high boundary threshold. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 561
FW-3019 5 FW-3019 Message is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates the number of state changes that the circuit experiences is below the low boundary level. The - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 562
for is changed to Minute as Seconds is not supported. Message Type LOG Severity INFO Probable Cause Indicates that the timebase for the class is changed implicitly to minutes because a seconds timebase is not supported. Recommended Action No action is required. 540 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 563
healthy, non-disruptive failover is not possible. Recommended Action Restart the standby CP blade by ejecting the card and reseating it. If the problem persists, replace the standby CP. HAM-1002 Message Standby CP is healthy. Message Type LOG Severity INFO Probable Cause Indicates that all - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 564
5 HAM-1005 • Fastboot • Giveup Master:SYSM • CP Faulty:SYSM • FirmwareDownload • ConfigDownload:MS • ChangeWWN:EM • Reboot:WebTool • Fastboot:WebTool • Software Fault:Software Watchdog • Software Fault:Kernel Panic • Software Fault:ASSERT • Reboot:SNMP • Fastboot:SNMP • Reboot • Chassis Config • - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 565
recovery has failed. Recommended Action If auto-reboot is enabled, the switch will automatically restart. Otherwise, execute the reboot command to manually restart the switch. HAM-1008 Message Rebooting the system for recovery - auto-reboot is enabled. Message Type FFDC | LOG Severity CRITICAL - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 566
CRITICAL Probable Cause Indicates that out of memory (OOM) condition has been detected when the switch was not ready for warm recovery. Recommended Action Manually trigger the switch restart for cold recovery, if needed; or wait until switch is ready for warm recovery and execute the haReboot or - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 567
Cause Indicates that the software watchdog has detected termination of a restartable daemon, but could not restart the daemon. Recommended Action Manually initiate a restart or failover, if needed. HAM-1014 Message . Message Type LOG Severity CRITICAL Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 568
. Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. HAMK-1002 Message Heartbeat down. Message Type LOG Severity INFO Probable Cause Indicates that the active control processor (CP) blade - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 569
HAMK-1004 5 HAMK-1004 Message Resetting standby CP (double reset may occur). Message Type LOG Severity INFO Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. Typically, this message is displayed when the standby CP has been restarted. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 570
supply status. Try to reseat the faulty fan field-replaceable units (FRUs) and power supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power supply FRU as necessary. 548 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 571
status. Try to reseat the faulty fan field-replaceable units (FRUs) and power supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power supply FRU as necessary. HIL-1105 Message Switch error, () above threshold - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 572
sure that the area is well-ventilated and that the room temperature is within the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the fan - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 573
sure that the area is well-ventilated and that the room temperature is within the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the fan - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 574
speed (in RPM) has fallen below the minimum threshold. This problem can quickly cause the switch to overheat. This message is is within the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Use the fanShow command to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 575
a fan field-replaceable unit (FRU) has failed or has been removed. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Action Replace the affected fan FRU immediately. HIL-1302 Message blowers failed or missing. Replace - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 576
5 HIL-1304 HIL-1304 Message Two fans failed. Replace failed fan FRUs immediately. Message Type LOG Severity ERROR Probable Cause Indicates that multiple fan field-replaceable units (FRUs) have failed. This message is often preceded by a low fan speed message. Recommended Action Replace the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 577
HIL-1307 5 HIL-1307 Message Four or five fans failed. Replace failed fan FRUs immediately. Message Type LOG Severity ERROR Probable Cause Indicates that multiple fan field-replaceable units (FRUs) have failed. This message is often preceded by a low fan speed message. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 578
5 HIL-1311 Recommended Action Because the fans are not field-replaceable, replace the switch if the temperature is high. HIL-1311 Message No fans are faulty. Message Type LOG Severity INFO Probable Cause Indicates recovery from an earlier condition of one or more fans having failed. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 579
. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Fabric OS Message Reference 557 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 580
that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the blade. HIL-1503 Message Slot , unit shutting - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 581
the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. HIL-1507 Message to the switch, the system shuts down automatically. To help prevent future problems, make sure that all the fans are working properly. Make sure that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 582
operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. HIL-1509 Message to the switch, the system shuts down automatically. To help prevent future problems, make sure that all the fans are working properly. Make sure that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 583
the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. HIL-1601 cycling the switch. HIL-1602 Message Multiple temperature sensors failed. Service immediately. Message Type FFDC | LOG Severity CRITICAL Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 584
count> fans out of service. System is shutting down system shuts down automatically. To help prevent future problems, make sure that all the fans are working the unit is faulty. This message is applicable only to the Brocade 5100. Recommended Action Ensure the power cord is connected to the unit - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 585
and fan assemblies must move in the same direction or the system will shut down in two minutes. This message is applicable only to the Brocade 6510. Recommended Action Use the chassisShow command to check the airflow directions of the power supply and fan assemblies. Ensure that the airflows run - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 586
5 HIL-1650 HIL-1650 Message Unable to detect both WWN cards in chassis. Access to WWN halted. Message Type LOG Severity ERROR Probable Cause Indicates that one or both of the World Wide Name (WWN) cards is missing. Both WWN cards must be present for normal operation. Recommended Action Make - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 587
ERROR Probable Cause Indicates that the hello (HLO) message was incompatible with the value specified in the fabric shortest path first (FSPF) protocol. The Brocade switch will not accept FSPF frames from the remote switch. In Fabric OS, the HLO timeout value is not configurable, so this error can - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 588
an invalid HLO because either the domain or port number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended Action The HLO message of the remote switch must be compatible with the value specified - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 589
FFDC | LOG Severity CRITICAL Probable Cause Indicates that there was a problem reading an essential file containing configuration information from the nonvolatile storage device. the supportSave command and contact your switch service provider. Fabric OS Message Reference 567 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 590
Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. HSL-1001 Message Failed to acquire system MAC address pool. Message Type LOG Severity CRITICAL Probable Cause Indicates failure to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 591
interface using the shutdown command and insert an SFP transceiver that is supported on the interface. After the SFP transceiver is inserted, re- a failure to initialize the Fabric OS State Synchronization (FSS) service. This error is caused by other system errors. Recommended Action Execute - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 592
shutdown command and re-insert the SFP transceiver. After the SFP transceiver is inserted, re-enable the interface using the no shutdown command. If the problem persists, contact your switch service provider. 570 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 593
) format was changed. Recommended Action No action is required. For more information on PID format, refer to the Fabric OS Administrator's Guide. HTTP-1002 Message Zoning transaction initiated by User: , Role: completed successfully. Message Type AUDIT | LOG Class ZONE - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 594
5 IBD-1000 IBD Messages IBD-1000 Message Slot Port GE: Maximum attempts to restart failed. Disabling port. Message Type LOG Severity ERROR Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 595
address> DHCP . Message Type LOG Severity INFO Probable Cause Indicates that the gateway IP address has been changed manually or it was reconfigured automatically by the Dynamic Host Configuration Protocol (DHCP) server. Recommended Action No action is required. IPAD-1002 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 596
5 IPAD-1003 IPAD-1003 Message DNS parameters saved successfully. Message Type LOG Severity INFO Probable Cause Indicates that the Domain Name System (DNS) parameters are saved successfully. Recommended Action No action is required. IPAD-1004 Message DNS parameters removed successfully. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 597
Probable Cause Indicates that memory resources are low. This may be a transient problem. Recommended Action Check the memory usage on the switch using the memShow command then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 575 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 598
5 IPS-1004 IPS-1004 Message Port Config Mode Mismatch slot () port(ge): current mode is (). Message Type LOG Severity WARNING Probable Cause Indicates that configured port mode is different from the intended use. Recommended Action Change the port configuration (by - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 599
Type LOG Severity WARNING Probable Cause Indicates that the tunnel configuration failed because the FX8-24 blade is not at the correct revision to support IPSec enabled tunnels on VEs 22-31. Recommended Action Contact your switch vendor to acquire the correct hardware revision blade. Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 600
with external iSNS server is disabled. Message Type LOG Severity INFO Probable Cause Indicates that the IP address of the Internet Storage Name Service (iSNS) server is zero. Therefore, peering is disabled. Recommended Action If you wish to enable the iSNS server, use the isnscCfg command to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 601
Message Type LOG Severity INFO Probable Cause Indicates that a user has requested to re-register with the specified external Internet Storage Name Service (iSNS) server. Recommended Action No action is required. ISNS-1006 Message Start re-register with external iSNS server - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 602
INFO Probable Cause Indicates that peering with the external Internet Storage Name Service (iSNS) server was already started with the same configuration. Recommended Refer to the appropriate hardware reference manual for valid slot and port ranges. 580 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 603
is . Message Type LOG Severity INFO Probable Cause Indicates the current state of the Internet Storage Name Service (iSNS) client is enabled or disabled. Recommended Action No action is required. Use the fosConfig command to display, enable, or disable the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 604
if not, change the switch key vault settings or resolve the operational problem at the key vault. KAC-1006 Message Switch to Key Vault trustee link Refer to the Fabric OS Encryption Administrator's Guide for instructions to establish a trusted link. 582 Fabric OS Message Reference 53-1002749- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 605
is operational; if not, change the switch key vault settings or resolve the operational problem at the key vault. KAC-1008 Message Putting of TEP failed. Check if there the primary and backup key vaults using instructions provided by the key vault provider. Fabric OS Message Reference 583 53- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 606
5 KAC-1010 KAC-1010 Message Archival for KeyID failed to . Error code=, string=. Message Type LOG Severity WARNING Probable Cause Indicates that archiving of Data Encryption Key (DEK) to the key vault failed. Recommended Action No action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 607
