Dell Vostro 3582 Service Manual without optical drive

Dell Vostro 3582 Manual

Get Dell Vostro 3582 PDF manuals and user guides View all Dell Vostro 3582 manuals
Add to My Manuals
Save this manual to your list of manuals

Dell Vostro 3582 manual content summary:

  • Dell Vostro 3582 | Service Manual without optical drive - Page 1
    Vostro 3582 Service Manual (without optical drive) Regulatory Model: P75F Regulatory Type: P75F011
  • Dell Vostro 3582 | Service Manual without optical drive - Page 2
    of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be
  • Dell Vostro 3582 | Service Manual without optical drive - Page 3
    instructions...6 Before working inside your computer...6 Electrostatic discharge-ESD protection...7 Transporting sensitive components...7 Lifting equipment ...7 ESD field service kit ...8 Components of an ESD field service Intel Optane memory...15 3 Removing and installing SSD)...25 Contents 3
  • Dell Vostro 3582 | Service Manual without optical drive - Page 4
    Removing the M.2 2280 solid state drive...25 Installing the M.2 2280 Solid state drive ...26 Removing the M.2 2230 Solid state drive...27 Installing the M.2 2230 Solid state drive...28 I/O board...30 Removing the I/O board...30 Installing the IO board...31 Touchpad...33 Removing the touchpad...33
  • Dell Vostro 3582 | Service Manual without optical drive - Page 5
    assembly...78 Removing the palmrest and keyboard assembly...78 4 Troubleshooting...80 Enhanced Pre-Boot System Assessment (ePSA) diagnostics 80 the ePSA diagnostics...80 System diagnostic lights...80 Flashing BIOS (USB key)...81 Flashing the BIOS...82 Backup media and recovery options...82 WiFi
  • Dell Vostro 3582 | Service Manual without optical drive - Page 6
    only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came
  • Dell Vostro 3582 | Service Manual without optical drive - Page 7
    be obvious, such as intermittent problems or a shortened product life type of damage to recognize and troubleshoot is the intermittent (also called latent be returned to Dell, it is critical toes out. 2 Tighten stomach muscles. Abdominal muscles support your spine when you lift, offsetting the force
  • Dell Vostro 3582 | Service Manual without optical drive - Page 8
    for safe transport. ESD protection summary It is recommended that all field service technicians use the traditional wired ESD grounding wrist strap and protective anti-static mat at all times when servicing Dell products. In addition, it is critical that technicians keep sensitive parts separate
  • Dell Vostro 3582 | Service Manual without optical drive - Page 9
    turning on your computer. CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers. Steps 1 Connect any external devices, such as a port replicator or media base, and replace any cards, such as
  • Dell Vostro 3582 | Service Manual without optical drive - Page 10
    2 Technology and components NOTE: Instructions provided in this section are applicable on computers shipped 1.2 volts, compared to DDR3 which requires 1.5 volts of electrical power to operate. DDR4 also supports a new, deep power-down mode that allows the host device to go into standby without
  • Dell Vostro 3582 | Service Manual without optical drive - Page 11
    code. If all memory fails, the LCD does not turn on. Troubleshoot for possible memory failure by trying known good memory modules in the primary advantage is cable reduction and content protection provisions. HDMI supports standard, enhanced, or high-definition video, plus multichannel digital
  • Dell Vostro 3582 | Service Manual without optical drive - Page 12
    bus power and increased device current draw to better accommodate power-hungry devices • New power management features • Full-duplex data transfers and support for new transfer types • Backward USB 2.0 compatibility • New connectors and cable The topics below cover some of the most commonly asked
  • Dell Vostro 3582 | Service Manual without optical drive - Page 13
    Speed Currently, there are 3 speed modes defined by the latest USB 3.0/USB 3.1 Gen 1 specification. They are Super-Speed, Hi-Speed and FullSpeed. The new SuperSpeed mode has a transfer rate of 4.8Gbps. While the specification retains Hi-Speed, and Full-Speed USB mode, commonly known as USB 2.0 and
  • Dell Vostro 3582 | Service Manual without optical drive - Page 14
    Windows 10 64-bit version or higher • Intel Rapid Storage Technology driver version 15.9.1.1018 or higher Table 2. Intel Optane memory specifications Feature Interface Connector Configurations supported Capacity Specifications PCIe 3x2 NVMe 1.1 M.2 card slot (2230/2280) • 7th Generation or higher
