Dell U2424H UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions
Dell U2424H Manual
 |
View all Dell U2424H manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell U2424H manual content summary:
- Dell U2424H | UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions - Page 1
DELL U2424HB 1 1. Disassembly Procedures S1 Turn off power S2 To remove the stand: Place the monitor on a soft cloth or cushion S4 Pull out CTRL BD - Dell U2424H | UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions - Page 2
S7 Pull out ALS FFC from I/F BD Tear off tape from ALS FFC and panel Tear off ALS FFC from Main SHD DELL U2424HB 2 S10 Press and pull on the lock of connector to disassemble USB FFC from I/F BD Attention: USB FFC may be damaged if you pull - Dell U2424H | UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions - Page 3
DELL U2424HB 3 S12 Pull out USB FFC and USB wire from USB BD S15 Tear off the yellow tape and acetate tape from the panel Disassemble - Dell U2424H | UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions - Page 4
DELL U2424HB 4 S18 Disassemble 2 plastic BOSS from panel S20 Unlock 8 PCBA screws to disassemble I/F BD, SPS BD from Main SHD S19 Disassemble mylar from Main SHD (Screw Torque: 8-9 Kgf) S21 Tear off the tape from I/F BD Remove all cables from I/F BD - Dell U2424H | UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions - Page 5
DELL U2424HB 5 S22 Remove electrolyte capacitors (red mark) from printed circuit boards S22-1 Cut the glue between bulk cap. and PCB with a knife S22-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB - Dell U2424H | UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions - Page 6
DELL U2424HB 6 S22-3 Take out bulk cap. pin solder with soldering iron and absorber S22-4 Lift the bulk cap. up and away from the PCB - Dell U2424H | UltraSharp 24 Monitor - U2424H/U2424H WOST Teardown Instructions - Page 7
DELL U2424HB 7 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
1
DELL U2424HB
1. Disassembly Procedures
S1
Turn off power
S2
To remove the stand:
Place the monitor on a soft cloth or
cushion
Press and hold the stand release button
Lift the stand up and away from the
monitor
S3
Unlock 4 screws on Rear Cover
Use hands or scraper bar to
disassemble Rear Cover from monitor
Notice the disassembly order:
Top Side=>Right/ Left Side=>Bottom Side
(Screw Torque:8-9Kgf)
S4
Pull out CTRL BD FFC from I/F BD and
tear off it from Main SHD to take off
Rear Cover
S5
Tear off a tape from CTRL BD FFC and
Rear Cover
S6
Unlock screw*3 to disassemble CTRL
BD from Rear Cover
(Screw Torque: 1.6-1.8Kgf)