KAC-1013 5 KAC-1013 Message Archival of the Actual DEK to the KV failed. Actual Key: . Error code=, string=. Message Type LOG Severity WARNING Probable Cause Indicates that archiving of actual Data Encryption Key (DEK) to the key - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 608
resolve the operational problem at the key vault. KAC-1017 Message Error: KV parameter [] configured on BES is not supported by the Key the configured key vault parameters on the Brocade Encryption Switch (BES) and the functionality supported by the key vault. Recommended Action De - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 609
An abort signal is sent. Recommended Action Copy the warning message along with any core file information and contact your switch service provider. KSWD-1002 Message Detected termination of process :. Message Type FFDC | LOG Severity WARNING - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 610
size has exceeded the dump file size. Recommended Action Execute the supportSave command and reload the switch. If the problem persists, contact your switch service provider. KTRC-1002 Message Concurrent trace dumping. Message Type LOG Severity INFO Probable Cause Indicates that the initial - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 611
(ATA) dump device has exceeded. Recommended Action Execute the supportSave command and reload the switch. If the problem persists, contact your switch service provider. KTRC-1005 Message Trace initialization failed. . . Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 612
Error: Message queue create failed. Message Type LOG Severity ERROR Probable Cause Indicates that the Layer 2 system (L2SYS) encountered system service manager (SSM) message queue errors. Recommended Action Reboot or power cycle the switch. 590 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 613
L2SS-1004 5 L2SS-1004 Message FDB error: Error in creating AVL tree. Message Type LOG Severity ERROR Probable Cause Indicates that the Layer 2 system (L2SYS) has encountered an error while initializing the AVL tree. Recommended Action Reboot or power cycle the switch. L2SS-1005 Message MAC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 614
5 L2SS-1007 L2SS-1007 Message MAC-address-table on slot chip is less than 90 percent full. Message Type LOG Severity INFO Probable Cause Indicates that the media access control (MAC) address table on the specified chip is less than 90 percent full. Recommended Action No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 615
L3SS-1004 5 L3SS Messages L3SS-1004 Message , : HW/Driver Error (possibly the CAM is full): , rc=. Message Type LOG Severity ERROR Probable Cause Indicates an error in the hardware or the driver of the Layer 3 subsystem (L3SS). L3SS may - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 616
5 LACP-1001 LACP Messages LACP-1001 Message Error opening socket (). Message Type LOG Severity ERROR Probable Cause Indicates that initialization of the specified module within the Link Aggregation Control Protocol (LACP) daemon has failed. Recommended Action Download a new - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 617
LANCE-1000 5 LANCE Messages LANCE-1000 Message Slot Port GE: Maximum attempts to restart failed. Disabling port. Message Type LOG Severity ERROR Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 618
Cause Indicates that the Logical Fabric Manager service is disabled. Note that the Logical Fabric Manager service is enabled by the factory setting and is set to default. This will remove all prior Logical Fabric Manager configurations. This operation is not supported currently. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 619
sync with remote control processor (CP). Recommended Action Collect the supportsave information using the supportsave command and contact the Brocade technical support. LFM-1005 Message Logical port disabled with reason () Message Type LOG Severity WARNING - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 620
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. LOG-1002 Message A log message was dropped. Message Type FFDC | LOG Severity WARNING Probable Cause Indicates that a message was not - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 621
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. LOG-1005 Message Log message has been disabled. Message Type AUDIT | LOG Class RAS Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 622
5 LOG-1006 LOG-1006 Message Log message has been enabled. Message Type AUDIT | LOG Class RAS Severity INFO Probable Cause Indicates that the specified message has been enabled for logging. Recommended Action No action is required. LOG-1007 Message Log - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 623
LOG-1009 5 LOG-1009 Message Internal Log message has been enabled for syslog logging. Message Type LOG Severity INFO Probable Cause Indicates that the specified internal message has been enabled for syslog logging. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 624
ID is the same as the valid domain ID, with a range from 1 through 239. The switch will discard the record because it is not supported. Recommended Action No action is required. LSDB-1002 Message Local Link State Record reached max incarnation. Message Type LOG Severity INFO Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 625
LSDB-1004 5 Recommended Action Run the switchDisable and switchEnable commands. A new local LSR is generated during the switch enable. LSDB-1004 Message No Link State Record for domain . Message Type LOG Severity WARNING Probable Cause Indicates that there is no link state - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 626
5 MCAST_SS-1001 MCAST_SS Messages MCAST_SS-1001 Message Socket Error: () for socket the error code . Message Type LOG Severity ERROR Probable Cause Indicates that an error has occurred in the Linux socket. Recommended Action Restart the multicast subsystem - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 627
Message Type LOG Severity ERROR Probable Cause Indicates that the multicast subsystem (MCAST_SS) has encountered an error during a network service module (NSM) event. Recommended Action Restart the MCAST_SS daemon. MCAST_SS-1005 Message Message error: Invalid message type expecting - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 628
5 MCAST_SS-1007 MCAST_SS-1007 Message Initialization error: (). Message Type LOG Severity ERROR Probable Cause Indicates that the multicast subsystem (MCAST_SS) has encountered an error during initialization. Recommended Action Restart the MCAST_SS daemon. MCAST_SS-1008 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 629
MCAST_SS-1010 5 MCAST_SS-1010 Message Message Queue error: (). Message Type LOG Severity ERROR Probable Cause Indicates that the multicast subsystem (MCAST_SS) has encountered the message queue errors. Recommended Action Restart the MCAST_SS daemon. MCAST_SS-1011 Message IDB - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 630
5 MCAST_SS-1014 Recommended Action Restart the MCAST_SS daemon. MCAST_SS-1014 Message Snooping DB error: () MAC Not found - VLAN MAC-addr . Message Type LOG Severity ERROR Probable Cause Indicates that the media access control (MAC) address lookup for the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 631
MCAST_SS-1017 5 MCAST_SS-1017 Message Learning error: () Invalid number for ifindex . Message Type LOG Severity ERROR Probable Cause Indicates that the multicast subsystem (MCAST_SS) has encountered an error while learning the media access control (MAC) addresses. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 632
5 MCAST_SS-1020 MCAST_SS-1020 Message List Error: () VLAN MAC group . Message Type LOG Severity ERROR Probable Cause Indicates that the multicast subsystem (MCAST_SS) has encountered an error during the List operation. Recommended Action Restart - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 633
) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. MFIC-1002 Message Chassis FRU header not programmed for switch NID, using defaults (applies only to FICON environments). Message Type LOG Severity INFO Probable Cause Indicates that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 634
5 MFIC-1003 Recommended Action IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for information purposes only, and no action is required. IDID mode can - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 635
or tampering. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 613 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 636
5 MPTH-1001 MPTH Messages MPTH-1001 Message Null parent, lsId = . Message Type LOG | FFDC Severity ERROR Probable Cause Indicates that a null parent was reported. The minimum cost path (MPATH) uses a tree structure in which the parent is used to connect to the root of the tree. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 637
MQ-1004 5 MQ Messages MQ-1004 Message mqRead, queue = , queue ID = , type = . Message Type LOG Severity ERROR Probable Cause Indicates an unexpected message has been received in the specified message queue. The queue name value is always fspf_q. The queue - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 638
5 MQ-1006 MQ-1006 Message queue : msg too long (:). Message Type LOG Severity WARNING Probable Cause Indicates the incoming message size is larger than the message queue size. Recommended Action No action is required. 616 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 639
. • GCAP Rejected (reason =BUSY) by: Execute the firmwareDownload command to upgrade the firmware level on the switch to a level that supports reliable commit service (RCS). RCS is supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later. • Reject EXGPLDB from: Wait a few minutes and try the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 640
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. MS-1004 Message MS detected ONLY 1 Domain(d=). Message Type LOG Severity INFO Probable Cause Indicates that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 641
transitory. The action can be one of the following: • while writing to ms_els_q: MS is unable to write a message to the MS Extended Link Service Queue. • while inserting timer to timer list: MS is unable to add a timer to a resource. Recommended Action If the error persists, check the available - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 642
Action Persistent RLIR incidents are likely the result of SAN hardware problems such as bad cables or small form-factor pluggable (SFP) the supportSave command and contact your switch service provider. MS-1022 Message Management Server Platform Service . Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 643
. Message Type LOG Severity INFO Probable Cause Indicates that the Management Server (MS) topology discovery service is being enabled or disabled. Recommended Action No action is required. MS-1024 Message Management Server Access Control List is Updated. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 644
has disabled the specified E_Port connected to the specified domain because an implicit enable operation of the MS platform service has been blocked. Recommended Action Enable MS platform service on the switch and re-enable the port to join the fabric. MS-1027 Message Fabric Name - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 645
MS-1029 5 MS-1029 Message Duplicate Fabric Name - matching with FID . Message Type AUDIT | LOG Class FABRIC Severity ERROR Probable Cause Indicates that the configured fabric name is already used for another partition. Recommended Action Select a different fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 646
a connection, transfer, or receiving error in the socket. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists or if this is a non-bladed switch, download a new firmware version using the firmwareDownload command. 624 Fabric OS Message Reference - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 647
MSTP-2001 5 MSTP-2001 Message . Message Type LOG Severity INFO Probable Cause Indicates that the multiple spanning tree protocol (MSTP) bridge mode has changed. Recommended Action No action is required. MSTP-2002 Message . My Bridge ID: Old - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 648
5 MSTP-2004 MSTP-2004 Message MSTP instance is deleted. Message Type LOG Severity INFO Probable Cause Indicates that the specified multiple spanning tree protocol (MSTP) instance has been deleted. Recommended Action No action is required. MSTP-2005 Message VLAN is < - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 649
- Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Recommended Action Run the nbrStateShow command to check the neighbor state of the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 650
Database Acknowledge Wait • 4 - Database Wait • 5 - Full Recommended Action No action is required. The Fabric OS automatically recovers from this problem. NBFS-1004 Message Wrong input: to neighbor FSM, state , port . Message Type LOG Severity INFO - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 651
is larger than the max frame size the remote switch can support. Message Type LOG Severity WARNING Probable Cause Indicates that the response .2 or later, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You can also reduce the number of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 652
oversized portion will be truncated. Recommended Action Reduce the zone size to 1024 or smaller, or upgrade the software of the remote switch to support 2048 zones. NS-1006 Message Duplicate WWN was detected with PID 0x and 0x. Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 653