  • Dell Vostro 3582 | Service Manual without optical drive - Page 15
    if you accept the warning. The disabling progress is displayed. 5 Click Reboot to complete disabling Intel Optane memory and restart your computer. Technology and components 15
  • Dell Vostro 3582 | Service Manual without optical drive - Page 16
    3 Removing and installing components Recommended tools The procedures in this document may require the following tools: • Phillips #00 and #01 screwdriver • Plastic scribe Screw list The following table provides the list of screws that are used for securing different components. Table 3. Screw
  • Dell Vostro 3582 | Service Manual without optical drive - Page 17
    Component Power-adapter port I/O board Power button Solid-state drive System board Wireless-antenna bracket SD card Screw type M2x3 M2x4 M2x2 M2x2 M2x4 M2x4 Quantity 1 2 1 1 1 2 Removing the SD card Prerequisite 1 Follow the procedure in Before working inside your computer. Steps 1 Push the SD
  • Dell Vostro 3582 | Service Manual without optical drive - Page 18
    Installing the SD card Step Slide the Secure Digital into the slot until it clicks into place. Next step 1 Follow the procedure in after working inside your computer. Base cover Removing the base cover Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the SD card.
  • Dell Vostro 3582 | Service Manual without optical drive - Page 19
    4 Pry the base cover from the top-left corner [1] and continue to pry open the sides of the base cover [2, 3, 4]. Removing and installing components 19
  • Dell Vostro 3582 | Service Manual without optical drive - Page 20
    Installing the base cover Steps 1 Place the base cover on the palmrest and keyboard assembly [1]. 2 Press on the edges and sides of the base cover till it snaps into place [2, 3, 4] 3 Tighten the three captive screws, replace the six (M2.5x7) screws and the single (M2x4) screw that secure the base
  • Dell Vostro 3582 | Service Manual without optical drive - Page 21
    Next steps 1 Install the SD card 2 Follow the procedure in after working inside your computer Battery Removing the battery 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Disconnect the battery cable from the connector on the system board [1]. 4 Remove the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 22
    Installing the battery Steps 1 Align the screw holes on the battery with the screw holes on the palm rest assembly [1]. 2 Replace the four screws to secure the battery to the system [2]. 3 Connect the battery cable to its connector on the system board [3]. 22 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 23
    Next steps 1 Install the Base cover: 2 Follow the procedures in After working inside your computer. Memory modules Removing the memory module Prerequisite 1 Follow the procedure in Before working inside your computer. 2 Remove the SD card. 3 Remove the base cover. 4 Remove the battery Steps 1 Pull
  • Dell Vostro 3582 | Service Manual without optical drive - Page 24
    Installing the memory module Steps 1 Insert the memory module into the memory socket [1]. 2 Press the memory module until the clips secure the memory module [2]. 24 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 25
    in After working inside your computer. M2. SATA Solid State Drive (SSD) Removing the M.2 2280 solid state drive Prerequisite 1 Follow the procedure in Remove the battery Steps 1 Loosen the captive screws that secure the SSD thermal plate and solid-state drive to the palm rest and keyboard assembly
  • Dell Vostro 3582 | Service Manual without optical drive - Page 26
    2280 Solid state drive Steps 1 Slide and insert the solid-state drive into the solid-state drive slot [1]. 2 Place the thermal pad on the SSD as shown in the image [2]. 3 Tighten the captive screw that secures the thermal plate to the palmrest and keyboard assembly [3]. 4 Replace the single (M2x3
  • Dell Vostro 3582 | Service Manual without optical drive - Page 27
    in Before working inside your computer. 2 Remove the SD card. 3 Remove the base cover. 4 Remove the battery Steps 1 Loosen the captive screws that secure the SSD thermal plate and solid-state drive to the palm rest and keyboard assembly [1]. 2 Remove the screw that secures the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 28
    4 Turn the thermal plate over. 5 Remove the (M2x2) screw that secures the solid-state drive to the thermal plate [1]. 6 Lift the solid-state drive off the thermal plate [2]. Installing the M.2 2230 Solid state drive Steps 1 Place the solid-state drive into the slot of the thermal plate [1] 2 Replace
