Dell PowerConnect M8428-k Getting Started Guide

Dell PowerConnect M8428-k Manual

Dell PowerConnect M8428-k manual content summary:

  • Dell PowerConnect M8428-k | Getting Started Guide - Page 1
    Dell™ PowerEdge™ M1000e, M910, M905, M805, M710HD, M710, M610x, M610, M605, and M600 Getting Started With Your System Guide de mise en route Primeiros passos com o sistema Procedimientos iniciales con el sistema
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 2
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 3
    Dell™ PowerEdge™ M1000e, M910, M905, M805, M710HD, M710, M610x, M610, M605, and M600 Getting Started With Your System Model BMX01, HHB Series, FHB Series
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 4
    . CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 5
    Installation and Configuration WARNING: Before performing the following procedure, review the safety instructions that came with the system. system in the rack following the safety instructions and the rack installation instructions provided with your enclosure. Getting Started With Your System 3
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 6
    the CMC and KVM Modules Connect the serial cable and network cable(s) from the management system to the CMC module. If a second, optional CMC module is installed, connect it as well. Connect the keyboard, mouse, and monitor to the optional iKVM module. 4 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 7
    : Do not plug the power cables directly into a power outlet; you must use a PDU. For optimal system functionality, a minimum of three power supplies are required. Getting Started With Your System 5
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 8
    turn on your system. Turning On the Blades Press the power button on each blade, or power on the blades using the systems management software. 6 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 9
    and configuration documentation for your operating system. Be sure the operating system is installed before installing hardware or software not purchased with the system. Supported Operating Systems 2008 (x64) Edition M710HD M910 M905 M805 M710 M610 M610x M605 Getting Started With Your System 7
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 10
    and WS (version 4.0) Update 5 (x86) Red Hat Enterprise Linux AS, ES, and WS (version 4.0) Update 5 (x86_64) Red Hat Enterprise Linux AS and ES (version 4.7) (x86) Red Hat Enterprise Linux AS and ES (version 4.7) (x86_64) M710HD M910 M905 M805 M710 M610 M610x M605 8 Getting Started With Your
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 11
    1 VMware ESX version 3.5 VMware ESX version 4.0 Update 1 VMware ESXi version 4.0 Update 1 -Supported M710HD M910 M905 M805 M710 M610 M610x M605 NOTE: For the latest information on supported operating systems for all PowerEdge systems, see dell.com/ossupport. Getting Started With Your System 9
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 12
    in this guide or if the system does not perform as expected, see your Hardware Owner's Manual. Dell™ offers comprehensive hardware training and certification. See www.dell.com/training for more information. This service may not be offered in all locations. 10 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 13
    DIMMs (UDIMMs) or 800- or 1066-MHz DDR3 quad-ranked registered DIMMs (RDIMMs) or unbuffered DIMMs (UDIMMs) FBD memory modules, rated for 677-MHz operation Getting Started With Your System 11
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 14
    memory modules) 4 GB One 1-GB memory module (one-processor systems) or two 1-GB memory modules (two-processor systems) 1 GB (two 512-MB memory modules) 12 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 15
    hard-disk drives support through PERC H200 embedded storage controller. or Up to two 2.5-inch SSD hard-disk drives support through PERC H200 embedded storage controller. Up to four 2.5-inch SAS hard-disk drives support through value RAID or performance RAID storage card. Getting Started With Your
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 16
    a blade. NOTE: Hot-plug operation is supported if an optional RAID controller card is installed. Connectors External USB PowerEdge M910, M805, M905, M710 PowerEdge M710HD, M610x, M610, M605, M600 Three 4-pin, USB 2.0 compliant Two 4-pin, USB 2.0 compliant 14 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 17