PID>. Message Type LOG Severity WARNING Probable Cause Indicates that a device has logged in with node World Wide Node Name (WWNN) as zero. Brocade Network Advisor (BNA) will not show the port connectivity. Recommended Action Check the device that logged in. The device could be faulty. Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 654
Cause Indicates that class-specific control (CS_CTL) mode has been enabled on the specified port that has devices as members of a quality of service (QoS) zone. Recommended Action Remove the CS_CTL configured devices from the QoS zone. NS-1011 Message NS has detected a failover flag disabled - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 655
NSM-1001 5 NSM Messages NSM-1001 Message Interface is online. Message Type LOG Severity INFO Probable Cause Indicates that the specified interface has come online after the protocol dependencies are resolved. Recommended Action No action is required. NSM-1002 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 656
5 NSM-1003 NSM-1003 Message Interface is link down. Message Type LOG Severity INFO Probable Cause Indicates that the specified interface has gone offline because the link is down. Recommended Action Check whether the connectivity between the peer ports is proper, and the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 657
Recommended Action No action is required. NSM-1007 Message Chassis is . Message Type LOG Severity INFO Probable Cause Indicates that the chassis has been enabled or disabled. Recommended Action No action is required. NSM-1008 Message Blade () is . Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 658
5 NSM-1010 NSM-1010 Message InterfaceMode changed from to for interface . Message Type LOG Severity INFO Probable Cause Indicates that the interface mode has been changed. Recommended Action No action is required. NSM-1011 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 659
NSM-1013 5 NSM-1013 Message VLAN classifier group is deleted. Message Type LOG Severity INFO Probable Cause Indicates that the specified VLAN classifier group has been deleted. Recommended Action No action is required. NSM-1014 Message VLAN classifier rule is created. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 660
5 NSM-1017 Recommended Action No action is required. NSM-1017 Message Interface is on interface . Message Type LOG Severity INFO Probable Cause Indicates that the logical interface member list has been changed. Recommended Action No action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 661
NSM-1020 5 NSM-1020 Message Interface is administratively down. Message Type LOG Severity INFO Probable Cause Indicates that the administrative status of the specified interface has changed to down. Recommended Action No action is required. Fabric OS Message Reference 639 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 662
5 ONMD-1000 ONMD Messages ONMD-1000 Message LLDP is enabled. Message Type LOG Severity INFO Probable Cause Indicates that the link layer discovery protocol (LLDP) is enabled globally. Recommended Action No action is required. ONMD-1001 Message LLDP is disabled. Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 663
ONMD-1003 5 ONMD-1003 Message LLDP is enabled on interface . Message Type LOG Severity INFO Probable Cause Indicates that the link layer discovery protocol (LLDP) is enabled on the specified interface. Recommended Action No action is required. ONMD-1004 Message LLDP is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 664
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1002 Message ipcInit failed. Message Type LOG Severity WARNING Probable Cause Indicates that the Parity Data Manager (PDM) process - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 665
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1006 Message Too many files in sync.conf. Message Type LOG Severity WARNING Probable Cause Indicates that the sync.conf - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 666
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1008 Message Failed to get the number of U_Ports. Message Type LOG Severity WARNING Probable Cause Indicates that the Parity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 667
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1011 Message File read failed: , Length(read=, expected=), errno - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 668
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1014 Message Access sysmod failed. Message Type LOG Severity WARNING Probable Cause Indicates a system call to sysMod failed - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 669
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1020 Message Long path name (/), Skip. Message Type LOG Severity WARNING Probable Cause Indicates that the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 670
Cause Indicates that the Parity Data Manager (PDM) cannot synchronize with its peer because the Domain Name Service (DNS) is configured with IPv6 addresses. IPv6 is not supported by older firmware. Recommended Action Configure DNS with IPv4 addresses. 648 Fabric OS Message Reference 53-1002749 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 671
cannot synchronize with its peer because the Lightweight Directory Access Protocol (LDAP) server is configured with IPv6 addresses. IPv6 is not supported by older firmware. Recommended Action Configure the LDAP server with IPv4 addresses. PDM-1026 Message User defined roles configured. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 672
5 PDTR-1001 PDTR Messages PDTR-1001 Message . Message Type LOG Severity INFO Probable Cause Indicates that information has been written to the panic dump files. The watchdog register codes are as follows: • 0x10000000 - The watchdog timer (WDT) forced a core reset. • - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 673
does not reboot automatically, reboot the system manually using the reboot command. Execute the then execute the supportSave command and contact your switch service provider. PLAT-1001 Message CP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 674
CRITICAL Probable Cause Indicates that Fabric OS has older field-programmable gate array (FPGA) version. This message is applicable only to Brocade 5470. Recommended Action Upgrade FPGA to new version. PLAT-1072 Message The chassis is disabled because no Core Blades are available. Insert - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 675
PMGR-1001 5 PMGR Messages PMGR-1001 Message Attempt to create switch succeeded. Message Type LOG | AUDIT Class LS Severity INFO Probable Cause Indicates that the switch with the specified fabric ID (FID) was successfully created. Recommended Action No action is required. PMGR-1002 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 676
5 PMGR-1004 PMGR-1004 Message Attempt to delete switch failed. Error message: . Message Type LOG Severity WARNING Probable Cause Indicates that the switch with the specified fabric ID (FID) was not deleted. Recommended Action Refer to the Error Message string displayed in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 677
PMGR-1008 5 Recommended Action No action is required. PMGR-1008 Message Attempt to change switch to switch failed. Error message: . Message Type LOG Severity WARNING Probable Cause Indicates a failed attempt to change the switch fabric ID (FID). Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 678
5 PMGR-1011 PMGR-1011 Message Attempt to move port(s) to switch succeeded. Message Type LOG Severity INFO Probable Cause Indicates a successful attempt to move the ports to the specified switch. Recommended Action No action is required. 656 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 679
port is now disabled because the link on this port had multiple failures that exceeded an internally set threshold on the port. This problem is typically related to hardware. Recommended Action Check and replace (if necessary) the hardware attached to both ends of the specified port number - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 680
Probable Cause Indicates the specified port is configured to be an L_Port, but the port does not support L_Port. If an L_Port is connected, then the port will be disabled because the port does not support L_Port. If an E_Port or F_Port is connected, then the port will not come up because - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 681
. PORT-1010 Message Port (ID: ) QoS is disabled. Message Type LOG Severity INFO Probable Cause Indicates that the port quality of service (QoS) is disabled due to the best effort setting on the 4 Gbps or 8 Gbps long distance platform. Recommended Action No action is required - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 682
Cause Indicates that the port ID (PID) format was changed. Recommended Action No action is required. Refer to the Fabric OS Administrator's Guide for more information about the PID format. PS-1002 Message Failed to initialize the tracing system for Advanced Performance Monitoring. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 683
-to-end monitoring mask on at least one inter-switch link (ISL) port. Recommended Action No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is enabled. ISL monitoring can only be disabled through the Fabric Access API. PS-1004 Message Failed to add - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 684
Cause Indicates that FC Routing (FCR) is enabled on the specified fabric. Recommended Action Top Talker cannot be installed on a fabric with FCR service enabled. In case Top Talker must be installed on a fabric, disable FCR using the fosconfig --disable fcr command. PS-1008 Message Failed to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 685
PS-1009 5 PS-1009 Message Failed to add the device updates in condb database. Message Type LOG Severity WARNING Probable Cause Indicates that the fabric has more than the allowed number of devices. Recommended Action Reduce the number of devices configured in the fabric to be within the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 686
5 PSWP-1001 PSWP Messages PSWP-1001 Message PID for port and port are swapped. New PID for port is 0x and port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 687
WARNING Probable Cause Indicates the bladeSwap command failed on access to configuration data. Recommended Action Retry the command. If the failure persists, contact your switch service provider. Fabric OS Message Reference 665 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 688
WARNING Probable Cause Indicates the bladeSwap command failed on access to switch context. Recommended Action Retry the command. If the failure persists, contact your switch service provider. 666 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 689
FTP transfers; then execute the supportSave command and contact your switch service provider. RAS-1002 Message First failure data capture (FFDC) maximum transfers; then execute the supportSave command and contact your switch service provider. RAS-1004 Message Software 'verify' error detected. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 690
command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. RAS-1006 Message Support data file () automatically transferred to remote address ' '. Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 691
RAS-2001 5 RAS-2001 Message Audit message log is enabled. Message Type LOG | AUDIT Class RAS Severity INFO Probable Cause Indicates that the audit message log has been enabled. Recommended Action No action is required. RAS-2002 Message Audit message log is disabled. Message Type LOG | - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 692
5 RAS-3001 RAS-3001 Message USB storage device plug-in detected. Message Type LOG Severity INFO Probable Cause Indicates that the USB storage device plug-in has been detected. Recommended Action No action is required. RAS-3002 Message USB storage device enabled. Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 693
Recommended Action No action is required. RAS-3005 Message CLI: . Message Type AUDIT Class CLI Severity INFO Probable Cause Indicates that the specified command was executed on console. Recommended Action No action is required. RAS-3005 5 Fabric OS Message Reference 671 53 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 694
RCS Messages RCS-1001 Message RCS has been disabled. Some switches in the fabric do not support this feature. Message Type LOG Severity INFO Probable Cause Indicates that the reliable commit service (RCS) feature has been disabled on the local switch because not all switches in the fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 695
that the specified application did not register with reliable commit service (RCS). Recommended Action Run the haShow command to view the commands. Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later. Run the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 696
Probable Cause Indicates that the specified remote domain is requested to go offline to take it out of the fabric because it does not support reliable commit service (RCS). Recommended Action Run the fabricShow command to verify that the remote domain is out of the fabric. 674 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 697
Type LOG | FFDC Severity WARNING Probable Cause Indicates that the specified domain is RCS-incapable. Recommended Action Execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 675 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 698
LOG | FFDC Severity WARNING Probable Cause Indicates that the specified remote domain is RCS-incapable. Recommended Action Execute the supportSave command and contact your switch service provider. 676 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 699