  • Dell Vostro 3582 | Service Manual without optical drive - Page 29
    3 Slide and insert the solid-state drive thermal plate into the solid-state drive slot [1]. 4 Tighten the captive screw that secures the thermal plate to the palmrest and keyboard assembly [2]. 5 Replace the (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [3]. Next
  • Dell Vostro 3582 | Service Manual without optical drive - Page 30
    I/O board Removing the I/O board 1 Disconnect the coin-cell battery cable from the I/O board [1]. 2 Open the latch and disconnect the I/O-board cable from the system board [2]. 3 Remove the two screws (M2x4) that secure the I/O board to the palm rest and keyboard assembly [1]. 4 Lift the I/O board
  • Dell Vostro 3582 | Service Manual without optical drive - Page 31
    Installing the IO board 1 Using the alignment posts, place the I/O board on the palm rest and keyboard assembly [1]. 2 Replace the two screws (M2x4) that secure the I/O board to the palm rest and keyboard assembly [2]. Removing and installing components 31
  • Dell Vostro 3582 | Service Manual without optical drive - Page 32
    3 Connect the coin-cell battery cable to the I/O board [1]. 4 Connect the I/O-board cable to the system board and close the latch to secure the cable [2]. 32 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 33
    Touchpad Removing the touchpad Prerequisite 1 Follow the procedure in Before working inside your computer. 2 Remove the SD card. 3 Remove the base cover. 4 Remove the battery Steps 1 Open the latch and disconnect the hard-drive cable from the system board [1]. 2 Open the latch and disconnect the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 34
    6 Remove the four screws (M2x2) that secure the touchpad to the palm rest and keyboard assembly [1]. 7 Lift the touchpad off the palm rest and keyboard assembly [2]. 34 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 35
    Installing the touchpad About this task NOTE: Ensure that the touchpad is aligned with the guides available on the palm-rest and keyboard assembly, and the gap on either sides of the touchpad is equal. Steps 1 Place the touchpad into the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 36
    5 Affix the tape that secures the touchpad to the palm rest and keyboard assembly [1]. 6 Slide the touchpad cable into the connector on the system board and close the latch to secure the cable [2]. 7 Slide the hard-drive cable into the connector on the system board and close the latch to secure the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 37
    Next steps 1 Install the battery. 2 Install the base cover. 3 Install the SD card. 4 Follow the procedures in After working inside your computer. Hard drive assembly Removing the hard drive assembly Prerequisite 1 Follow the procedure in Before working inside your computer. 2 Remove the SD card. 3
  • Dell Vostro 3582 | Service Manual without optical drive - Page 38
    Installing the hard drive assembly Steps 1 Align the screw holes on the hard drive assembly with the screw holes on the palm rest and keyboard assembly [1]. 2 Replace the four screws (M2x3) that secure the hard drive assembly to the palm rest and keyboard assembly [2]. 3 Connect the hard drive cable
  • Dell Vostro 3582 | Service Manual without optical drive - Page 39
    Steps 1 Disconnect the interposer from the hard drive assembly. 2 Remove the four screws (M3x3) that secure the hard drive bracket to the hard drive [1]. 3 Lift the hard drive bracket off the hard drive [2]. Installing the hard drive Steps 1 Align the screw holes on the hard drive bracket with the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 40
    3 Connect the interposer to the hard drive assembly. Next steps 1 Install the hard drive assembly. 2 Install the battery. 3 Install the base cover. 4 Install the SD card. 5 Follow the procedures in After working inside your computer. WLAN card Removing the WLAN card Prerequisite 1 Follow the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 41
    3 Remove the base cover. 4 Remove the battery Steps 1 Remove the M2x3 screw that secures the WLAN bracket to the system [1]. 2 Lift the WLAN bracket from the system [2]. 3 Disconnect the WLAN antenna cables from the connectors on the WLAN card [3]. 4 Pull the WLAN card from the connector on the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 42
    setup program's settings to default. Before removing the coin-cell battery, it is recommended to note the BIOS setup program's settings. 1 Follow the procedure in Before working inside your computer 2 Remove the base cover. 3 Remove the battery. Steps 1 Disconnect the coin-cell battery