    mezzanine cards. Up to two PCIe Gen 2 x8 mezzanine card slots, supporting dual-port and quad-port Gb Ethernet, 10 Gb Ethernet, FC8 or FC4 width), supporting dual-port Gb Ethernet, 10 Gb Ethernet, FC8 or FC4 Fibre Channel, or 4x DDR Infiniband mezzanine cards. Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 18
    cards. PowerEdge M605, M600 Up to two PCIe x8 mezzanine card slots, supporting dual-port Gb Ethernet, 10 Gb Ethernet, FC8 or FC4 Fibre Channel, Height Width Depth Weight (maximum configuration) 38.5cm (15.2 in) 5 cm (2 in) 48.6 cm (19.2 in) 13.1 kg (29 lb) 16 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 19
    configuration) Battery NVRAM backup battery 38.5cm (15.2 in) 5 cm (2 in) 48.6 cm (19.2 in) 11.1 kg (24.5 lb) 18.9 cm (7.4 in) 5 cm (2 in) 48.6 cm (19.2 in) 7.4 kg (16.3 lb) 18.9 cm (7.4 in) 5 cm (2 in) 48.6 cm (19.2 in) 5.2-6.4 kg (11.5-14.0 lb) CR 2032 3.0-V lithium coin cell Getting Started
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 20
    System Enclosure Specifications Physical Height Width Depth Weight (maximum configuration) Weight (empty) 44.0 cm (17.3 in) 44.7 cm (17.6 in) 75.5 cm ( Two 4-pin, USB 2.0-compliant connectors for keyboard and mouse support ACI port RJ-45 Video 15-pin VGA 18 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 21
    integrated Ethernet remote access controller). Gb port connects to the external management network. STK port allows CMCs in adjacent enclosures to be daisy chained. mouse support Video 15-pin VGA LCD Panel Features Four cursor control keys, one select key, LCD screen Getting Started With
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 22
    modules and pass-through modules supported on your enclosure, see the Dell PowerEdge M1000e Systems Configuration Guide at support.dell.com/manuals. Environmental NOTE: For additional information (-50 to 10,000 ft) Storage -16 to 10,600 m (-50 to 35,000 ft) 20 Getting Started With Your System
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 23
    Systèmes Dell™ PowerEdge™ M1000e, M910, M905, M805, M710HD, M710, M610x, M610, M605 et M600 Guide de mise en route Modèle BMX01, série HHB, série FHB
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 24
    riel ou de perte de données en cas de non-respect des instructions. AVERTISSEMENT : Un AVERTISSEMENT indique un risque d'endommagement du matériel, entités se réclamant de ces marques et de ces noms ou de leurs produits. Dell Inc. dénie tout intérêt propriétaire vis-à-vis des marques et des noms de
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 25
    fournies avec le système. Cette section décrit les étapes à exécuter lors de la configuration initiale du système. Déballage du système Sortez le système de son emballage et identifiez de sécurité et les instructions d'installation du rack fournies avec votre châssis. Guide de mise en route 23
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 26
    un second module CMC en option est installé, connectez-le également. Connectez le clavier, la souris et le moniteur au module iKVM en option. 24 Guide de mise en route
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 27
    de courant. Il est impératif d'utiliser une unité de distribution d'alimentation. Pour un fonctionnement optimal du système, utilisez au moins trois blocs d'alimentation. Guide de mise en route 25
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 28
    tension des serveurs lames Mettez chaque serveur lame sous tension en appuyant sur son bouton d'alimentation ou en utilisant le logiciel Systems Management Software. 26 Guide de mise en route
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 29
    ère installation du système d'exploitation, consultez la documentation relative à l'installation et à la configuration du système d'exploitation. Veillez à installer le système d'exploitation avant tout élément mat x64) avec SP2 M710HD M910 M905 M805 M710 M610 M610x M605 Guide de mise en route 27
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 30
    Enterprise Linux AS et ES (version 4.7) (x86_64) Red Hat Enterprise Linux AS et ES (version 4.8) (x86) M710HD M910 M905 M805 M710 M610 M610x M605 28 Guide de mise en route
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 31
    M610x M605 REMARQUE : Pour obtenir les informations les plus récentes sur les systèmes d'exploitation pris en charge pour tous les systèmes PowerEdge, consultez dell.com/ossupport. Guide de mise en route 29
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 32
