Dell UP3218KA UltraSharp Monitor Teardown Instructions
Dell UP3218KA Manual
 |
View all Dell UP3218KA manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell UP3218KA manual content summary:
- Dell UP3218KA | UltraSharp Monitor Teardown Instructions - Page 1
DELL UP3218K 1 1 Disassembly Procedures: S1 Turn off power S2 Unplug external cables from product Wedge your fingers between the rear cover and the middle bezel on the corners of the top side of the S5 monitor to release the rear cover, then use one hand to press the middle bezel, the other hand - Dell UP3218KA | UltraSharp Monitor Teardown Instructions - Page 2
DELL UP3218K 2 Tear off 7 pieces of aluminum foil. Disconnect the lamp cable from the connectors of the power board and panel module. Use a Philips-head screwdriver to S7 remove 3 screws for unlocking the cooling fans' protective cover with the middle iron bezel. (No.1~3 Screw size=M3x4, Torque - Dell UP3218KA | UltraSharp Monitor Teardown Instructions - Page 3
DELL UP3218K 3 Remove the middle iron bezel. Tear off the mylar tape S11 for releasing the function key cable from the hooks of the middle iron bezel. Turn over the bracket chassis. Use a Philips-head screwdriver to remove 4 screws for unlocking the S14 interface board and LED driver board. - Dell UP3218KA | UltraSharp Monitor Teardown Instructions - Page 4
S17 Remove electrolyte capacitors (red mark) from printed circuit boards DELL UP3218K 4 S1ϳ-1 Cut the glue between bulk cap. and PCB with a knife S1ϳ-2 Ensure cutting path within the glue, don't touch bulk cap. or PCB S1ϳ-3 Cut into the bottom of bulk cap. and pull it up carefully - Dell UP3218KA | UltraSharp Monitor Teardown Instructions - Page 5
DELL UP3218K 5 S1ϳ-4 Take out bulk cap. pin solder with soldering iron and absorber S1ϳ-5 Lift the bulk cap. up and away from the PCB - Dell UP3218KA | UltraSharp Monitor Teardown Instructions - Page 6
DELL UP3218K 6 Ϯ. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing PCB/PCT) Mercury containing
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
1
DELL UP3218K
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
Use a Philips-head screwdriver to remove four
screws for unlocking mechanisms.
(No.1~4 screw size=M4x8; Torque=10~11kgfxcm)
S2
1
Disassembly Procedures:
Remove the rear cover and put it on a protective
cushion. Use a Philips-head screwdriver to remove
14 screws for unlocking the middle plastic bezel with
the whole unit, and then remove the middle plastic
bezel carefully.
(No.1~14 screw size=M3x5.5, Torque=4
±
0.5kgfxcm)
S1
2
3
4
1
S3
S4
S
5
S
6
3
3
1
1
2
2
4
4
6
1
4
3
14
13
10
5
2
11
12
7
8
9
Turn off power
Unplug external cables from product
Remove stand from product