  • Dell Vostro 3582 | Service Manual without optical drive - Page 43
    Installing the coin-cell battery Steps 1 Affix the coin cell battery on the palm rest and keyboard assembly [1]. 2 Connect the coin-cell battery cable to the connector on the IO board [2]. Removing and installing components 43
  • Dell Vostro 3582 | Service Manual without optical drive - Page 44
    Next steps 1 Install the battery. 2 Install the base cover. 3 Install the SD card. 4 Follow the procedures in After working inside your computer. Thermal plate Removing the thermal plate Prerequisite 1 Follow the procedure in Before working inside your computer. 2 Remove the SD card. 3 Remove the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 45
    3 Remove the two (M2.5x5) screws that secure the thermal plate to the chassis [1]. 4 Loosen the four captive screws that secure the thermal plate to the chassis in a sequential order (1,2,3,4) as shown on the thermal plate [2] . 5 Lift the thermal plate from the system board [3]. Removing and
  • Dell Vostro 3582 | Service Manual without optical drive - Page 46
    Installing the thermal plate Steps 1 Place the thermal plate on the system board and align the screw holes on the thermal plate with the screw holes on the system board [1]. 2 Tighten the captive screws in a sequential order (1,2,3,4) as indicated on the heat sink to secure the thermal plate to the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 47
    . 3 Remove the base cover. 4 Remove the battery 5 Remove the M.2 SSD card Steps 1 Disconnect the speaker cable from the system board [1]. 2 Note the speaker cable routing and remove it from the routing guides on palm rest and key board assembly [2]. 3 Lift the speakers, along
  • Dell Vostro 3582 | Service Manual without optical drive - Page 48
    alignment posts and rubber grommets, place the speakers in the slots on the palm rest and keyboard assembly [1]. 2 Route the speaker cable through the routing guides on the palm rest and keyboard assembly [2]. 3 Connect the speaker cable to the system board [3]. 48 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 49
    Next steps 1 Install the M.2 SSD card. 2 Install the battery. 3 Install the base cover. 4 Install the SD card. 5 Follow the procedures in After working inside your computer. Display assembly Removing the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 50
    4 Remove the five screws (M2.5x5) that secure the left and right hinges [1]. 5 Slightly lift the palmrest assembly [2] 50 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 51
    6 Lift the hinges [1] and pull the display assembly to remove the display assembly from the system [2] Installing the display assembly Steps 1 Slide the palm rest and keyboard assembly at an angle [1]. 2 Close the palm rest and keyboard assembly [2]. 3 Using the alignment posts, press the hinges
  • Dell Vostro 3582 | Service Manual without optical drive - Page 52
    4 Replace the five screws (M2.5x5) that secure the left and right hinges to the system board and palm rest and keyboard assembly. 52 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 53
    5 Route the display cable through the routing clips[1]. 6 Connect the display cable to the system board [2]. 7 Route the wireless cable through the routing clips [3]. Removing and installing components 53
  • Dell Vostro 3582 | Service Manual without optical drive - Page 54
    Next steps 1 Install the display assembly. 2 Install the thermal pad. 3 Install the WLAN card. 4 Install the battery. 5 Install the base cover. 6 Install the SD card. 7 Follow the procedures in After working inside your computer. System board Removing the system board Prerequisites 1 Follow the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 55
    3 Open the latch and disconnect the power button board cable from the connector on the system board [1]. 4 Open the latch and disconnect the finger-print reader cable from the connector on the system board [2]. 5 Open the latch and disconnect the I/O board cable from the connector on the system
  • Dell Vostro 3582 | Service Manual without optical drive - Page 56
    9 Remove the screw (M2x4) that secures the system board to palm rest and keyboard assembly. 10 Lift the system board off the palm rest and keyboard assembly. 56 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 57
    Installing the system board Steps 1 Align the screw hole on the system board with the screw hole on the palm rest and keyboard assembly [1]. 2 Replace the screw (M2x4) that secures the system board to the palm rest and keyboard assembly [2]. Removing and installing components 57
