Dell U3824DW Firmware Update Instructions for Windows Users Guide
Dell U3824DW Manual
 |
View all Dell U3824DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell U3824DW manual content summary:
- Dell U3824DW | Firmware Update Instructions for Windows Users Guide - Page 1
Instruction User's Guide Overview Firmware update tool is an application used to update monitor firmware. Firmware Update Pre-requisites 1 The monitor Ensure that other USB cables and USB devices between the monitor and the computer are unplugged. NOTE: Disconnect all other monitors from the notebook - Dell U3824DW | Firmware Update Instructions for Windows Users Guide - Page 2
. NOTE: Do not unplug the cables till the updating process finishes. NOTE: Please disable sleep mode before you launch the firmware update. NOTE: Update one monitor at a time. Do not conduct firmware update on multiple monitors at a given time. 2 | Firmware Update Instruction User's Guide - Dell U3824DW | Firmware Update Instructions for Windows Users Guide - Page 3
Updating firmware 1 Double-click the ISP icon . 2 Initializing for device status. 3 The utility will load the firmware file automatically. Or, you can select your file manually by clicking and navigating to the UPG firmware file. Firmware Update Instruction User's Guide | 3 - Dell U3824DW | Firmware Update Instructions for Windows Users Guide - Page 4
is completed, please follow the on-screen instructions to restart your monitor. NOTE: Update takes up to 8 minutes. Do not power off or disconnect cable while updating. NOTE: If you experience problems during or after the update, refer to Troubleshooting. 4 | Firmware Update Instruction User's Guide - Dell U3824DW | Firmware Update Instructions for Windows Users Guide - Page 5
on the monitor. 5 Try updating again with the Monitor Firmware Update Utility. USB device inactive monitor's firmware. Do not turn off the ISP "Firmware update was not tool until the update is complete. completed. Please update the monitor firmware again." Firmware Update Instruction User's Guide
-
1 -
2 -
3 -
4 -
5
 |
 |
Firmware Update Instruction User's Guide
|
1
Firmware Update Instruction User's Guide
Overview
Firmware update tool is an application used to update monitor firmware.
Firmware Update Pre-requisites
1
The monitor must be connected to a power source during the firmware updating process.
2
Make sure there is only ONE video input source, e.g. DisplayPort, HDMI, or USB Type-C,
from the computer to the monitor.
NOTE:
Ensure that all other video cables between the monitor and the computer are
unplugged.
3
Connect the USB Type-C cable directly between the monitor and your computer. Do not
use any other device between this connection.
NOTE:
Ensure that other USB cables and USB devices between the monitor and the
computer are unplugged.
NOTE:
Disconnect all other monitors from the notebook or desktop. This will ensure that
only one display is connected while conducting firmware update.
NOTE:
It is recommended to update the firmware with a notebook as the monitor screen
may go blank during the firmware update process.