Dell U2724D UltraSharp 27 Monitor – Teardown Instructions
Dell U2724D Manual
![]() |
View all Dell U2724D manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell U2724D manual content summary:
- Dell U2724D | UltraSharp 27 Monitor – Teardown Instructions - Page 1
DELL U2724DB 1 1. Disassembly Procedures S1 Turn off power S2 To remove the stand: Place the monitor on a soft cloth or cushion S4 Pull out CTRL BD FFC from I/F BD and tear off it from Main SHD to take off Rear Cover Press and hold the stand release button Lift the stand up and away from the - Dell U2724D | UltraSharp 27 Monitor – Teardown Instructions - Page 2
S7 Pull out ALS FFC from I/F BD Tear off tape from ALS FFC and panel Tear off ALS FFC from Main SHD DELL U2724DB 2 S10 Press and pull on the lock of connector to disassemble USB FFC from I/F BD Attention: USB FFC may be damaged if you pull out it from I/F BD directly without pressing the lock - Dell U2724D | UltraSharp 27 Monitor – Teardown Instructions - Page 3
DELL U2724DB 3 S12 Pull out USB FFC and USB wire from USB BD Take off gasket from USB BD S15 Tear off tape from panel Disassemble EDP FFC cable from Panel Take off Main SHD from panel S16 Unlock 13 MF screws and 2 MF screws (M3*9) to disassemble Middle Frame S13 Tear off a tape from - Dell U2724D | UltraSharp 27 Monitor – Teardown Instructions - Page 4
S18 Tear off 2 tapes from Panel Disassemble 2 plastic BOSS from Panel DELL U2724DB 4 S20 Unlock 8 PCBA screws to disassemble I/F BD, SPS BD from Main SHD S19 Disassemble mylar from Main SHD (Screw Torque: 8.5±1 Kgf) S21 Tear off tape from I/F BD Remove all cables from I/F BD - Dell U2724D | UltraSharp 27 Monitor – Teardown Instructions - Page 5
DELL U2724DB 5 S22 Remove electrolyte capacitors (red mark) from printed circuit boards S22-1 Cut the glue between bulk cap. and PCB with a knife S22-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB - Dell U2724D | UltraSharp 27 Monitor – Teardown Instructions - Page 6
DELL U2724DB 6 S22-3 Take out bulk cap. pin solder with soldering iron and absorber S22-4 Lift the bulk cap. up and away from the PCB - Dell U2724D | UltraSharp 27 Monitor – Teardown Instructions - Page 7
DELL U2724DB 7 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing PCB/PCT) Mercury containing
![](/manual_guide/products/dell-u2724d-ultrasharp-27-monitor-x2013-teardown-instructions-b82adab/1.png)
1
DELL U2724DB
1. Disassembly Procedures
S1
Turn off power
S2
To remove the stand:
Place the monitor on a soft cloth or
cushion
Press and hold the stand release button
Lift the stand up and away from the
monitor
S3
Unlock 4 screws on Rear Cover
Use hands or scraper bar to
disassemble Rear Cover from monitor
Notice the disassembly order:
Top Side=>Right/ Left Side=>Bottom
Side
(Screw Torque:8-10Kgf)
S4
Pull out CTRL BD FFC from I/F BD and
tear off it from Main SHD to take off
Rear Cover
S5
Tear off a tape from CTRL BD FFC and
Rear Cover
S6
Unlock screw*3 to disassemble CTRL
BD from Rear Cover
(Screw Torque: 1.6-1.8Kgf)