RKD-1001 5 RKD Messages RKD-1001 Message operation . Target: , Initiator: , LUN ID: . SessionId:/. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 700
5 RKD-1004 RKD-1004 Message Message: . Message Type LOG Severity INFO Probable Cause Indicates the generic re-key message. Recommended Action No action is required. RKD-1005 Message LUN with LSN: does no have metadata. Make note of key ID - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 701
RMON-1001 5 RMON Messages RMON-1001 Message RMON rising threshold alarm from SNMP OID . Message Type LOG Severity INFO Probable Cause Indicates that the threshold level was exceeded for the sample type of the remote monitoring (RMON) alarm. Recommended Action Check the traffic on the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 702
an authentication error was reported. The specified client IP address has faulty credentials. Recommended Action Enter the correct user name and password from the Fabric Access API host. RPCD-1002 Message Missing certificate file. Secure RPCd is disabled. Message Type LOG Severity WARNING - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 703
RPCD-1004 5 RPCD-1004 Message Invalid certificate file. Secure RPCd is disabled. Message Type LOG Severity WARNING Probable Cause Indicates the Secure Sockets Layer (SSL) certificate file has been corrupted. Recommended Action To enable remote procedure call daemon (RPCD) in secure mode, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 704
5 RPCD-1007 Recommended Action Run the secCertUtil command to install a valid private key file. 682 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 705
RTE-1001 5 RTE Messages RTE-1001 Message Detected route inconsistency. It may cause connectivity issues. If such issues arise, bounce all ISLs and ICLs on this chassis. Message Type LOG Severity WARNING Probable Cause Indicates that the constraints that are used to determine the paths for - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 706
. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 684 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 707
. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 685 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 708
. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 686 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 709
. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 687 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 710
package may be corrupted, the time stamp on the package may be out of range as a result of replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure may result from an internal error, such as losing the primary public key or an invalid database - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 711
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1005 Message Primary FCS receives data request from domain . Message Type LOG Severity INFO Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 712
5 SEC-1007 SEC-1007 Message Security violation: Unauthorized host with IP address tries to establish API connection. Message Type LOG Severity INFO Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 713
on the switch. If the private key does not exist, follow the steps for re-creating PKI objects outlined in the Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the certificate by following the field upgrade process. Fabric OS Message Reference 691 53-1002749 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 714
5 SEC-1024 SEC-1024 Message The security database is too large to fit in flash. Message Type LOG Severity INFO Probable Cause Indicates the size of the security database is too large for the flash memory. The size of the security database increases with the number of entries in each - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 715
SEC-1028 5 SEC-1028 Message No name is specified. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can occur only when the primary fabric configuration server (FCS) distributes the security database to the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 716
by standby. CPs will go out of sync. Message Type LOG Severity WARNING Probable Cause Indicates the security database size is not supported by the standby control processor (CP). Recommended Action Reduce the security policy size by deleting entries within a policy or by deleting some policies - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 717
SEC-1034 5 SEC-1034 Message Invalid member . Message Type LOG Severity ERROR Probable Cause Indicates the input list has an invalid member. Recommended Action Verify the member names, and input the correct information. SEC-1035 Message Invalid device WWN . - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 718
5 SEC-1038 Recommended Action Run the command again using the standard WWN format; 16 hexadecimal digits grouped as 8 colon-separated pairs, for example, 50:06:04:81:D6:F3:45:42. SEC-1038 Message Invalid domain . Message Type LOG Severity ERROR Probable Cause Indicates an invalid - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 719
SEC-1041 5 SEC-1041 Message Invalid port member in portlist (). . Message Type LOG Severity ERROR Probable Cause Indicates the port member is invalid for one of the following reasons: • The value is not a number. • The value is too long. Valid numbers must be - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 720
5 SEC-1044 SEC-1044 Message Duplicate member in (). Message Type LOG Severity ERROR Probable Cause Indicates the specified member is a duplicate in the input list. The list can be a policy list or a switch member list. Recommended Action Do not specify any duplicates. SEC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 721
SEC-1049 5 SEC-1049 Message Invalid switch name . Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 722
5 SEC-1052 SEC-1052 Message Invalid input. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 723
SEC-1055 5 SEC-1055 Message Invalid FCS list . Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 724
in Domain List. Message Type LOG Severity ERROR Probable Cause Indicates that either no domains or domains more than the maximum number supported are specified. Recommended Action Enter the correct number of domains. SEC-1063 Message Failed to reset statistics. Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 725
Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1071 Message No new security policy data to apply. Message Type LOG Severity ERROR Probable Cause Indicates that no changes - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 726
Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1073 Message No FCS policy in list. Message Type LOG Severity ERROR Probable Cause Indicates the specific policy type is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 727
SEC-1075 5 SEC-1075 Message Fail to new policy set on all switches. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 728
5 SEC-1078 SEC-1078 Message No new data to abort. Message Type LOG Severity ERROR Probable Cause Indicates there are no new changes in the defined security policy database that can be aborted. Recommended Action Verify the security event was planned. Verify if there were really any changes to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 729
SEC-1081 5 SEC-1081 Message Entered a name for a DCC policy ID that was not unique. Message Type LOG Severity ERROR Probable Cause Indicates the Device Connection Control (DCC) policy name given in the secPolicyCreate command was the same as another DCC policy. Recommended Action Make sure - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 730
5 SEC-1084 SEC-1084 Message Name exists for different type . Message Type LOG Severity ERROR Probable Cause Indicates the specified policy already exists. Recommended Action No action is required. SEC-1085 Message Failed to create . Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 731
SEC-1087 5 SEC-1087 Message The security database is larger than the data distribution limit of fabric bytes. Message Type LOG Severity ERROR Probable Cause Indicates the security database has more data than can be distributed to some of the switches in the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 732
5 SEC-1090 SEC-1090 Message SCC list contains FCS member. Please remove member from the FCS policy first. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 733
SEC-1093 5 SEC-1093 Message New FCS list must have at least one member in common with current FCS list. Message Type LOG Severity ERROR Probable Cause Indicates the new fabric configuration server (FCS) list does not have a common member with the existing FCS list. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 734
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. SEC-1098 Message No FCS list. Message Type LOG Severity ERROR Probable Cause Indicates the specified policy could - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 735
SEC-1099 5 SEC-1099 Message Please enable your switch before running secModeEnable. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 736
and retry the operation. If a valid certificate is not installed, install a certificate by following the procedure specified in the Fabric OS Administrator's Guide. SEC-1105 Message Fail to disable secure mode on all switches. Message Type LOG Severity ERROR Probable Cause Indicates the switch - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 737
switch. If a failure to validate PKI objects occurs, follow the steps for re-creating PKI objects outlined in the Fabric OS Administrator's Guide. SEC-1107 Message Stamp is 0. Message Type LOG Severity INFO Probable Cause Indicates a corruption occurred during the distribution of the security - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 738
5 SEC-1110 SEC-1110 Message FCS list must be the first entry in the [Defined Security policies] section. Fail to download defined database. Message Type LOG Severity ERROR Probable Cause Indicates that a security policy download was attempted with a defined policy that does not have the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 739
SEC-1113 5 SEC-1113 Message [ license ] going to expire in day(s). Message Type LOG | AUDIT Class SECURITY Severity WARNING Probable Cause Indicates the license period will expire soon. Recommended Action Get a new license for this feature. SEC-1114 Message < - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 740
fabric configuration server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Action Run the could not be set. Usually this problem is transient. Recommended Action Retry the command. 718 Fabric OS Message Reference - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 741
SEC-1119 5 SEC-1119 Message Secure mode has been enabled. Message Type LOG Severity INFO Probable Cause Indicates the secure Fabric OS was enabled by the secModeEnable command. Recommended Action Verify the security event was planned. If the security event was planned, there is no action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 742
5 SEC-1123 SEC-1123 Message Security database downloaded by Primary FCS. Message Type LOG Severity INFO Probable Cause Indicates the security database was successfully downloaded from the primary fabric configuration server (FCS). Recommended Action No action is required. SEC-1124 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 743
data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure indicates either an internal error (such as losing the primary public key) or an invalid database - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 744
data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure indicates either an internal error (such as losing the primary public key) or an invalid database - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 745
• The names for the specified policies have changed. • The passwords have changed for the specified accounts. • The SNMP community strings RCS is not supported. Message Type LOG Severity INFO Probable Cause Indicates that reliable commit service (RCS) is not supported. Recommended Action Run - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 746
5 SEC-1154 SEC-1154 Message PID change failed: . Message Type LOG Severity INFO Probable Cause Indicates that either the defined or the active policy could not be updated. If the policy database is very large, it might not be able to change the index/ - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 747
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SEC-1158 Message Invalid name . Message Type LOG Severity INFO Probable Cause Indicates the specified name is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 748
5 SEC-1160 SEC-1160 Message Duplicate port in port list (). Message Type LOG Severity INFO Probable Cause Indicates a duplicate port member exists in the specified port list. Recommended Action Verify that there is no duplicate port member in the port list. SEC-1163 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 749
SEC-1166 5 Recommended Action Wait a few minutes and try the command again. SEC-1166 Message Non FCS tries to commit failover. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 750
5 SEC-1170 SEC-1170 Message This command must be executed on the Primary FCS switch, the first reachable switch in the FCS list. Message Type LOG Severity INFO Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 751
; if not, check the primary FCS. SEC-1174 Message Failed to set password. Message Type LOG Severity ERROR Probable Cause Indicates the fabric configuration server (FCS) or non-FCS password could not be set. Recommended Action Verify all switches in the fabric are in time - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 752