  • Dell Vostro 3582 | Service Manual without optical drive - Page 58
    3 Connect the power button board cable from the connector on the system board [1]. 4 Connect the finger-print reader cable from the connector on the system board [2]. 5 Connect the I/O board cable from the connector on the system board [3]. 6 Connect the hard-drive cable from the connector on the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 59
    9 Connect the power-adapter port cable from the system board [1]. 10 Connect the speaker cable from the system board [2]. Next steps 1 Install the display assembly. Removing and installing components 59
  • Dell Vostro 3582 | Service Manual without optical drive - Page 60
    2 Install the thermal pad. 3 Install the WLAN card. 4 Install the battery. 5 Install the base cover. 6 Install the SD card. 7 Follow the procedures in After working inside your computer. Display bezel Removing the display bezel Prerequisites 1 Follow the procedure in Before working inside your
  • Dell Vostro 3582 | Service Manual without optical drive - Page 61
    Installing the display bezel Step Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place [1]. Next steps 1 Install the display assembly. 2 Install the WLAN card. 3 Install the battery. 4 Install the base cover. 5 Install the SD
  • Dell Vostro 3582 | Service Manual without optical drive - Page 62
    7 Remove the display assembly 8 Remove the display bezel Steps 1 Using a plastic scribe, gently pry the camera off the display back-cover and antenna assembly [1]. 2 Disconnect the camera cable from the camera module [2]. 3 Lift the camera module from the display back-cover and antenna assembly [3].
  • Dell Vostro 3582 | Service Manual without optical drive - Page 63
    Next steps 1 Install the display bezel. 2 Install the display assembly. 3 Install the WLAN card. 4 Install the battery. 5 Install the base cover. 6 Install the SD card. 7 Follow the procedures in After working inside your computer. Display panel Removing the display panel Prerequisites 1 Follow the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 64
    8 Remove the display bezel Steps 1 Remove the four (M2x2) screws that secure the display panel to the display back-cover and antenna assembly [1]. 2 Lift the display panel and turn it over [2]. 3 Peel the tape that secures the display cable to the back of the display panel [1]. 4 Lift the latch and
  • Dell Vostro 3582 | Service Manual without optical drive - Page 65
    Installation display panel Steps 1 Place the display panel on a flat and clean surface [1]. 2 Connect the display cable to the connector at the back of the display panel and close the latch to secure the cable [2]. 3 Adhere the tape that secures the display cable to the back of the display panel
  • Dell Vostro 3582 | Service Manual without optical drive - Page 66
    5 Align the screw holes on the display panel with the screw holes on the display back-cover and antenna assembly. 6 Replace the four (M2x2) screws that secure the display panel to the display back-cover and antenna assembly [1]. 66 Removing and installing components
  • Dell Vostro 3582 | Service Manual without optical drive - Page 67
    Next steps 1 Install the display bezel. 2 Install the display assembly. 3 Install the WLAN card. 4 Install the battery. 5 Install the base cover. 6 Install the SD card. 7 Follow the procedures in After working inside your computer. Display hinges Removing the display hinges Prerequisites 1 Follow
  • Dell Vostro 3582 | Service Manual without optical drive - Page 68
    Installing the display hinges Steps 1 Align the screw holes on the hinges and brackets with the screw holes on the display back-cover and antenna assembly [1]. 2 Replace the eight (M2.5x2.5) screws and two (M2x2) screws that secure the hinges to the display back-cover and antenna assembly [2, 3]. 68
  • Dell Vostro 3582 | Service Manual without optical drive - Page 69
    Next steps 1 Install the display panel. 2 Install the display bezel. 3 Install the display assembly. 4 Install the WLAN card. 5 Install the battery. 6 Install the base cover. 7 Install the SD card. 8 Follow the procedures in After working inside your computer. Display cable Removing the display
  • Dell Vostro 3582 | Service Manual without optical drive - Page 70
    the display bezel 9 Remove the display panel 10 Remove the display hinges Steps 1 Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly [1]. 2 Peel the adhesive that secures the camera cable [2]. 3 Lift the camera cable and the display
