Dell VNX5600 Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix
Dell VNX5600 Manual
View all Dell VNX5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell VNX5600 manual content summary:
- Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 1
Dell EMC Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix May 2018 REV 09 Copyright © 2018 Dell Inc. or its subsidiaries. All rights reserved. Published May 2018 the USA. For the most up-to-date regulatory document for your product line, go to Dell EMC Online Support (https://support.emc.com). - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 2
to the separate EHC on VxRail ESSM for remote end point and EHC running on a VxRail b) Please check addendum versions of RCM as well for supported array versions listed below Vendor Storage Arrays Dell EMC Dell EMC Dell EMC Dell EMC Product Versions EMC VMAX 40K, VMAX 20K, VMAX 10K xxx987xxxx - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 3
(Source & Target=XtremIO) Switches: All FC SAN switches (2 Gb/s or greater) from EMC Connectrix®, Brocade, Cisco, QLogic for host and storage connectivity are supported. Refer to the Switched Fabric Topology Parameters table located on the E-Lab Navigator (ELN) at https://elabnavigator.emc.com for - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 4
EMC RecoverPoint with VMware Site Recovery Manager. -VPLEX Local with RecoverPoint is supported for disaster recovery. Both the Source and Target arrays must be the same of the RCMs range listed in this ESSM are also supported. Build 3634794 | 3634793 | Installer build vSphere management server - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 5
Operations Manager 6.2.1 vRA Plug-in for vRealize 7.1 Orchestrator ViPR Plug-in for VMware vRealize 2.4 Orchestrator Build 3634788 | 3634794 | Installer build vSphere management server Build 4977495 | VMware Virtual Networking Build 4233593 | VMware vRealize Orchestrator Plugin for NSX Build - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 6
for the server environment Footnote: a. For a list of supported guest operating systems, refer to http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software. For additional information, refer to the Guest Operating System Installation Guide at http://www.vmware.com/pdf - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 7
Open Source Requests Python Module 2.10.0 Python Library to HTTP/1.1 requests Footnote: a. RecoverPoint SE is not currently supported b. Please log an SR with RP4VM support to request this engineering build, please also check technical notes for the latest deployment details via ASKEHC - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 8
version support is dictated by Avamar version support. If an Avamar release supports Data Domain then EHC supports this release. c) Please use the appropriate version for either physical or virtual Data Domain specified above d) Recommended DDOS 6.0.2.x as a minimum. Encryption Services Dell - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 9
HFA/AFA N/A 4.1.1.913 ViPR 3.5.0.1 & correct SE/SMI-S below Integration Software Support of new version to Dell EMC ViPR 3.0 3.5.0.1 support Unity or issues. Arrays and firmware other than Unity are also supported when using this version. Virtualization Software Dell EMC ViPR Plug-in - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 10
New 06/30/17 Reason for change Version 6.0.13 thru 6.0.14 6.0.13 thru 6.0.16 Extended support to new RCMs (See note below). Extended support to new RCMs Enginuity 5977.691 (min) 5977.1125 (max Support for later Microcode (1125 requires SE upgrade) 6.0U3 Exp 7a Bld: 5224924 6.0U3b Bld: 5326177 - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 11
. Please refer to upgrade notes GA artifacts relating to changing default SRM behavior changes. Notes: a) Refer to ViPR support matrix for SE version required for given VMAX3 microcode. b) RCM 6.0.14 thru 6.0.16 SRM DR requires SRM 6.1.2 for EHC Disaster Recovery + modifications - see inside EMC - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 12
RCM 6.0.5 thru 6.0.13 1.32.5 2.0.0.2 3.7.2 6.2.1 New 09/15/17 Reason for change Version 6.0.13 thru 6.0.16 Extended support to new RCMs - please note the requirements for Unity support in revision 01 and 02 related to ViPR version required for Unity. 2.0.1.1 Security vulnerabilities present in - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 13
Domain Operating System 5.7.30.2 (DDVE) 5.7.30.2 (DD) 6.0.x Any compatible version with Avamar 7.3.1 DD or DDVE. Notes: a) Please check addendum versions of RCM as well for supported array versions listed above b) Recommended DDOS 6.0.2.x as a minimum. - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 14
Array based Replication Dell EMC ViPR SRA 7.1 5.0.5.163 New 10/13/17 Reason for change Version 4.0.25-x (XMS 4.2.2) Requires ViPR 3.6.0 as a minimum 3.6.1.0-193 6.2 Adds support for new platforms and features: Note vRO Plugin is the same as 3.6.0 SMI-S providers can be upgraded per the ViPR - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 15
Data Protection Dell EMC Avamara 7.3 7.4.1-58 + HF283346 HF addresses security vulnerabilities in build 58. - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 16
3.0.0.x and above as a minimum 14.0.3 4.1.1 with Apache Struts2 HF Addresses vulnerabilities in previous versions, requires ViPR 3.5.0.x as a minimum Adds support for new platforms and features: Note vRO Plugin is the same as 3.6.0 6.2.9 Build: 6926419 Addresses bugs in previous version 2.7.13 - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 17
new versions from factory - note an IA may be required for certain EHC components on a higher revision. 6.0.0 (XMS 6.0.0) 4.2.1.953 XtremIO X 2 Support requires ViPR 3.6.0 as a minimum Requires ViPR 3.6.0 as a minimum 2.2 SP1 Updated to match PPVE 6.2 and latest version. 6.0 Update 3 Patch - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 18
EMC Avamara 7.4.1-58 ESA-2018-001 Avamar 7.x Hotfix: KB515814 Footnotes: a) Avamar vulnerabilities ESA-2017-167 & ESA-2018-001 require security roll ups and hotfixes, see support.emc.com/kb/515202 & support.emc.com/kb/515814 for details. b) Please check addendum versions of RCM as well for - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 19
factory - note an IA may be required for certain EHC components on a higher revision. VxBlock 350 requires an IA to use Unity code below. Add support for new vSphere 6.0 based versions. Requires an IA when used with latest RCMs above. 2.0.1.4 Requires an RCM upgrade to 3.2.4 as above. Note this will - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 20
6.3.0.7 6.5 features/address Advisor (DPA) vulnerabilities Footnotes: a) Note: latest firmware versions require the most recent version of ViPR listed in the ESSM, refer to the ViPR support matrix for further clarification. b) Please check addendum versions of RCM as well for - Dell VNX5600 | Enterprise Hybrid Cloud 4.1.1 Simple Support Matrix - Page 21
EMC Simple Support Matrix Appendix Enterprise Hybrid Cloud 4.1.1 Platform GA Date: March 30, 2017 Platform Appendix Revision require the most recent version of ViPR listed in the ESSM, refer to the ViPR support matrix for further clarification. b) Please check addendum versions of RCM as well for
Copyright © 2018 Dell Inc. or its subsidiaries. All rights reserved.
Published May 2018
Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS-IS.“ DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF
ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY
DELL SOFTWARE DESCRIBED IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE.
Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners.
Published in the USA.
For the most up-to-date regulatory document for your product line, go to Dell EMC Online Support (https://support.emc.com).
Dell EMC Enterprise Hybrid Cloud
4.1.1
Simple Support Matrix
May 2018
REV 09