5 SEC-1176 SEC-1176 Message Failed to generate new version stamp. Message Type LOG Severity ERROR Probable Cause Indicates the primary fabric configuration server (FCS) failed to generate a new version stamp because the fabric was not stable. Recommended Action Verify all switches in the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 753
Message Type LOG Severity INFO Probable Cause Indicates the specified action is applied to the specified remote authentication dial-in user service (RADIUS/LDAP/TACACS+) server configuration. The possible actions are ADD, REMOVE, CHANGE, and MOVE. Recommended Action No action is required. SEC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 754
5 SEC-1186 SEC-1186 Message Configuration. Message Type LOG Severity INFO Probable Cause Indicates the RADIUS, LDAP, or TACACS+ configuration was enabled or disabled as the primary authentication, accounting, and authorization (AAA) mechanism. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 755
SEC-1189 5 SEC-1189 Message Security violation: Unauthorized host with IP address tries to do SNMP write operation. Message Type LOG Severity INFO Probable Cause Indicates an SNMP security violation was reported. The specified unauthorized host attempted to perform a write SNMP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 756
The error message lists the violating IP address. Verify that this IP address is being used by a valid switch admin. Use the correct password. SEC-1194 Message This switch does not have all the required PKI objects correctly installed. Message Type LOG Severity WARNING Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 757
may not be correctly updated for that specific switch. SEC-1196 Message Switch does not have all default account names. Message Type LOG Severity WARNING Probable Cause Indicates the default switch accounts admin and user do not exist on the switch when enabling security. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 758
5 SEC-1198 SEC-1198 Message Security violation: Unauthorized host with IP address tries to establish API connection. Message Type LOG Severity INFO Probable Cause Indicates an API security violation was reported. The specified unauthorized host attempted to establish an API - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 759
SEC-1201 5 SEC-1201 Message Security violation: MS device operates on non-primary FCS switch. Message Type LOG Severity INFO Probable Cause Indicates a management server (MS) operation security violation was reported. An MS device operation occurred on a non-primary fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 760
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. SEC-1253 Message Bad DCC interface state during , state=. Message Type LOG Severity ERROR Probable Cause Indicates an - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 761
Recommended Action Turn off VC-encoded mode before enabling security. SEC-1301 Message This switch is in interop mode. Security is not supported. Message Type LOG Severity INFO Probable Cause Indicates the switch is enabled in interop mode. Recommended Action Disable interop mode using the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 762
Run the firmwareDownload command to update the firmware to the latest version for your specific switch. Verify the firmware you are installing supports the Brocade Secure Fabric OS feature. SEC-1304 Message This switch has no security license. Message Type LOG Severity INFO Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 763
on the switch. If a failure to validate PKI objects occurs, follow the steps for re-creating PKI objects outlined in the Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access the fabric. SEC-1307 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 764
for the reliable commit service (RCS) transaction to complete. Recommended Action Verify if there are any reliable commit service (RCS) or Reliable cannot be enabled because one or more of the password policies is not set to default value. Message Type LOG Severity ERROR Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 765
were set to default values. Message Type LOG Severity INFO Probable Cause Indicates the password configuration parameters were set to default values. Recommended to fix this error. If the problem persists, contact your switch service provider. Fabric OS Message Reference 743 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 766
5 SEC-1315 SEC-1315 Message command failed - db(s) configured for rejection on this switch. Message Type LOG Severity ERROR Probable Cause Indicates there was an attempt to distribute databases to a switch that was configured not to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 767
tries to join a fabric with strict fabric wide policy. Message Type LOG Severity WARNING Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with the strict fabric-wide policy. Recommended Action No action is required - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 768
Some DCC policy is too large, distribution cancelled. Message Type LOG Severity WARNING Probable Cause Indicates this fabric is not able to support a Device Connection Control (DCC) policy with more than 256 ports. Recommended Action Reconfigure any policy that includes more than 256 ports in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 769
5 SEC-1324 Message Fabric transaction failure. RCS error: . Message Type LOG Severity INFO Probable Cause Indicates the reliable commit service (RCS) transaction failed with the specified reason code. Recommended Action Verify the event was planned. If the event was planned, no - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 770
system failure. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 748 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 771
planned. If the security event was planned, run the ipfilter --activate default_ipv4 command or the ipfilter --activate default_ipv6 command to activate default IP filter policies. Use the ipfilter --save or ipfilter --transabort commands to save or abort the active transaction on IP filter policies - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 772
5 SEC-1333 SEC-1333 Message command failed. There are VF enabled switch(s) in fabric. db(s) distribution is blocked. Message Type LOG Severity ERROR Probable Cause Indicates there was an attempt to distribute PWD or IPFILTER - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 773
as defined by your enterprise security policy. SEC-1338 Message . Message Type LOG Severity INFO Probable Cause Indicates the password configuration parameters changed. Recommended Action Verify the security event was planned. If the security event was planned, no action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 774
: • There has been a fabric configuration server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password has changed. 752 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 775
SEC-3003 5 Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. SEC-3003 Message Event: , Status: success, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 776
5 SEC-3006 Recommended Action Verify the addition of members to the policy was planned. If the addition of members was planned, no action is required. If the addition of members was not planned, take appropriate action as defined by your enterprise security policy. SEC-3006 Message Event: < - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 777
SEC-3009 5 Recommended Action Verify the modification was planned. If the modification was planned, no action is required. If the modification was not planned, take appropriate action as defined by your enterprise security policy. SEC-3009 Message Event: , Status: success, Info: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 778
Message Event: , Status: success, Info: Temp Passwd on domain [] for account [ - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 779
SEC-3015 5 Recommended Action Verify the RADIUS configuration was changed intentionally. If the RADIUS configuration was changed intentionally, no action is required. If the RADIUS configuration was not changed intentionally, take appropriate action as defined by your enterprise security policy. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 780
configuration parameter was intentionally set to default values. If the password configuration parameter was intentionally set to default values, no action is required. If the password configuration parameter was not intentionally set to default values, take appropriate action as defined by your - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 781
SEC-3020 5 SEC-3020 Message Event: , Status: success, Info: Successful login attempt via . Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates a successful login occurred. An IP address is displayed when the login occurs - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 782
automatically unlock after the lockout duration has expired or an administrator may manually unlock the account. SEC-3024 Message Event: , Status: success, Info: User account [], password changed. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 783
SEC-3026 5 SEC-3026 Message Event: , Status: success, Info: User account [], role changed from [] to []. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates a user account role was changed. Recommended Action Verify - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 784
5 SEC-3029 SEC-3029 Message Event: , Status: success, Info: Backup user account \"\" recovered. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that backup user accounts were recovered. Recommended Action Verify the security event was - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 785
SEC-3032 5 SEC-3032 Message Event: , Status: success, Info: Switch is configured to database. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates the specified event has occurred to accept or reject a certain database. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 786
5 SEC-3035 SEC-3035 Message Event: ipfilter, Status: success, Info: ipfilter policy(ies) saved. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates the specified IP filter policies has been saved. Recommended Action Verify the security event was - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 787
SEC-3038 5 SEC-3038 Message Event: ipfilter, Status: failed, Info: Failed to activate ipfilter policy. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates the specified IP filter policy failed to activate. Recommended Action Verify the security - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 788
5 SEC-3045 SEC-3045 Message Zeroization has been executed on the system. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates the system has been zeroized. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 789
SEC-3048 5 SEC-3048 Message FIPS mode has been enabled in the system using force option. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates the system has been forced to Federal Information Processing Standards (FIPS) mode. Recommended Action Verify the security event - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 790
5 SEC-3051 SEC-3051 Message The license key is . Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that a license key is added or removed. Recommended Action No action is required. SEC-3061 Message Role '' is created. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 791
SEC-3063 5 SEC-3063 Message Role '' is copied from ''. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the specified role name has been copied from the source role. Recommended Action No action is required. SEC-3064 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 792
5 SEC-3066 SEC-3066 Message Configuration of user-defined roles is downloaded. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates the configuration of user-defined roles has been downloaded. Recommended Action No action is required. SEC-3067 Message Invalid - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 793
SFLO-1001 5 SFLO Messages SFLO-1001 Message sFlow is globally. Message Type LOG Severity INFO Probable Cause Indicates that sFlow is globally enabled or disabled. Recommended Action No action is required. SFLO-1002 Message sFlow is for port . Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 794
5 SFLO-1004 SFLO-1004 Message Global sFlow polling interval is changed to . Message Type LOG Severity INFO Probable Cause Indicates that the global counter sampling interval has been changed to the specified value. Recommended Action No action is required. SFLO-1005 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 795
Recommended Action No action is required. SFLO-1008 Message All the sFlow collectors are unconfigured. Message Type LOG Severity INFO Probable Cause Indicates that none of the sFlow collectors are configured. Recommended Action No action is required. SFLO-1008 5 Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 796
SNMP-1002 Message SNMP initialization failed. Message Type LOG Severity ERROR Probable Cause Indicates that the initialization of the SNMP service failed and therefore you will not be able to query the switch through SNMP. Recommended Action Restart or power cycle the switch - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 797
Indicates that the SNMP configuration is incorrect and therefore the SNMP service will not work correctly. Recommended Action Change the SNMP configuration to the default using the snmpConfig --default command. SNMP-1005 Message SNMP configuration attribute, , has changed - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 798
