Dell UP2720QA UltraSharp 27 4K PremierColor Monitor— Teardown Instr
Dell UP2720QA Manual
 |
View all Dell UP2720QA manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell UP2720QA manual content summary:
- Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 1
DELL UP2720Q_UP2720QA 1 1. Disassembly Procedures S1 Turn off the monitor. S2 Place the monitor on a soft cloth along the desk. 1. Removing the monitor stand. 1). Place the monitor on a soft cloth or cushion. 2). Press and hold the stand release button. 3). Lift the stand up and away from the - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 2
S5 Unlock 1 USB BD screw to disassemble USB BD from Rear Cover. DELL UP2720Q_UP2720QA 2 S8 Remove 2 magnets from Middle Frame. (Screw Torque: 4.5±0.5kgf) S6 Tear off the tape to disassemble USB BD wire from USB BD. S9 Tear off 2 tapes on Middle Frame S10 Remove black tapes and unplug the - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 3
DELL UP2720Q_UP2720QA 3 S12 Unlock 5 screws to disassemble Control BD module from Middle Frame. S15 Disassemble Calibrator Cover from Middle Frame. S16 Disassemble "Spring L" and "Spring R" from Calibrator Cover. (Screw Torque: 1.2 ±0.5kgf) S13 Unlock 5 screws to disassemble Control BD from - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 4
S18 Unlock 6 screws to disassemble CALIBRATOR Module from middle frame. DELL UP2720Q_UP2720QA 4 S21 Unplug "CALIBRATOR FFC Cable" from CALIBRATOR module. (Screw Torque: 4.5 ±0.5kgf) S19 Take of CALIBRATOR Module from Middle Frame. S22 1). Unlock 5 screws to disassemble Main SHD from panel. (Screw - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 5
DELL UP2720Q_UP2720QA 5 S24 Take off SPS BD Mylar from SPS BD. S28 1). Disassemble MCU BD from Main SHD. 2). Unplug wires from MCU BD to take off MCU BD. S25 Unlock 12 PCBA screws. (Screw Torque: 8.5 ±0.5kgf) S26 1). Disassemble TBT BD from Main SHD. 2). Unplug wires from TBT BD to take off TBT - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 6
S31 Disassemble SPS BD from Main SHD and unplug AC wire from SPS BD. DELL UP2720Q_UP2720QA 6 S33 Unlock 1 grounding screw and disassemble AC wire from Main SHD. S32 Unplug SPS BD wire from SPS BD. (Screw Torque: 6.5 ±0.5kgf) - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 7
DELL UP2720Q_UP2720QA 7 S34 Remove electrolyte capacitors (red mark) from printed circuit boards S34-1 Cut the glue between bulk cap. and PCB with a knife S34-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 8
DELL UP2720Q_UP2720QA 8 S34-3 Take out bulk cap. pin solder with soldering iron and absorber S34-4 Lift the bulk cap. up and away from the PCB - Dell UP2720QA | UltraSharp 27 4K PremierColor Monitor— Teardown Instr - Page 9
DELL UP2720Q_UP2720QA 9 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing PCB/PCT) Mercury
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
1
DELL UP2720Q_UP2720QA
1. Disassembly Procedures
S1
Turn off the monitor.
S2
Place the monitor on a soft cloth along
the desk.
1. Removing the monitor stand.
1). Place the monitor on a soft cloth or
cushion.
2). Press and hold the stand release
button.
3). Lift the stand up and away from the
monitor.
S3
Unlock 2 screws on the bottom side
of Rear Cover.
(Screw Torque: 4.5 ± 0.5kgf)
Unlock 4 screws on Rear Cover.
(Screw Torque: 9 ±1kgf)
S4
Disassemble Rear Cover from
middle frame.
Notice the disassembly order:
1).Disassemble the top side.
2).Disassemble the Left/Right side.
3).Disassemble the bottom side.
4). Unplug USB BD wire from TBT
BD to take off Rear Cover.