    Guide de configuration fournit des informations sur la configuration du châssis du système et des serveurs lames. • Le Guide instructions d'installation ou de remplacement des composants du système. • La documentation relative à l'application de gestion de systèmes Dell site support.dell.com/manuals
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 33
    RDIMM (à registres) ou UDIMM (sans tampon) DDR3 à quadruple rangée de connexions, cadencées à 800 ou 1066 MHz Barrettes de mémoire FBD, cadencées à 677 MHz Guide de mise en route 31
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 34
    1 Go (systèmes à processeur simple) ou deux barrettes de mémoire de 1 Go (systèmes à processeurs doubles) 1 Go (deux barrettes de mémoire de 512 Mo) 32 Guide de mise en route
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 35
    intégré PERC H200. Prise en charge d'un ou de deux disques durs SAS 2,5 pouces via valeur RAID ou adaptateur de stockage RAID haute performance. Guide de mise en route 33
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 36
    serveur lame. REMARQUE : L'ajout et le retrait à chaud des disques sont pris en charge si une carte contrôleur RAID en option est installée. 34 Guide de mise en route
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 37
    interne pour clé USB. Solution d'extension PCIe PowerEdge M610x Prend en charge deux cartes à largeur simple ou une carte à double largeur PCIe standard pleine longueur. Guide de mise en route 35
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 38
    PCIe x8, prenant en charge des cartes mezzanine Gigabit Ethernet à double port, Ethernet 10 Go, Fibre Channel FC8 ou FC4 ou Infiniband DDR 4x. 36 Guide de mise en route
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 39
    maximale) PowerEdge M905, M805, M710, M610x Hauteur Largeur Profondeur Poids (configuration maximale) 38,5 cm (15,2 pouces) 5 cm (2 pouces) 48,6 cm (19,2 pouces) 13,1 kg (29 livres) 38,5 cm (15,2 pouces) 5 cm (2 pouces) 48,6 cm (19,2 pouces) 11,1 kg (24,5 livres) Guide de mise en route 37
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 40
    M710HD Hauteur Largeur Profondeur Poids (configuration maximale) PowerEdge M605, M600 Hauteur Largeur Profondeur Poids (configuration maximale) 18,9 cm (7,4 (3 V) Spécifications du châssis Physique Hauteur Largeur Profondeur Poids (configuration maximale) Poids (à vide) 44 cm (17,3 pouces) 44,7
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 41
    des châssis adjacents. Série Un connecteur DTE à 9 broches, compatible 16550 Vidéo Un connecteur VGA à 15 broches Batterie Pile bouton au lithium-ion CR 2032 (3 V) Guide de mise en route 39
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 42
    pris en charge sur votre châssis, consultez le guide Dell PowerEdge M1000e Systems Configuration Guide (Guide de configuration des systèmes Dell PowerEdge M1000e), à l'adresse suivante : support.dell.com/manuals. Environnement REMARQUE : Pour plus d'informations concernant les mesures
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 43
    de chaque côté du système) Altitude En fonctionnement De -16 à 3 048 m (de -50 à 10 000 pieds) Stockage De -16 à 10 600 m (-50 à 35 000 pieds) Guide de mise en route 41
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 44
    42 Guide de mise en route
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 45
    Sistemas Dell™ PowerEdge™ M1000e, M910, M905, M805, M710HD, M710, M610x, M610 M605 e M600 Primeiros passos com o sistema Modelo BMX01, série HHB, série FHB
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 46
    utilizar melhor o computador. AVISO: um AVISO indica um potencial de danos ao hardware ou a perda de dados se as instruções não forem seguidas. ADVERTÊNCIA ser usados neste documento como referência às entidades que reivindicam essas marcas e nomes ou a seus produtos. A Dell Inc. renuncia ao direito
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 47
    Instalação e configuração ADVERTÊNCIA: antes de executar este procedimento, siga as instruções de segurança fornecidas com o sistema. Esta seção descreve as etapas necessárias para a configuração do sistema pela primeira vez. Remover o sistema da embalagem Remova o sistema da embalagem e identifique
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 48
    Como instalar as lâminas Deslize os módulos da caixa da esquerda para a direita, começando da parte superior. Quando a lâmina estiver instalada com segurança, a alça retorna para a posição fechada. Como conectar os módulos CMC e KVM Conecte os cabos serial e de rede do sistema de gerenciamento ao
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 49
