Dell U2719DC UltraSharp Users Guide

Dell U2719DC Manual

Get Dell U2719DC PDF manuals and user guides View all Dell U2719DC manuals
Add to My Manuals
Save this manual to your list of manuals

Dell U2719DC manual content summary:

  • Dell U2719DC | UltraSharp Users Guide - Page 1
    Dell UltraSharp U2419HC/U2719DC Monitor User's Guide Model: U2419HC/U2719DC Regulatory model: U2419HCt/U2719DCt
  • Dell U2719DC | UltraSharp Users Guide - Page 2
    A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property Copyright © 2018-2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
  • Dell U2719DC | UltraSharp Users Guide - Page 3
    Contents About Your Monitor 5 Package Contents 5 Product Features 6 Identifying Parts and Controls 7 Monitor Specifications 10 Plug-and-Play 23 LCD Monitor Quality and Pixel Policy 23 Setting Up the Monitor 24 Attaching the Stand 24 Using the Tilt, Swivel, and Vertical Extension 26
  • Dell U2719DC | UltraSharp Users Guide - Page 4
    Troubleshooting 52 Self-Test 52 Built-in Diagnostics 53 Always On USB Type-C Charging 54 Common Problems 56 Product Specific Problems 57 Appendix 59 Safety Instructions 59 FCC Notices (U.S. only) and Other Regulatory Information 59 Contacting Dell 59 Setting Up Your Monitor 60 Maintenance
  • Dell U2719DC | UltraSharp Users Guide - Page 5
    About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available
  • Dell U2719DC | UltraSharp Users Guide - Page 6
    Setup Guide • Safety,Environmental,and Regulatory Information • Factory Calibration Report Product Features The Dell UltraSharp U2419HC/U2719DC compatible notebook while receiving video signal. • Plug and play capability if supported by your system. • On-Screen Display (OSD) adjustments for ease
  • Dell U2719DC | UltraSharp Users Guide - Page 7
    Identifying Parts and Controls Front view 1 2 Label 1 2 Description Function buttons (For more information, see Operating the Monitor) Power on/off button (with LED indicator) About Your Monitor | 7
  • Dell U2719DC | UltraSharp Users Guide - Page 8
    4 Security lock slot Secures monitor with security cable lock (sold separately). 5 Barcode, serial number, and Service Refer to this label if you need to contact Dell Tag label for technical support. 6 Cable management slot Use to organize cables by placing them through the slot. Side View
  • Dell U2719DC | UltraSharp Users Guide - Page 9
    . To enable MST, refer to instruction on section "Connecting the Monitor for DP MST Function". NOTE: Remove the rubber plug when using DP out connector. Audio line-out port Connect speakers to playback audio coming through USB Type-C or DP audio channels. Only supports 2-channel audio. NOTE: The
  • Dell U2719DC | UltraSharp Users Guide - Page 10
    Monitor Specifications Model U2419HC U2719DC Screen type Active matrix - TFT LCD Active matrix - TFT LCD Panel Type In-plane switching Technology In-plane switching Technology Aspect ratio 16:9 16:9 Viewable
  • Dell U2719DC | UltraSharp Users Guide - Page 11
    8.1 mm (Bottom) 130 mm -5° to 21° 130 mm -5° to 21° Swivel Cable management Dell Display Manager (DDM)Compatibility Security -40° to 40° -40° to 40° Yes Yes Easy DP & USB Type-C playback) 480i, 480p, 576i, 576p, 720p, 1080i, 1080p U2719DC 30 kHz to 90 kHz 56 Hz to 76 Hz 2560 x 1440 at 60 Hz
  • Dell U2719DC | UltraSharp Users Guide - Page 12
    x 1024 VESA, 1280 x 1024 VESA, 1600 x 900 VESA, 1920 x 1080 Horizontal Frequency (kHz) 31.5 31.5 37.5 37.9 46.9 48.4 60.0 67.5 64.0 80.0 60.0 67.5 U2719DC Display Mode 720 x 400 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864
  • Dell U2719DC | UltraSharp Users Guide - Page 13