5 SNMP-1009 SNMP-1009 Message Port traps are on port . Message Type AUDIT | LOG Class CFG Severity INFO Probable Cause Indicates the blocked or unblocked status of the port traps on the specified port. Recommended Action Execute the snmpTraps --show command to view the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 799
SPC-1001 5 SPC Messages SPC-1001 Message S, Cryptographic operation enabled. Message Type LOG Severity INFO Probable Cause Indicates that the cryptographic operation is enabled on an encryption engine. Recommended Action No action is required. SPC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 800
5 SPC-2001 SPC-2001 Message S, : Crypto error asserted by Vader/OB1 0x. Message Type LOG Severity ERROR Probable Cause Indicates that Crypto error is asserted by the Field-Programmable Gate Array (FPGA). Recommended Action No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 801
SPC-2004 5 SPC-2004 Message S, : FPGA firmware download failed: 0x. Message Type LOG Severity ERROR Probable Cause Indicates that FPGA download has failed. Recommended Action No action is required. SPC-2005 Message S - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 802
5 SPC-2007 SPC-2007 Message S, : Crypto post tests success: 0x. Message Type LOG Severity INFO Probable Cause Indicates that Crypto Power-On Self-Test (POST) has passed successfully. Recommended Action No action is required. SPC - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 803
SPC-2010 5 SPC-2010 Message S, : Crypto subsystem cover is open. Message Type LOG Severity CRITICAL Probable Cause Indicates that the Crypto subsystem cover is open. Recommended Action Close the Crypto subsystem cover properly. SPC- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 804
Cause Indicates hardware failure. Recommended Action The shelf life of the system may be reduced. Contact the vendor for further instructions. SPC-2014 Message S, : Low Battery Level Detected. Message Type LOG Severity WARNING Probable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 805
SPC-2041 5 SPC-2041 Message S, : Alloc freemsg block failed. Message Type LOG Severity ERROR Probable Cause Indicates an allocation failure for the pool of SB message. Recommended Action No action is required. SPC-2042 Message S - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 806
5 SPC-2044 SPC-2044 Message S, : Read - device not open . Message Type LOG Severity WARNING Probable Cause Indicates that the SPD device is not opened. Recommended Action No action is required. SPC-3001 Message S< - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 807
DEK format • 32 - DEK could not be unwrapped • 33 - FGPA error upon inject • 73 - Invalid key encryption key (KEK) format Recommended Action Contact your switch service provider for assistance. Fabric OS Message Reference 785 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 808
error upon inject • 73 - Invalid KEK format Recommended Action For status code 14, complete primary KEK generation; otherwise, contact your switch service provider. SPC-3007 Message S, : DEK create error: , info: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 809
SPC-3008 5 SPC-3008 Message S, : SP crypto got READY notification. Message Type LOG Severity INFO Probable Cause Indicates that the key application (KPD) within the CryptoModule of the encryption engine has been started. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 810
code>. Message Type LOG Severity ERROR Probable Cause Indicates that the CryptoModule internal Secret Encryption Key could not be generated. Recommended Action Contact your switch service provider for assistance. 788 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 811
LOG Severity ERROR Probable Cause Indicates that the CryptoModule internal random number generator has failed. Recommended Action Contact your switch service provider for assistance. SPC-3015 Message S, : RSA pairwise key generation test - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 812
Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SPM-1003 Message Set New Group Cfg SC Enable KV Type . Message Type LOG Severity INFO Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 813
SPM-1004 5 SPM-1004 Message Initialize Node. Message Type LOG Severity INFO Probable Cause Indicates a node initialization. Recommended Action No action is required. SPM-1005 Message Set EE Control slot action . Message Type LOG Severity INFO Probable Cause Indicates - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 814
5 SPM-1008 Recommended Action No action is required. SPM-1008 Message Dergistered SP Certificate in slot . Message Type LOG Severity INFO Probable Cause Indicates an security processor (SP) certificate de-registration. Recommended Action No action is required. SPM-1009 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 815
out of sync. Message Type LOG Severity ERROR Probable Cause Indicates a failure to distribute security database. Recommended Action Execute the cryptocfg --sync -securitydb command to manually sync the security database. Fabric OS Message Reference 793 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 816
LOG Severity WARNING Probable Cause Indicates a failure to distribute the security database. Recommended Action Use the cryptocfg --sync -securitydb command to manually sync security database. SPM-1016 Message Security database is out of sync. This warning can be ignored if the nodes in the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 817
SPM-3001 5 SPM-3001 Message Event: cryptocfg Status: success, Info: Node [] initialized. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates a node was initialized. Recommended Action No action is required. SPM-3002 Message Event: cryptocfg Status: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 818
5 SPM-3004 SPM-3004 Message Event: cryptocfg Status: success, Info: EE in slot enabled. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates an encryption engine was enabled. Recommended Action No action is required. SPM-3005 Message Event: cryptocfg Status - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 819
SPM-3007 5 SPM-3007 Message Event: cryptocfg Status: success, Info: File imported via scp: []:. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates a file was imported through SCP protocol Recommended Action No action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 820
5 SPM-3010 SPM-3010 Message Event: cryptocfg Status: success, Info: EE in slot zeroized. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates an encryption engine was zeroized. Recommended Action No action is required. SPM-3011 Message Event: cryptocfg - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 821
SPM-3013 5 SPM-3013 Message Event: cryptocfg Status: success, Info: Key vault with certificate label \"\" deregistered. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates a key vault was deregistered. Recommended Action No action is required. SPM- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 822
5 SPM-3016 SPM-3016 Message Event: cryptocfg Status: success, Info: Master key generated. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates a master key was generated Recommended Action No action is required. SPM-3017 Message Event: cryptocfg Status: success, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 823
SPM-3019 5 SPM-3019 Message Event: cryptocfg Status: success, Info: System card registered. Certificate label: \"\" Certificate file: \"\". Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates a system card was registered. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 824
5 SPM-3022 SPM-3022 Message Event: cryptocfg Status: success, Info: Authentication card with certificate label \"\" deregistered. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates an authentication card was deregistered. Recommended Action No action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 825
SPM-3025 5 SPM-3025 Message Event: cryptocfg Status: success, Info: File imported via USB: Source: Destination: . Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates a file was imported through a USB device. Recommended Action No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 826
5 SPM-3028 SPM-3028 Message Event: SPM-EE state changed, Info: EE State: . Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates an encryption engine state has changed. Recommended Action No action is required. SPM-3029 Message Event: KeyVault Connection - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 827
Execute the supportFtp command (as needed) to set the FTP or SCP parameters. After the problem is corrected, execute the supportSave command again. SS-1002 Message supportSave has stored support information to the USB storage device. Message Type LOG Severity INFO Probable Cause Indicates that - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 828
executed by the supportSave command. Recommended Action Execute the usbstorage command to check the USB storage device settings. After the USB problem is corrected, execute the supportSave command again. SS-1004 Message One or more modules timed out during supportsave. Retry supportsave with - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 829
SS-1006 5 SS-1006 Message supportsave not collected for slot . Reason: blade was not available to accept a supportsave request. Message Type LOG Severity WARNING Probable Cause Indicates that the supportsave request was not sent to the blade in the specified slot. Recommended - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 830
5 SS-1009 SS-1009 Message supportsave failed. Reason:No ISC connection for . Message Type LOG Severity WARNING Probable Cause Indicates that there is no Inter-Subsystem Communication (ISC) connection for the specified - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 831
enough disk space in the secondary partition of the active CP to save the supportsave files, before uploading them to the remote host. Recommended Action Manually clean up the secondary partition of the active CP to collect the supportsave files. Fabric OS Message Reference 809 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 832
to initialize rc = . Message Type LOG Severity ERROR Probable Cause Indicates that the initialization of a module within System Services Manager (SSM) has failed. Recommended Action Download a new firmware using the firmwareDownload command. SSMD-1003 Message Failed to lock - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 833
while programming a Ternary Content Addressable Memory (TCAM) entry on the specified interface. Recommended Action Try again after some time. If the problem persists, execute the supportSave command and then restart or power cycle the switch. Fabric OS Message Reference 811 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 834
enforcing the Multicast Rate Limit feature. Recommended Action Delete and reapply the Quality of Service (QoS) Multicast Rate Limit policy using the qos rcv-queue multicast rate-limit command. If the problem persists, restart or power cycle the switch. 812 Fabric OS Message Reference 53-1002749 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 835
flow control feature. Recommended Action Delete and reapply the QoS 802.3x Pause flow control policy using the qos flowcontrol command. If the problem persists, restart or power cycle the switch. SSMD-1203 Message QoS failed programming interface 0x PFC flow control. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 836
the dataplane ASIC for enforcing the CEE Map Class of Service (CoS) to Priority Group ID (PGID) mapping feature. Recommended Action Delete and reapply the CEE Map CoS to PGID policy using the cee-map default command. If the problem persists, restart or power cycle the switch. 814 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 837
an unexpected error in programming the dataplane ASIC for enforcing the interface Default CoS feature. Recommended Action Delete and reapply the QoS interface Default CoS policy using the qos cos command. If the problem persists, restart or power cycle the switch. SSMD-1208 Message QoS failed - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 838
feature. Recommended Action Delete and reapply the QoS interface CoS to Traffic Class policy using the qos cos-traffic-class command. If the problem persists, restart or power cycle the switch. SSMD-1211 Message QoS failed programming ASIC / Scheduler Control - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 839
Drop Threshold feature. Recommended Action Delete and reapply the QoS CoS Tail Drop Threshold policy using the qos rcv-queue command. If the problem persists, restart or power cycle the switch. SSMD-1214 Message QoS failed programming interface 0x CoS Tail Drop Threshold. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 840
5 SSMD-1216 SSMD-1216 Message QoS failed programming interface 0x Pause. Message Type LOG Severity WARNING Probable Cause Indicates that DCE SSM encountered an unexpected error in programming the dataplane ASIC for enforcing the interface Pause feature. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 841
SSMD-1301 5 SSMD-1301 Message CEE Map is deleted. Message Type LOG Severity INFO Probable Cause Indicates that the specified CEE Map has been deleted. Recommended Action No action is required. SSMD-1302 Message CEE Map priority table are . Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 842
5 SSMD-1305 Recommended Action No action is required. SSMD-1305 Message CEE Map priority group weight is changed from to . Message Type LOG Severity INFO Probable Cause Indicates that the specified priority group weight has been changed. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 843