    Como conectar o sistema à energia Conecte os cabos de alimentação do sistema às fontes de alimentação. AVISO: para evitar que os cabos de alimentação se desconectem acidentalmente, use o clipe plástico de cada fonte de alimentação para prender o cabo à fonte e a tira de velcro para prender o cabo à
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 50
    Como ligar o sistema Pressione o botão liga/desliga da caixa. A luz indicadora de energia deverá se acender. NOTA: assim que você tiver conectado o sistema às fontes de alimentação, poderá haver uma demora mínima até que você possa ligar o sistema. Como ligar as lâminas Pressione o botão liga/
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 51
    de instalação e configuração do sistema operacional. Certifique-se de que o sistema operacional esteja instalado antes de instalar qualquer hardware ou software que não tenha sido adquirido com o sistema. Sistemas operacionais compatíveis Sistema operacional Citrix® XenServer 5.5 Citrix® XenServer
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 52
    Sistema operacional Microsoft Windows Server 2008 R2, edições Standard, Enterprise e Datacenter (x64) Microsoft Windows Server 2003, edições Standard e Enterprise Microsoft Windows Server 2003, edição Web Microsoft Windows Server 2003, edições Standard Enterprise e Web com SP1 e posterior Microsoft
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 53
    M710 M610 M610x M605 NOTA: para obter as informações mais recentes sobre os sistemas operacionais compatíveis com todos os sistemas PowerEdge, consulte o site dell.com/ossupport. Primeiros passos com o sistema 51
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 54
    ça fornecidas com o sistema. • O Configuration Guide (Guia de configuração) fornece informações sobre ções disponíveis no site support.dell.com/manuals (em inglês) e leia Manual do proprietário de hardware. A Dell™ oferece treinamento abrangente e certificação de hardware. Consulte o site www.dell
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 55
    Especificações técnicas Especificações da lâmina Processador Tipo de processador PowerEdge M910 PowerEdge M905 PowerEdge M805 PowerEdge M710HD, M710, M610, M610x PowerEdge M605 PowerEdge M600 Dois ou quatro processadores Intel® Xeon® da série 7000 (processadores de até oito núcleos) Quatro
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 56
    Memória (continuação) PowerEdge M710, M610, M610x PowerEdge M600 Soquetes de módulos de memória PowerEdge M910 PowerEdge M905 PowerEdge M805 PowerEdge M710HD PowerEdge M710 PowerEdge M610x, M610 PowerEdge M605, M600 Capacidades dos módulos de memória PowerEdge M910 PowerEdge M905, M805, PowerEdge
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 57
    Memória (continuação) Mínimo de RAM PowerEdge M910 PowerEdge M905 PowerEdge M805 PowerEdge M710D PowerEdge M710, M610x, M610 PowerEdge M600, M605 Máximo de RAM PowerEdge M910 PowerEdge M905 PowerEdge M805 PowerEdge M710HD PowerEdge M710 PowerEdge M610, M610x PowerEdge M600, M605 4 GB 8 GB (oito mó
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 58
    Unidades Unidades de disco rígido PowerEdge M910 PowerEdge M905, M805 PowerEdge M710HD PowerEdge M710 PowerEdge M600, M610x, M610 Até duas unidades de disco rígido SAS de 2,5 pol, suporte via cartão de armazenamento RAID de desempenho ou RAID de valor. ou Até duas unidades de disco rígido de SSD de
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 59
    Unidades (continuação) PowerEdge M605 Suporte para até duas unidades de disco rígido SATA via cartão de armazenamento RAID de desempenho ou RAID de valor. ou Suporte para até duas unidades de disco rígido de SSD via cartão de armazenamento não-RAID. ou Suporte para até duas unidades de disco rígido
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 60
    Conectores (continuação) Internos Módulo SD (Secure Digital) interno (PowerEdge M910, M805, M905, M710HD, M710, M610x, M610) Módulo vFlash SD (Secure Digital) interno (PowerEdge M910, M710HD, M710, M610x, M610) Chave USB (PowerEdge M910, M710HD, M710, M610x, M610) Um slot de cartão de memória flash
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 61
    Placas para mezanino (continuação) PowerEdge M710 Até quatro slots de placa PCIe Gen 2 (três trilhas de x8 e uma trilha de x4 de largura), com suporte a placas Gb Ethernet de dois portas, 10 Gb Ethernet, FC8 ou FC4 Fibre Channel ou 4x DDR Infiniband para mezanino. PowerEdge M610x, M610 Até dois
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 62