    60 Hz only. USB-C MST Multi-Stream Transport (MST) Modes U2419HC OSD Dislay Info: Link rate(current) Maximum number of external monitors that can be supported HBR3 HBR2 U2719DC OSD Dislay Info: Link rate(current) 1920 x 1080/60 Hz 2 1 Maximum number of external monitors that can be
  • Dell U2719DC | UltraSharp Users Guide - Page 14
    Electrical Specifications Model Video input signals U2419HC/U2719DC • Digital video signal for each differential line Per differential line at 100 ohm impedance • DP/USB Type-C signal input support Input voltage/ frequency/current Inrush current 100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.8 A (maximum)
  • Dell U2719DC | UltraSharp Users Guide - Page 15
    Non-operating 5 % to 90 % (non-condensing) Altitude Operating Non-operating Thermal dissipation 5,000 m (16,404 ft) (maximum) 12,192 m (40,000 ft) (maximum) U2419HC U2719DC 478.02 BTU/hour (maximum) 59.75 BTU/hour (typical) 546.30 BTU/hour (maximum) 113.36 BTU/hour (typical) About Your Monitor
  • Dell U2719DC | UltraSharp Users Guide - Page 16
    140 W (maximum)** 17.5 W (typical) Less than 0.3 W Less than 0.3 W Power Consumption Pon Total Energy Consumption (TEC) 12.87 W 43.56 kWh U2719DC VESA Modes Normal operation Active-off mode Switch off Horizontal Vertical Video Power Indicator Sync Sync Active Active Active White Inactive
  • Dell U2719DC | UltraSharp Users Guide - Page 17
    any button in the activeoff mode, the following message is displayed: Dell UltraSharp 24/27 Monitor No DP signal from your device. Press press the monitor button again to select the correct input source. U2419HC/U2719DC *Zero power consumption in OFF mode can only be achieved by disconnecting
  • Dell U2719DC | UltraSharp Users Guide - Page 18
    Pin Assignments DP port (in) Pin number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20-pin side of the connected signal cable ML3(n) GND ML3(p) ML2(n) GND ML2(p) ML1(n) GND ML1(p) ML0(n) GND ML0(p) CONFIG1 CONFIG2 AUX CH (p) GND AUX CH (n) Hot Plug Detect Return DP_PWR 18 | About Your
  • Dell U2719DC | UltraSharp Users Guide - Page 19
    DP port (out) Pin number 20-pin side of the connected signal cable 1 ML0(p) 2 GND 3 ML0(n) 4 ML1(p) 5 GND 6 ML1(n) 7 ML2(p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 CONFIG1 14 CONFIG2 15 AUX CH(p) 16 GND 17 AUX CH(n) 18 Hot Plug Detect 19 Return 20 DP_PWR
  • Dell U2719DC | UltraSharp Users Guide - Page 20
    HDMI port Pin number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19-pin side of the connected signal cable TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0TMDS CLOCK+ TMDS CLOCK SHIELD TMDS CLOCKCEC Reserved (N.C.
  • Dell U2719DC | UltraSharp Users Guide - Page 21
    USB Type-C port Pin Signal A1 GND A2 SSTXp1 A3 SSTXn1 A4 VBUS A5 CC1 A6 Dp1 A7 Dn1 A8 SBU1 A9 VBUS A10 SSRXn2 A11 SSRXp2 A12 GND Pin Signal B12 GND B11 SSRXp1 B10 SSRXn1 B9 VBUS B8 SBU2 B7 Dn1 B6 Dp1 B5 CC2 B4 VBUS B3 SSTXn2 B2 SSTXp2 B1 GND About
  • Dell U2719DC | UltraSharp Users Guide - Page 22
    downstream ports. Your computer has the following USB ports: • 4 downstream - 2 at left side, 2 at bottom Power Charging Port - the ports with battery icon supports fast current charging capability if the device is BC 1.2 compatible. NOTE: The monitor's USB ports work only when the monitor is on or
  • Dell U2719DC | UltraSharp Users Guide - Page 23
    unchanging state which are hard to see and do not affect the display quality or usability. For more information on LCD Monitor Pixel Policy, see Dell support site at: www.dell.com/support/monitors. About Your Monitor | 23
  • Dell U2719DC | UltraSharp Users Guide - Page 24
    Setting Up the Monitor Attaching the Stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up.
