Dell U3224KB UltraSharp 32 6K Monitor - U3224KB/U3224KBA Teardown Instructions
Dell U3224KB Manual
![]() |
View all Dell U3224KB manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell U3224KB manual content summary:
- Dell U3224KB | UltraSharp 32 6K Monitor - U3224KB/U3224KBA Teardown Instructions - Page 1
off power.. Unplug external cables(power cable and video S2 cable) from the monitor. DELL U3224KB 1 Tear off screen protector, then wedge your fingers between rear cover and the middle bezel on the corners of the top side of the monitor to release the S5 rear cover, then use one hand to press the - Dell U3224KB | UltraSharp 32 6K Monitor - U3224KB/U3224KBA Teardown Instructions - Page 2
2 DELL U3224KB Tear off 5pcs aluminum foil, then use a Philips-head screwdriver to remove 2pcs screws for unlocking the S8 fan's cover. (No.1~2 screw size=M3x6, Torque=4± - Dell U3224KB | UltraSharp 32 6K Monitor - U3224KB/U3224KBA Teardown Instructions - Page 3
DELL U3224KB 3 Tear off 1pcs aluminum foil for uncovering the fan, then use a Philips-head screwdriver to remove 3pcs S13 screws for unlocking the fan with the - Dell U3224KB | UltraSharp 32 6K Monitor - U3224KB/U3224KBA Teardown Instructions - Page 4
4 DELL U3224KB Put the front bezel on a protective cushion, then tear off the black mylar tape and release LED board from S19 the hooks of the front - Dell U3224KB | UltraSharp 32 6K Monitor - U3224KB/U3224KBA Teardown Instructions - Page 5
Remove electrolyte capacitors (red mark) from S25 printed circuit boards. DELL U3224KB 5 S25-4 Take out bulk cap. pin solder with soldering iron and absorber. S25-1 Cut the glue between bulk cap. and PCB with a knife. S25-5 Lift - Dell U3224KB | UltraSharp 32 6K Monitor - U3224KB/U3224KBA Teardown Instructions - Page 6
6 DELL U3224KB 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU
![](/manual_guide/products/dell-u3224kb-ultrasharp-32-6k-monitor-u3224kbu3224kba-teardown-instructions-4672703/1.png)
1
DELL U3224KB
Unplug external cables(power cable and video
cable) from the monitor.
S2
Turn off power..
1.
Disassembly Procedures:
S1
Remove stand from the product.(Press the stand
release button, lift the stand up and away from the
monitor)
S3
S4
Put the monitor on a protective cushion, then use a
Philips-head screwdriver to remove 4pcs screws for
unlocking mechanisms. Remove DP caps.
(No.1~4 screw size=M4x11; Torque=11
±
1kgfxcm)
S5
Tear off screen protector, then wedge your fingers
between rear cover and the middle bezel on the
corners of the top side of the monitor to release the
rear cover, then use one hand to press the middle
bezel, the other hand to pull up the rear cover in order
of arrow preference for unlocking the rear cover.
3
1
2
1
2
3
4
1
S6
S7
Lift the rear cover up carefully. Disconnect the
joystick key cable from the connector of the interface
board, and then remove the rear cover and put it
aside for later disassembling.
Use a Philips-head screwdriver to remove 2pcs
screw for unlocking the key board, then tear off the
tapes and release the key board.
(No.1
~
2 screw size=M2x3.3, Torque=0.8
~1
kgfxcm)
1
2