SSMD-1308 5 SSMD-1308 Message access list is deleted. Message Type LOG Severity INFO Probable Cause Indicates that the specified access list has been deleted. Recommended Action No action is required. SSMD-1309 Message access list rule sequence - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 844
5 SSMD-1312 Recommended Action No action is required. SSMD-1312 Message assigned to interface . Message Type LOG Severity INFO Probable Cause Indicates that the specified user profile map has been assigned to the interface. Recommended Action No action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 845
configuration. Message Type LOG Severity INFO Probable Cause Indicates that the specified CEE Map is reset to the default using the no cee-map name command. Recommended Action No action is required. SSMD-1317 Message ACL is being configured on interface . This - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 846
5 SSMD-1318 SSMD-1318 Message ACL is being removed from interface . This operation could take a long time. Message Type LOG Severity INFO Probable Cause Indicates that the specified access list is being removed from the interface. Recommended Action No action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 847
SULB-1001 5 SULB Messages SULB-1001 Message Firmwaredownload command has started. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that the firmwareDownload command has been entered. This process should take approximately 17 minutes. The process is set to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 848
5 SULB-1004 Recommended Action No action is required. Run the firmwareDownloadStatus command for more information. SULB-1004 Message Firmwarecommit has completed. Message Type AUDIT | LOG Class FIRMWARE Severity INFO Probable Cause Indicates that the firmwareCommit command has completed - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 849
SULB-1007 5 SULB-1007 Message Standby CP reboots. Message Type LOG Severity INFO Probable Cause Indicates that the standby control processor (CP) is rebooting with new firmware. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 850
5 SULB-1009 TABLE 7 Status messages and status codes (Continued) Status message "Sanity check failed because HAMD is disabled on active CP." "Sanity check failed because firmware download process is already in progress." "Sanity check failed because Fabric OS is disabled on standby CP." "Sanity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 851
SULB-1009 5 TABLE 7 Status messages and status codes (Continued) Status message Status code "Standby CP failed to boot up." 0x6f "Standby CP booted up with new firmware." 0x70 "Standby CP failed to boot up with new firmware." 0x71 "Firmware download has completed successfully on standby - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 852
is inconsistent. For example: swap OSRootPartitions and reboot." 0x11 "Unable to access the required package list file. Check whether the switch is supported by the requested firmware. Also check the firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 853
0x26 "Unexpected reboot." 0x27 "Primary kernel partition is inconsistent. Contact your switch service provider for recovery." 0x28 "The pre-install script failed." 0x29 "The platform option is not supported." 0x2a "Failed to install RPM package." 0x2b "Cannot downgrade directly to this - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 854
two releases older than the requested firmware. The firmware download operation supports firmware upgrades within two feature releases (a feature release is indicated by period. It is most often caused by network issues. If the problem persists, contact your system administrator. • 0x24 - "Out of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 855
firmware onto the CPs. Refer to the Fabric OS Troubleshooting Guide for troubleshooting information. SULB-1010 Message Firmwarecommit failed (status=0x - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 856
information. Refer to the Fabric OS Troubleshooting Guide for troubleshooting information. SULB-1017 Message Firmwaredownload failed the blade to trigger another firmware download. If the problem persists, contact your switch service provider. SULB-1018 Message Firmwaredownload timed out in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 857
. If the blade is stuck in LOADING state, remove and re-insert the blade to trigger another firmware download. If the problem persists, contact your switch service provider. SULB-1021 Message Firmware is being downloaded to the blade in slot . Message Type AUDIT | LOG Class FIRMWARE - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 858
, firmware download will be restarted automatically on the blade. Run the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service provider. SULB-1024 Message Firmware commit has completed on the blade in slot . Message Type AUDIT - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 859
firmwareDownload command will continue after the switch has rebooted. Run the firmwareDownloadStatus command to monitor progress. If the problem persists, contact your switch service provider. SULB-1031 Message The switch is relocating an internal firmware image. Message Type AUDIT | LOG Class - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 860
. Recommended Action Reboot the switch. This will cause the internal image to be relocated again. Use the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service provider. 838 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 861
internal image to be relocated again. If the problem persists, contact your switch service provider. SULB-1036 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 862
co-CPU firmware. Recommended Action After the firmware download completes, reboot the CP manually to bring up the co-CPU and run the firmwareDownload command again. If the problem persists, your switch service provider. SULB-1039 Message CP has completed relocating the internal firmware image - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 863
SULB-1041 5 SULB-1041 Message Firmware has been activated successfully on standby CP. Message Type AUDIT | LOG Class FIRMWARE Severity INFO Probable Cause Indicates that the firmwareActivate command has completed successfully on the standby control processor (CP). Recommended Action No - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 864
5 SULB-1044 SULB-1044 Message Firmwaredownload to secondary partition has completed successfully. Message Type LOG Severity INFO Probable Cause Indicates that the firmwareDownload command to the secondary partition has completed successfully and the switch will come up with the updated - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 865
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. SWCH-1002 Message Security violation: Unauthorized device tries to flogin to port . Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 866
or power cycle the switch. SWCH-1006 Message HA state out of sync: Standby CP (ver = ) does not support NPIV functionality. (active ver = , NPIV devices = ). Message Type LOG Severity WARNING Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 867
the blade enabled with the port configuration that does not support port swap. Recommended Action Replace the blade with ports that support port swap. Then swap ports back to the port's default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. SWCH-1009 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 868
Area on ports that had Trunk Area enabled previously. Refer to the Fabric OS Administrator's Guide for more information. SWCH-1011 Message HA out of sync: Stby CP (ver=) doesn't support Trunk Area functionality. (active ver=, TA enabled on sw= - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 869
Message . Message Type LOG Severity WARNING Probable Cause Indicates that an internal problem has been detected by the software. This is usually an internal Fabric OS problem or due to file corruption. Recommended Action Reboot or power - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 870
on the Loop device. Message Type LOG Severity INFO Probable Cause Indicates persistent port ID (PID) is set and static persistent PID is not supported on loop device. Recommended Action Remove the WWN-PID binding using the wwnaddress --unbind command and re-enable the port. SWCH-1018 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 871
of service (QoS). Recommended Action Load a firmware version on the standby CP that supports QoS links to Access Gateway by using the firmwareDownload command. SWCH-1021 Message HA state out of sync: Standby CP (ver = ) does not support Dynamic area on default switch - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 872
the switch has ports with FICON Management Server (FMS) reserved areas (0xFE, 0xFF) that are not supported in FMS mode. Recommended Action No action required. Refer to the FICON Administrator's Guide for more information. SWCH-1023 Message HA state out of sync: Standby CP (ver = - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 873
time configured for non 16 Gbps-capable FC ports, go to the default switch and execute the configShow command. SWCH-1026 Message HA state out of sync: Standby CP (ver = ) does not support auto csctl_mode (Active CP version = ). Message Type LOG Severity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 874
or failover sequence, waiting for one or more programs to register with system services or to fail over to active status. Recommended Action The switch is in . Recommended Action Execute the supportSave command to gather troubleshooting data. No further action is required. 852 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 875
daemon is not restarted, either because a restart limit is reached or a restart action fails. Recommended Action Execute the supportSave command to gather troubleshooting data. Execute the reboot or haFailover command to recover the system. Fabric OS Message Reference 853 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 876
. Run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. SYSM-1002 Message , Switch: . Message Type LOG Severity INFO Probable Cause Indicates a user has executed either the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 877
SYSM-1004 5 SYSM-1004 Message Failed to retrieve current chassis configuration option, ret=. Message Type LOG Severity ERROR Probable Cause Indicates there was a failure to read configuration data from the World Wide Name (WWN) card. Recommended Action Verify that the WWN card is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 878
5 SYSM-1007 SYSM-1007 Message PERMITTING USE OF INCOMPATIBLE CHASSIS FOR CP IN SLOT . DATA ERRORS MAY RESULT. Message Type LOG Severity WARNING Probable Cause Indicates an override of the incompatible control processor (CP) or chassis check. This message is for engineering use - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 879
TAPE-1001 5 TAPE Messages TAPE-1001 Message Key acquisition for . Message Type LOG Severity INFO Probable Cause Indicates that the key acquisition for the pool or the container has begun or is complete. Recommended Action No action is required. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 880
manually by issuing the tracedump -n command. • TRIGGER: Triggered by a specific Message ID generated by CRITICAL RASLog message. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 881
persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1004 Message Trace dump was not transferred because trace auto-FTP disabled. Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 882
, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1008 Message Unable to load trace parameters. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the active - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 883
command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1011 Message Trace dump manually transferred to target ' ': . Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 884
5 TRCE-1013 TRCE-1013 Message Trace dump was not transferred as FIPS mode is enabled. Message Type LOG Severity WARNING Probable Cause Indicates that a trace dump has occurred on the switch or the specified slot, but the trace dump files were not - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 885
Type LOG Severity INFO Probable Cause Indicates the track change feature recorded a failed login. This occurs if the user name or password is entered incorrectly. Recommended Action Normally, this message indicates a typing error by an authorized user. If this message occurs repeatedly, it - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 886
5 TRCK-1004 TRCK-1004 Message Config file change from task: Message Type LOG Severity INFO Probable Cause Indicates the track change feature recorded a configuration change for the switch. The track change feature records any change to the configuration file in nonvolatile memory, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 887
server IP configured correctly, and the configured clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock server to LOCL. Fabric OS Message Reference 865 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 888
event is occurring or has failed. The message can be one of the following: • Init failed. Time Service exiting - Initialization error, but the time server exits. • Synchronizing time of day clock - Usually logged during temporary operational issues when the clock goes out of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 889
Recommended Action No action is required. TS-1008 5 Fabric OS Message Reference 867 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 890