  • Dell U2719DC | UltraSharp Users Guide - Page 25
    1 Remove the monitor protective cover and place the monitor with its front facing downward on it. 2 Insert the two tabs on the upper part of the stand to the groove on the back of the monitor. 3 Press the stand down till it snaps into its place. Setting Up the Monitor | 25
  • Dell U2719DC | UltraSharp Users Guide - Page 26
    you purchased any other stand, refer to the respective stand setup guide for set up instructions. Tilt, Swivel and Vertical Extension With the stand attached to this monitor. To download the graphics driver, go to www.dell.com/support and see the Download section for Video Drivers for latest driver
  • Dell U2719DC | UltraSharp Users Guide - Page 27
    Settings of your System. NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website working correctly, go to www.dell.com/support and download the latest driver for your graphics card. Setting Up the Monitor | 27
  • Dell U2719DC | UltraSharp Users Guide - Page 28
    begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1 Turn off your computer. NOTE: U2419HC/U2719DC default setting is DP 1.4. A DP 1.1 Graphic card may not display normally. Please refer to "product specific problems - No image when
  • Dell U2719DC | UltraSharp Users Guide - Page 29
    monitor: • Can be used as USB Type-C or DisplayPort 1.4, alternatively. • Supports USB Power Delivery (PD), with profiles up to 65 W. NOTE: Regardless of your laptop, or the remaining power runtime in your battery, the Dell U2419HC/U2719DC monitor is designed to supply power delivery of up to 65 W
  • Dell U2719DC | UltraSharp Users Guide - Page 30
    Transport (MST) function DP in USB Type-C DP out USB Type-C NOTE: The maximum number of supported U2719DC via MST is subjected to the bandwith of the USB-C source. Please refer to "product specific problems -No image when using USB-C MST". NOTE: Remove the rubber plug when using DP out connector
  • Dell U2719DC | UltraSharp Users Guide - Page 31
    the monitor. 3 2 Wall Mounting (Optional) DELL Flat Panel Monitor / Monitor Plano Panel / dell.com/regulatory_compliance XXXXX NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit. Refer to the instructions the wall by following the instructions that comes with the wall
  • Dell U2719DC | UltraSharp Users Guide - Page 32
    Operating the Monitor Turning on the Monitor Press the button to turn on the monitor. Using the Front Panel Controls Use the control buttons at the bottom edge of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the
  • Dell U2719DC | UltraSharp Users Guide - Page 33
    The following table describes the front panel buttons: Front‑Panel Button 1 Description Use this button to choose from a list of preset color modes. Shortcut key: Preset Modes 2 Use this button to choose from a list of Input Source. Shortcut key: Input Source 3 Use this menu button to launch
  • Dell U2719DC | UltraSharp Users Guide - Page 34
    Button Menu + Power Buttons Disable 1. The following message will appear: Dell UltraSharp 24/27 Monitor Are you sure you want to lock the Menu Buttons? To unlock the Buttons, refer to the User's Guide. Yes No U2419HC/U2719DC 2. Select 'Yes' to Lock the buttons, the following table describes
  • Dell U2719DC | UltraSharp Users Guide - Page 35
    Options 4 Description Use this icon to run the built-in diagnostics, see Built-in Diagnostics. Built-in Diagnostics 3. Hold for 4 seconds, Select the following table describes the unlock icons: Options 1 Description Use this icon to unlock OSD menu function. Menu Buttons lock 2 Use this icon
  • Dell U2719DC | UltraSharp Users Guide - Page 36
    Front‑Panel Button Use the buttons on the front of the monitor to adjust the image settings. Front Panel Button 1 1 23 Description Use the Up (increase) and Down (decrease) keys to adjust items in the OSD menu. Up 2 Down Use the OK button to confirm your selection. OK 3 Use the Back button
  • Dell U2719DC | UltraSharp Users Guide - Page 37
    , exit the OSD menu, or wait for the OSD menu to disappear. 1 Press the button to launch the OSD menu and display the main menu. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display Menu Personalize Others 75 % 75 % 2 Press the and buttons to move between options. As you