    Características físicas PowerEdge M910 Altura Largura Profundidade Peso (com a configuração máxima) PowerEdge M905, M805, M710, M610x Altura Largura Profundidade Peso (com a configuração máxima) PowerEdge M710HD Altura Largura Profundidade Peso (com a configuração máxima) PowerEdge M605, M600 Altura
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 63
    Especificações da caixa do sistema Características físicas Altura Largura Profundidade Peso (com a configuração máxima) Peso (vazio) 44,0 cm (17,3 pol.) 44,7 cm (17,6 pol.) 75,5 cm (29,7 pol.) 178,3 kg (392,2 lb) 44,6 kg (98,1 lb) Módulo da fonte de alimentação Fonte de alimentação CA/CC (por
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 64
    Módulo controlador de gerenciamento do chassi Conectores acessíveis externamente Gerenciamento remoto Duas portas RJ-45 10/100/1000 Mb (para controlador de acesso remoto Ethernet integrado). A porta Gb conecta-se com a rede de gerenciamento externa. A porta STK permite que os CMCs em caixas
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 65
    obter informações sobre os módulos de E/S e de passagem compatíveis com o compartimento, consulte o guia Dell PowerEdge M1000e Systems Configuration Guide no endereço support.dell.com/manuals (em inglês). Ambientais NOTA: para obter informações adicionais sobre os valores ambientais para configura
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 66
    64 Primeiros passos com o sistema
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 67
    Dell™ PowerEdge™ M1000e, M910, M905, M805, M710HD, M710, M610x, M610, M605 y M600 Procedimientos iniciales con el sistema Modelo BMX01, serie HHB, serie FHB
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 68
    PRECAUCIÓN: Un mensaje de PRECAUCIÓN indica la posibilidad de daños en el hardware o la pérdida de datos si no se siguen las instrucciones. AVISO: Un para hacer referencia a las entidades que los poseen o a sus productos. Dell Inc. renuncia a cualquier interés sobre la propiedad de marcas y nombres
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 69
    Instalación y configuración AVISO: Antes de realizar el procedimiento siguiente, revise las instrucciones de seguridad incluidas con el sistema. En esta sección se describen los pasos necesarios para configurar el sistema por primera vez. Desembalaje del sistema Desembale el sistema e identifique
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 70
    Instalación de los módulos de alta densidad Empezando por la parte superior, inserte los módulos en el alojamiento de izquierda a derecha. Una vez que el módulo de alta densidad esté bien instalado, el asa volverá a la posición de cierre. Conexión de los módulos CMC y KVM Conecte el cable serie y
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 71
    Conexión del sistema a la alimentación Conecte los cables de alimentación del sistema a las fuentes de alimentación. PRECAUCIÓN: Para evitar que los cables de alimentación se desconecten accidentalmente, utilice el gancho de plástico de cada fuente de alimentación para fijar el cable a la fuente de
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 72
    Encendido del sistema Presione el botón de encendido del alojamiento. El indicador de alimentación debería encenderse. NOTA: Después de conectar el sistema a las fuentes de alimentación, puede producirse una pequeña demora antes de poder encender el sistema. Encendido de los módulos de alta
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 73
    ón de instalación y configuración del sistema operativo. Asegúrese de que el sistema operativo esté instalado antes de instalar hardware o software no adquiridos con el sistema. Sistemas operativos admitidos Sistema operativo Citrix® XenServer 5.5 Citrix® XenServer 5.6 Microsoft® Windows Server
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 74
    Sistema operativo Microsoft Windows Web Server 2008 (x64) Edition con SP2 Microsoft Windows Server 2008 R2 Standard, Enterprise, y Datacenter (x64) Edition Microsoft Windows Server 2003 Standard y Enterprise Edition Microsoft Windows Server 2003 Web Edition Microsoft Windows Server 2003 Standard
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 75
    M710HD M910 M905 M805 M710 M610 M610x M605 NOTA: Para obtener la información más reciente sobre los sistemas operativos admitidos para todos los sistemas PowerEdge, visite dell.com/ossupport. Procedimientos iniciales con el sistema 73
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 76
