Dell PowerEdge T610 Tower-to-Rack Conversion Guide
Dell PowerEdge T610 Manual
 |
View all Dell PowerEdge T610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge T610 manual content summary:
- Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 1
Dell™ PowerEdge™ T610 Systems Tower-to-Rack Conversion Guide - Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 2
. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc. Other - Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 3
peripherals or supporting hardware. CAUTION: Instructions for Rack-Mounted Systems: • Your rack kit has been approved only for the rack cabinet provided. It is your responsibility to ensure that installation of the equipment into any other rack complies with all applicable standards. Dell disclaims - Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 4
panel to the system chassis. See Figure 1-1. 2 Slide the top panel toward the back of the system until the panel hooks clear the chassis slots. 3 Rotate the free side of the panel outward about 15 degrees and pull the panel clear of the system. See Figure 1-1. 4 Tower-to-Rack Conversion Guide - Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 5
Figure 1-1. Removing the Tower Components 1 2 7 6 5 4 3 1 top chassis panel 3 Phillips screw (4) 5 LCD display module 7 optical drive (top or left drive bay) 2 Phillips screw (2) 4 stabilizer foot (4) 6 drive release latch Tower-to-Rack Conversion Guide 5 - Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 6
on the optical drive with the drive bay screw slots. b Insert the optical drive into the drive bay until the release latch locks into place. c Reconnect the power and data cables to the back of the optical drive. 4 Close the system cover. Installing the Rack Ears 1 Align the rack ear screw holes - Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 7
Figure 1-2. Installing the Rack Ears 1 rack ear (2) 1 2 2 Phillips screw (6) Tower-to-Rack Conversion Guide 7 - Dell PowerEdge T610 | Tower-to-Rack Conversion Guide - Page 8
8 Tower-to-Rack Conversion Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Dell™ PowerEdge™
T610 Systems
Tower-to-Rack
Conversion Guide