  • Dell U2719DC | UltraSharp Users Guide - Page 38
    Use this menu to activate Brightness/Contrast adjustment. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color select between different video inputs that are connected to your monitor. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display Menu Personalize
  • Dell U2719DC | UltraSharp Users Guide - Page 39
    available input. Resets your monitor's Input Source settings to the factory defaults. Use the Color menu to adjust the color setting mode. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display Menu Personalize Others Preset Modes Input Color Format Reset Color Standard RGB
  • Dell U2719DC | UltraSharp Users Guide - Page 40
    , Game, Color Temp. or Custom Color from the list. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display Menu with blue tint with slider set at 10,000K. • Custom Color: Allows you to manually adjust the color settings. Press the and buttons to adjust the Red, Green, and Blue
  • Dell U2719DC | UltraSharp Users Guide - Page 41
    is connected to a computer (or DVD player) using the USB Type-C, DP cable. YPbPr: Select this option if your DVD player supports only YPbPr output. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display Menu Personalize Others Preset Modes Input Color Format Reset Color RGB
  • Dell U2719DC | UltraSharp Users Guide - Page 42
    Description Use the Display menu to adjust image. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color will only be done once after Factory Reset or Display Reset. USB-C Prioritization (U2719DC only) High Resolution: High Resolution can match two monitors with 2560 x 1440
  • Dell U2719DC | UltraSharp Users Guide - Page 43
    the settings of the OSD, such as the languages of the OSD, the amount of time the menu remains on screen, and so on. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display Menu Personalize Others Language Rotation Transparency Timer Lock Reset Menu English 20 20 s Disable
  • Dell U2719DC | UltraSharp Users Guide - Page 44
    Icon Menu and Submenus Lock Description Controls user access to adjustments. the buttons are locked. Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display Menu Personalize Others Language Rotation Transparency Timer Lock Reset Menu Menu Buttons Power Button Menu +
  • Dell U2719DC | UltraSharp Users Guide - Page 45
    Icon Menu and Submenus Personalize Description Dell UltraSharp 24/27 Monitor Brightness/Contrast Input Source Color Display firmware revisions. See Always On USB Type-C Charging for troubleshooting. Reset Personalization Restores shortcut keys to factory defaults. Operating the Monitor | 45
  • Dell U2719DC | UltraSharp Users Guide - Page 46
    for best user experience and optimum performance of your monitor. Dell UltraSharp 24/27 Monitor Brightness/Contrast Display Info Input Source DDC/CI On Color LCD Conditioning O Display Firmware Menu Service Tag Personalize Reset Others Others Factory Reset 46 | Operating the
  • Dell U2719DC | UltraSharp Users Guide - Page 47
    Others Others Factory Reset Firmware Firmware version. Service Tag Displays the Service Tag. The Service Tag is a unique alphanumeric identifier that allows Dell to identify the product specifications and access warranty information. NOTE: The Service Tag is also printed on a label located
  • Dell U2719DC | UltraSharp Users Guide - Page 48
    your input timing to 1920x1080, 60Hz or any other monitor listed timing as per the monitor specifications. U2719DC U2419HC Dell UltraSharp 27 Monitor The current input timing is not supported by the monitor display. Please change your input timing to 2560x1440, 60Hz or any other monitor listed
  • Dell U2719DC | UltraSharp Users Guide - Page 49
    in 4 minutes. www.dell.com/support/U2419HC www.dell.com/support/U2719DC or U2419HC/U2719DC Dell UltraSharp 24/27 Monitor No USB Type-C Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/support/U2419HC www.dell.com/support/U2719DC U2419HC/U2719DC Operating the Monitor
  • Dell U2719DC | UltraSharp Users Guide - Page 50