    cómo instalar el sistema en un rack. • En el Manual del propietario del hardware se proporciona información sobre las características del sistema y se de administración de sistemas. NOTA: Compruebe si hay actualizaciones en support.dell.com/manuals y, si las hay, léalas antes de proceder a la
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 77
    Información de la NOM (sólo para México) La información que se proporciona a continuación aparece en el dispositivo descrito en este documento, en cumplimiento de los requisitos de la Norma Oficial Mexicana (NOM): Importador: Número de modelo: Voltaje de alimentación: Frecuencia: Consumo eléctrico:
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 78
    Especificaciones técnicas Especificaciones del módulo de alta densidad Procesador Tipo de procesador PowerEdge M910 PowerEdge M905 PowerEdge M805 PowerEdge M710HD, M710, M610 y M610x PowerEdge M605 PowerEdge M600 Dos o cuatro procesadores Intel® Xeon® serie 7000 (procesadores de hasta ocho nú
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 79
    Memoria (continuación) Zócalos de módulo de memoria PowerEdge M910 PowerEdge M905 PowerEdge M805 PowerEdge M710HD PowerEdge M710 PowerEdge M610x, M610 PowerEdge M605 y M600 Capacidades del módulo de memoria PowerEdge M910 PowerEdge M905 y M805 PowerEdge M710HD PowerEdge M710, M610x, M610 PowerEdge
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 80
    Memoria (continuación) RAM máxima PowerEdge M910 PowerEdge M905 PowerEdge M805 PowerEdge M710HD PowerEdge M710 PowerEdge M610, M610x PowerEdge M600 y M605 512 GB 192 GB 128 GB 144 GB (DIMM duales) o 192 GB (DIMM cuádruples) 192 GB (12 RDIMM de 16 GB) 36 GB (18 UDIMM de 2 GB) 192 GB (12 RDIMM de 16
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 81
    Unidades (continuación) PowerEdge M710 PowerEdge M600, M610x, M610 PowerEdge M605 Hasta cuatro unidades de disco duro SAS de 2,5 pulgadas. Compatibilidad mediante tarjeta de almacenamiento RAID básica o RAID de alto rendimiento. Compatibilidad con una unidad de disco duro SATA de 2,5 pulgadas
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 82
    Conectores Externos USB PowerEdge M910, M805, M905, M710 Tres de 4 patas compatibles con USB 2.0 PowerEdge M710HD, M610x, M610, M605, M600 Dos de 4 patas compatibles con USB 2.0 Internos Módulo Secure Digital (SD) interno (PowerEdge M910, M805, M905, M710HD, M710, M610x, M610) Una ranura
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 83
    Tarjetas intermedias (continuación) PowerEdge M710HD Hasta dos ranuras para tarjeta intermedia PCIe Gen 2 x8, que admiten tarjetas intermedias Ethernet Gb, 10Gb Ethernet, Fibre Channel FC8 o FC4, o Infiniband DDR 4x de dos y cuatro puertos. PowerEdge M710 Hasta cuatro ranuras para tarjeta
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 84
    Características físicas PowerEdge M910 Altura Anchura Profundidad Peso (configuración máxima) PowerEdge M905, M805, M710, M610x Altura Anchura Profundidad Peso (configuración máxima) PowerEdge M710HD Altura Anchura Profundidad Peso (configuración máxima) PowerEdge M605 y M600 Altura Anchura
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 85
    Especificaciones del alojamiento del sistema Características físicas Altura 44,0 cm Anchura 44,7 cm Profundidad 75,5 cm Peso (configuración máxima) 178,3 kg Peso (vacío) 44,6 kg Módulo de fuente de alimentación Fuente de alimentación de CA/CC (por fuente de alimentación) Potencia 2 360
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 86
    Módulo de controladora de administración del chasis Conectores de acceso externo Administración remota Dos RJ-45 10/100/1000 Mb dedicados (para una controladora de acceso remoto Ethernet integrada). El puerto Gb se conecta a la red de administración externa. El puerto STK permite la conexión
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 87
    dulos de paso a través que se admiten en su alojamiento, consulte el documento Sistemas Dell PowerEdge M1000e - Guía de configuración en support.dell.com/manuals. Especificaciones ambientales NOTA: Para obtener información adicional sobre medidas ambientales relativas a configuraciones del sistema
  • Dell PowerConnect M8428-k | Getting Started Guide - Page 88
    86 Procedimientos iniciales con el sistema
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Dellâ„¢ PowerEdgeâ„¢
M1000e, M910, M905, M805,
M710HD, M710, M610x, M610,
M605, and M600
Getting Started
With Your System
Guide de mise en route
Primeiros passos com o sistema
Procedimientos iniciales con el sistema