  • Dell Vostro 3582 | Service Manual without optical drive - Page 71
    Next steps 1 Install the display hinges. 2 Install the display panel. 3 Install the display bezel. 4 Install the display assembly. 5 Install the WLAN card. 6 Install the battery. 7 Install the base cover. 8 Install the SD card. 9 Follow the procedures in After working inside your computer. Power
  • Dell Vostro 3582 | Service Manual without optical drive - Page 72
    7 Remove the display assembly Steps 1 Open the latch and disconnect the power-button board cable from the system board [1]. 2 Peel off the tape that secures the power-button board to the palm rest and keyboard assembly [2]. 3 Remove the screw (M2x3) that secures the power-button board to the palm
  • Dell Vostro 3582 | Service Manual without optical drive - Page 73
    Next steps 1 Install the display assembly. 2 Install the thermal pad. 3 Install the WLAN card. 4 Install the battery. 5 Install the base cover. 6 Install the SD card. 7 Follow the procedures in After working inside your computer. Power button Removing the power button Prerequisite 1 Follow the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 74
    Steps 1 Remove the M2x2 screw that secure the power button to the palm rest and keyboard assembly [1]. 2 Lift the power button off the palm rest and keyboard assembly [2]. Installing the power button Steps 1 Align and place the power button on the palm rest and keyboard assembly [1]. 2 Replace the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 75
    the power-adapter port cable from the connector on the system board [1]. 2 Note the power-adapter port cable routing and remove it from the routing guides on the palm rest and keyboard assembly [2]. Removing and installing components 75
  • Dell Vostro 3582 | Service Manual without optical drive - Page 76
    screw (M2x2) that secures the power-adapter port to the palm rest and keyboard assembly [2]. 3 Route the power-adapter port cable through the routing guides on the palm rest and keyboard assembly [3]. 4 Connect the power-adapter port cable to the connector on the system board [4]. 76 Removing and
  • Dell Vostro 3582 | Service Manual without optical drive - Page 77
    Display back-cover Removing the display back-cover Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the SD card. 3 Remove the base cover. 4 Remove the battery 5 Remove the WLAN card 6 Remove the thermal plate 7 Remove the display assembly 8 Remove the display
  • Dell Vostro 3582 | Service Manual without optical drive - Page 78
    in before working inside your computer 2 Remove the SD card. 3 Remove the base cover. 4 Remove the battery 5 Remove the memory 6 Remove the WLAN 7 Remove the SSD 8 Remove the speakers 9 Remove the coin-cell battery 10 Remove the hard drive assembly 11 Remove the thermal pad 12 Remove the IO board 13
  • Dell Vostro 3582 | Service Manual without optical drive - Page 79
    17 Remove the display hinges 18 Remove the power adapter port 19 Remove the system board About this task After performing the preceding steps, you are left with the palmrest and keyboard assembly. Removing and installing components 79
  • Dell Vostro 3582 | Service Manual without optical drive - Page 80
    Troubleshooting ePSA is embedded with the BIOS and is launched by the BIOS internally. The embedded system error messages that inform you of problems encountered during testing NOTE: Some the error code and validation number and contact Dell. System diagnostic lights Battery-status light Indicates the
  • Dell Vostro 3582 | Service Manual without optical drive - Page 81
    and press F12 when the Dell logo is displayed on the screen. 6 Boot to the USB drive from the One Time Boot Menu. 7 Type the BIOS setup program filename and press Enter. 8 The BIOS Update Utility appears. Follow the instructions on the screen to complete the BIOS update. Troubleshooting 81
  • Dell Vostro 3582 | Service Manual without optical drive - Page 82
    BIOS: Steps 1 Turn on your computer. 2 Go to www.dell.com/support. 3 Click Product support, enter the Service Tag of your computer, and then click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually following procedure provides the instructions on how to conduct
  • Dell Vostro 3582 | Service Manual without optical drive - Page 83
    options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1 Go to Dell.com/support. 2 Select your support category. 3 Verify your country or region in the Choose a Country
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Vostro 3582
Service Manual (without optical drive)
Regulatory Model: P75F
Regulatory Type: P75F011