5 UCST-1003 UCST Messages UCST-1003 Message Duplicate Path to Domain , Output Port = , PDB pointer = 0x. Message Type LOG Severity INFO Probable Cause Indicates that duplicate paths were reported to the specified domain from the specified output port. The PDB - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 891
UCST-1021 5 UCST-1021 Message In-order delivery option has been enabled. Message Type AUDIT | LOG Class CFG Severity INFO Probable Cause Indicates that in-order delivery (IOD) option has been enabled on the switch. This option guarantees in-order delivery of frames during fabric topology - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 892
5 UCST-1024 UCST-1024 Message Dynamic Load Sharing option has been disabled. Message Type AUDIT | LOG Class CFG Severity INFO Probable Cause Indicates that Dynamic Load Sharing (DLS) option has been disabled on the switch. Recommended Action No action is required. UCST-1026 Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 893
configuration are incompatible. Recommended Action Clear all TI zones and then create a valid TI zone for your fabric configuration. Refer to the Fabric OS Administrator's Guide for more information on TI zoning. Fabric OS Message Reference 871 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 894
5 VDR-2001 VDR Messages VDR-2001 Message . Message Type LOG Severity WARNING Probable Cause Indicates that the Field-Programmable Gate Array (FPGA) parity error threshold exceeded. Recommended Action Power cycle the switch. 872 Fabric OS Message Reference 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 895
VS-1001 5 VS Messages VS-1001 Message No virtual PWWN assignment for the device , port or (AG port ). Message Type LOG Severity INFO Probable Cause Indicates that the device with the virtual Port World Wide Name (PWWN) feature enabled - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 896
was corrupted or accidently removed. Recommended Action Creating a new default configuration file. Execute the configDownload command to download any of OS version. No action is required. VS-1006 Message Virtualization services failed to initialize due to lack of enough memory. Message Type - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 897
daemon (vsd) startup because vsd has failed to register with Fabric OS State Synchronization (FSS). Recommended Action No action is required. VS-1008 Message Virtualization services failed to create timer. Message Type LOG Severity INFO Probable Cause Indicates failure in the virtualization - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 898
5 WEBD-1001 WEBD Messages WEBD-1001 Message Missing or Invalid Certificate file -- HTTPS is configured but could not be started. Message Type LOG Severity WARNING Probable Cause Indicates the Secure Sockets Layer (SSL) certificate file is either invalid or absent. Recommended Action Install - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 899
WEBD-1005 5 WEBD-1005 Message HTTP server and weblinker process will be restarted for logfile truncation. Message Type LOG Severity WARNING Probable Cause Indicates the size of the Hypertext Transfer Protocol (HTTP) log file exceeded the maximum limit. Recommended Action No action is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 900
Probable Cause Indicates a rare error condition in which the built-in recovery process has failed to restore Hypertext Transfer Protocol (HTTP) services. The problem often results from invalid configuration of Secure Sockets Layer (SSL) certificates, but there can be more than one reason for such - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 901
SCSI write or read operation. Recommended Action If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance. XTUN-1001 Message FCIP Tunnel Memory allocation failed tracker - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 902
been aborted by the initiator. Recommended Action If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance. XTUN-1005 Message FCP emulation for Tunnel/Initiator/Target/LUN:// - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 903
, but the frame was dropped due to an invalid receive length. This error occurs only on faulty hardware. Recommended Action Contact your vendor's customer support for assistance. XTUN-1996 Message FTRACE buffer on slot DP has - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 904
event has been detected. Recommended Action If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance. XTUN-1998 Message FTRACE buffer has been cleared. Message Type LOG Severity INFO Probable Cause - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 905
XTUN-2000 5 XTUN-2000 Message FCIP Tunnel UP. Message Type LOG Severity INFO Probable Cause Indicates that the specified Fibre Channel over IP (FCIP) tunnel is up. Recommended Action No action is required. XTUN-2001 Message FCIP Tunnel - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 906
FCIP Tunnel -Pri QoS UP. Message Type LOG Severity INFO Probable Cause Indicates that the specified quality of service (QoS) for this tunnel is up. This applies to the data classes only. When the F-Class comes online, the tunnel itself is marked as - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 907
XTUN-2007 5 XTUN-2007 Message FCIP Tunnel Circuit CREATED (). Message Type LOG Severity INFO Probable Cause Indicates that the specified circuit has been successfully created. Recommended Action No action is required. XTUN-2008 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 908
5 XTUN-2011 Recommended Action No action is required. XTUN-2011 Message FIPS: . Message Type LOG Severity INFO Probable Cause Indicates that the status of the module FIPS compliance has changed. Recommended Action No action is required. XTUN-2020 Message FCIP Tunnel - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 909
XTUN-2022 5 XTUN-2022 Message FCIP Tunnel MODIFIED (). Message Type LOG Severity INFO Probable Cause Indicates that the specified Fibre Channel over IP (FCIP) tunnel has been administratively modified. Recommended Action No action is required. XTUN-2023 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 910
5 XTUN-2025 XTUN-2025 Message FCIP Tunnel Circuit MODATTR (). Message Type LOG Severity INFO Probable Cause Indicates that the attribute is modified. In most cases, the attribute value is modified within the specified - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 911
the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Reboot the system at the next maintenance window. If the problem persists, replace the blade. Fabric OS Message Reference 889 53-1002749-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 912
ERROR Probable Cause Indicates a memory allocation failure in the software. Recommended Action Restart the system at the next maintenance window. If the problem persists, replace the control processor (CP) blade. ZEUS-1015 Message Port re-initialized due to Link Reset failure on internal Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 913
. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. ZEUS-1028 Message Detected excessive Link resets on the port in a second. Slot , Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 914
(CAM) entries before the filter setup. Recommended Action If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. ZONE-1003 Message zone() contains ( - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 915
error when adding CAM entries before the filter setup. Recommended Action Avoid this problem in the following ways: • Avoid having too many hosts zoned with a configuration is enabled on the switch, it will not be supported. Recommended Action Edit the zone database to remove the QuickLoop - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 916
string>\". Message Type LOG Severity ERROR Probable Cause Indicates that reliable commit service (RCS) had a transmit error. RCS is a protocol used to there is any outstanding transaction running on the local switches. If the problem persists, execute the supportFtp command (as needed) to set up - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 917
on the other side of the port is busy. Recommended Action If the problem persists, execute the supportFtp command (as needed) to set up automatic transfers; then execute the supportSave command and contact your switch service provider. ZONE-1024 Message . Message Type LOG - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 918
5 ZONE-1026 ZONE-1026 Message port Out of CAM entries. Message Type LOG Severity INFO Probable Cause Indicates that the total number of entries of S_ID CAM is above the limit while creating or adding a zone group. The maximum number of CAM entries allowed depends on the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 919
Commit zone DB larger than supported - the zoned core file directory. Recommended Action If the problem persists, execute the supportFtp command (as needed) to then execute the supportSave command and contact your switch service provider. ZONE-1034 Message A new zone database file - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 920
5 ZONE-1036 ZONE-1036 Message Unable to create : error message . Message Type LOG Severity ERROR Probable Cause Indicates that the Fabric OS cannot create the zone configuration file. Typically, the zone configuration is too large for the memory - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 921
ZONE-1039 5 ZONE-1039 Message Unable to read contents of : error message . Message Type LOG Severity ERROR Probable Cause Indicates that the Fabric OS cannot read the zone configuration file. Typically, the zone configuration is too large for the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 922
planned, no action is required. If the event was not planned, take appropriate action as defined by your enterprise security policy. ZONE-1045 Message The Default Zone access mode is already set to No Access. Message Type LOG Severity INFO Probable Cause Indicates that the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 923
Zone access mode is already set to All Access. Message Type LOG Severity INFO Probable Cause Indicates that the Default Zone access mode is already set to All Access. Recommended Action No action is required. ZONE-1048 Message ZONE ACA is rejected on the standby. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 924
defined. Recommended Action Remove frame redirection zones or set the Default Zone access mode to No Access using the defzone --noaccess command of higher port index>, Index ) is not supported. Message Type LOG Severity WARNING Probable Cause Indicates that an unsupported - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 925
ZONE-1059 5 ZONE-1059 Message Unexpected TI routing behavior or a potentially unroutable TI configuration has been detected on local domain . Message Type LOG Severity WARNING Probable Cause Indicates that the current fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 926
5 ZONE-1062 ZONE-1062 Message Defined and Effective zone configurations are inconsistent. Message Type LOG Severity WARNING Probable Cause Indicates that the defined and effective configurations are different. Recommended Action Execute the cfgEnable command to make both the configurations - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 927
ZONE-3003 5 ZONE-3003 Message Event: , Status: success, Info: \"\" deleted. Message Type AUDIT Class ZONE Severity INFO Probable Cause Indicates that the specified zone object has been deleted. The zone object type variable can be an alias, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 928
5 ZONE-3006 Recommended Action Verify that the event was planned. If the event was planned, no action is required. If the event was not planned, take appropriate action as defined by your enterprise security policy. ZONE-3006 Message Event: , Status: success, Info: Current zone - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 929
ZONE-3009 5 Recommended Action Verify that the event was planned. If the event was planned, no action is required. If the event was not planned, take appropriate action as defined by your enterprise security policy. ZONE-3009 Message Event: , Status: success, Info: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 930
5 ZONE-3012 ZONE-3012 Message Event: , Status: success, Info: Zone object \"\" renamed to \"\". Message Type AUDIT Class ZONE Severity INFO Probable Cause Indicates that the specified zone object has been renamed. Recommended Action Verify - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 931
ZONE-3015 5 ZONE-3015 Message Event: , Status: success, Info: AD configurations applied. Message Type AUDIT Class FABRIC Severity INFO Probable Cause Indicates that the saved Admin Domain (AD) configurations are enforced. Recommended Action Verify the event was planned. If the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 932
5 ZONE-3018 ZONE-3018 Message Event: , Status: success, Info: has been deactivated. Message Type AUDIT Class FABRIC Severity INFO Probable Cause Indicates that the specified Admin Domain (AD) object has been deactivated. Recommended Action Verify - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 933
ZONE-3021 5 ZONE-3021 Message Event: , Status: success, Info: AD object \"\" renamed to \"\". Message Type AUDIT Class FABRIC Severity INFO Probable Cause Indicates that the specified Admin Domain (AD) has been renamed. Recommended Action - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS Message Reference - Page 934
5 ZONE-3024 ZONE-3024 Message Command: , Status: success, Info: executed. . Message Type AUDIT Class FABRIC Severity INFO Probable Cause Indicates that the ad --transabort command has completed successfully in the specified Admin Domain (AD). Recommended Action Verify
53-1002749-01
14 December 2012
®
Fabric OS
Message Reference
Supporting Fabric OS v7.1.0