    cable supporting DP alternate mode is connected to the monitor under the following conditions: • When Auto Select for USB-C is set to Prompt for Multiple Inputs. • When the DP cable is connected to the monitor. Dell UltraSharp 24/27 Monitor Switch to USB-C Video Input: Yes No U2419HC/U2719DC When
  • Dell U2719DC | UltraSharp Users Guide - Page 51
    select OSD items of Factory Reset in Other feature, the following message will appear: Dell UltraSharp 27 Monitor Please disconnect any USB storage device to your monitor during the be changed in the Menu. U2419HC/U2719DC See Troubleshooting for more information. Operating the Monitor | 51
  • Dell U2719DC | UltraSharp Users Guide - Page 52
    in 4 minutes. www.dell.com/support/U2419HC www.dell.com/support/U2719DC or Dell UltraSharp 24/27 Monitor U2419HC/U2719DC No USB Type-C Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/support/U2419HC www.dell.com/support/U2719DC U2419HC/U2719DC 4 This box also appears
  • Dell U2719DC | UltraSharp Users Guide - Page 53
    built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in monitor is functioning properly. Check the video card and computer. Troubleshooting | 53
  • Dell U2719DC | UltraSharp Users Guide - Page 54
    ) from Drivers & Downloads section of the Dell Monitor support site: U2419HC: www.dell.com/U2419HC U2719DC: www.dell.com/U2719DC 2 Connect the USB Type-C cable to the Monitor and PC. USB Type-C USB Type-C 3 Run the Monitor Firmware Update Utility.exe to install the program. 54 | Troubleshooting
  • Dell U2719DC | UltraSharp Users Guide - Page 55
    4 Check current firmware revision: click Update to update the firmware. 5 Wait for the firmware to be updated. 6 Click Close once the firmware is updated. Troubleshooting | 55
  • Dell U2719DC | UltraSharp Users Guide - Page 56
    Problems Safety Related Issues Intermittent Problems Dell Monitor Quality and PixelPolicy, see Dell Support site at: www.dell.com/support/monitors. • Reset the monitor to factory settings. • Adjust brightness and contrast controls via OSD. • Do not perform any troubleshooting steps. • Contact Dell
  • Dell U2719DC | UltraSharp Users Guide - Page 57
    , see Power Management Modes). • Alternatively, use a dynamically changing screensaver. Product Specific Problems Problem Screen image is too small Cannot adjust the monitor with the buttons on the front cable again, if necessary. • Reset the computer or video player. Troubleshooting | 57
  • Dell U2719DC | UltraSharp Users Guide - Page 58
    Problem consumption of device is over 65 W. • Ensure that you use only Dell approved adapter or the adapter that comes with the product. • Ensure that latest graphics card driver. • Some DP 1.1a graphics card cannot support DP 1.4 monitors. Go to OSD menu, under Input Source selection Troubleshooting
  • Dell U2719DC | UltraSharp Users Guide - Page 59
    hazards, and/or mechanical hazards. For information on safety instructions, see the Safety, Environmental, and Regulatory Information ( Monitor support content: See www.dell.com/support/monitors. To contact Dell for sales, technical support, or customer service issues: 1 Go to www.dell.com/support.
  • Dell U2719DC | UltraSharp Users Guide - Page 60
    1 Go to www.dell.com/support, enter your service tag, and download the latest driver for your graphics card. 2 After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 (U2419HC)/2560 x 1440 (U2719DC) again. NOTE: If you are unable to set the resolution
  • Dell U2719DC | UltraSharp Users Guide - Page 61
    Non-Dell computer In Windows Vista, Windows to set the resolution to 1920 x 1080 (U2419HC)/2560 x 1440 (U2719DC) again. In Windows 10: 1 Right-click on the desktop and set the resolution to 1920 x 1080 (U2419HC)/2560 x 1440 (U2719DC) again. NOTE: If you are unable to set the recommended resolution
  • Dell U2719DC | UltraSharp Users Guide - Page 62
    the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety Instructions before cleaning the monitor. For best practices, follow these instructions in the list below while unpacking, cleaning, or handling your monitor: • To clean your anti-static
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Model: U2419HC/U2719DC
Regulatory model: U2419HCt/U2719DCt
Dell UltraSharp
U2419HC/U2719DC Monitor
User’s Guide