Dell PowerEdge MX840c EMC Technical Specifications
Dell PowerEdge MX840c Manual
 |
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge MX840c manual content summary:
- Dell PowerEdge MX840c | EMC Technical Specifications - Page 1
Dell EMC PowerEdge MX840c Technical Specifications Regulatory Model: E05B Series Regulatory Type: E05B001 July 2020 Rev. A04 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 2
of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be - Dell PowerEdge MX840c | EMC Technical Specifications - Page 3
Chapter 1: Dell EMC PowerEdge MX840c overview 4 Front view of the sled...5 System ID and status LED indicator codes...6 Power button LED...6 Drive indicator codes...7 Inside the sled...7 Locating the Service Tag of the sled...9 System information label...9 Chapter 2: Technical specifications 13 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 4
1 Dell EMC PowerEdge MX840c overview The PowerEdge MX840c is a double-width compute sled and supports: • Up to four Intel Xeon Scalable Processors • Up to 48 view of the sled • Inside the sled • Locating the Service Tag of the sled • System information label 4 Dell EMC PowerEdge MX840c overview - Dell PowerEdge MX840c | EMC Technical Specifications - Page 5
status LED indicator 2. iDRAC Direct (Micro-AB USB) port 4. Release lever 6. Information tag 8. Power button For more information on the drives and ports, see the Technical Specifications section. Dell EMC PowerEdge MX840c overview 5 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 6
. Sled is operating, one or more of the non-standby power supplies are active. Sled is performing powering on sequence and iDRAC is still booting. 6 Dell EMC PowerEdge MX840c overview - Dell PowerEdge MX840c | EMC Technical Specifications - Page 7
. Inside the sled NOTE: Components that are hot swappable have orange touch points and the components that are not hot swappable have blue touch points. Dell EMC PowerEdge MX840c overview 7 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 8
Power connector 9. Mini Mezzanine card (Fabric C1 card) connector 11. IDSDM/BOSS module connector 13. PERC card connector 2. Processor 1 socket 4. Processor 2 socket 6. Rotational guiding hook 8. Mezzanine card (Fabric B1 card) 10. iDRAC card 12. System board 8 Dell EMC PowerEdge MX840c overview - Dell PowerEdge MX840c | EMC Technical Specifications - Page 9
by pulling out the Information Tag. Dell uses this information to route support calls to the appropriate personnel. Figure 7. Information Tag of the sled 1. Information Tag 2. Service Tag System information label Figure 8. PowerEdge MX840c service information Dell EMC PowerEdge MX840c overview 9 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 10
Figure 9. PowerEdge MX840c memory information 10 Dell EMC PowerEdge MX840c overview - Dell PowerEdge MX840c | EMC Technical Specifications - Page 11
Figure 10. PowerEdge MX840c system board connections Figure 11. PowerEdge MX840c BBU module Dell EMC PowerEdge MX840c overview 11 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 12
Figure 12. PowerEdge MX840c PEM removal Figure 13. PowerEdge MX840c mezzanine cards removal Figure 14. PowerEdge MX840c PERC cards removal Figure 15. PowerEdge MX840c iDRAC/IDSDM module and optional internal USB key removal 12 Dell EMC PowerEdge MX840c overview - Dell PowerEdge MX840c | EMC Technical Specifications - Page 13
of the PowerEdge MX840c sled X Y 250.2 mm (9.85 inches) 85.5 mm (3.37 inches) Z (handle closed) 618 mm (24.33 inches) Chassis weight Table 5. Chassis weight Sled 8 x 2.5 inch 6 x 2.5 inch Maximum weight (with all drives/SSDs) 17 kg (37.47 lb) 16.8 kg (37.04 lb) Technical specifications 13 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 14
the Dell EMC PowerEdge MX840c is supported with chipset integration and is enabled through an optional license. The license files are enabled on the sleds through iDRAC. For more information about iDRAC, see the Dell Integrated Remote Access Controller User's Guide at www.dell.com/poweredgemanuals - Dell PowerEdge MX840c | EMC Technical Specifications - Page 15
in slots 0 to 5. NVMe drives are supported in the slots 2 to 5. NOTE: NVMe is not supported in the slots 0 to 1. Quad processor sled NVMe drives are supported in the slots 0 to 5. Ports and connectors specifications USB ports The PowerEdge MX840c sled supports: Technical specifications 15 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 16
: It is recommended to use Dell branded MicroSD cards associated with the IDSDM configured systems. PERC controller cards The PowerEdge MX840c sled supports PERC9/10 solutions. The PERC provides x8 12 Gb SAS, 6 Gb/s SATA x8 PCIe 3.0/2.0 H745P (Internal) Memory: 8 GB 16 Technical specifications - Dell PowerEdge MX840c | EMC Technical Specifications - Page 17
/SAS, 3 Gb/s SATA x8 PCIe 3.0 Mezzanine cards The PowerEdge MX840c sled supports: Table 10. Supported mezzanine cards Type Two x16 PCIe Gen3 for mini mezzanine cards Environmental Datasheet located with the Manuals & Documents on support.dell.com. Table 11. dew point. Technical specifications 17 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 18
. Corrosive dust • Air must be free of corrosive dust. • Residual dust present in the air must have a deliquescent point less than 60% relative humidity. 18 Technical specifications - Dell PowerEdge MX840c | EMC Technical Specifications - Page 19
altitude of 3050 m (10,000 ft). • Low core count processors [Gold 6240Y, 6146, 6144] and higher wattage processors [Thermal Design Power (TDP)>=165 W] are not supported. • Non-Dell qualified peripheral cards and/or peripheral cards greater than 30 W are not supported. Technical specifications 19 - Dell PowerEdge MX840c | EMC Technical Specifications - Page 20
is not supported. Thermal PowerEdge servers have an extensive collection of sensors that automatically track thermal activity, which helps regulate temperature thereby reducing server noise and power consumption. The sensors in the MX840c interact with the chassis management services module which - Dell PowerEdge MX840c | EMC Technical Specifications - Page 21
3 System diagnostics and indicator codes The diagnostic indicators on the system front panel display system status during system startup. Topics: • System ID and status LED indicator codes • Power button LED • Drive indicator codes • System diagnostics System ID and status LED indicator codes The - Dell PowerEdge MX840c | EMC Technical Specifications - Page 22
Table 23. Power button LED Power button LED indicator code Off On Slowly blinking Condition Sled is not operating, regardless of power supply available. Sled is operating, one or more of the non-standby power supplies are active. Sled is performing powering on sequence and iDRAC is still booting. - Dell PowerEdge MX840c | EMC Technical Specifications - Page 23
system diagnostics before contacting Dell for technical assistance. The purpose of running system diagnostics is to test your system hardware without using additional equipment or risking data loss. If you are unable to fix the problem yourself, service and support personnel can use the diagnostics - Dell PowerEdge MX840c | EMC Technical Specifications - Page 24
and click Send Feedback to send your feedback. Receiving automated support with SupportAssist Dell EMC SupportAssist is an optional Dell EMC Services offering that automates technical support for your Dell EMC server, storage, and networking devices. By installing and setting up a SupportAssist - Dell PowerEdge MX840c | EMC Technical Specifications - Page 25
20. Quick Resource Locator for the PowerEdge MX840c Recycling or End-of-Life service information Take back and recycling services are offered for this product in certain countries. If you want to dispose of system components, visit www.dell.com/recyclingworldwide and select the relevant country
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
 |
 |
Dell EMC PowerEdge MX840c
Technical Specifications
Regulatory Model: E05B Series
Regulatory Type: E05B001
July 2020
Rev. A04