Dynex DX-E401 Installation Guide (English)
Dynex DX-E401 - EN Broadband Router Manual
 |
UPC - 790069265495
View all Dynex DX-E401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dynex DX-E401 manual content summary:
- Dynex DX-E401 | Installation Guide (English) - Page 1
4-Port Cable/DSL Router Product Name [French] Product Name [Spanish] DX-E401 INSTALLATION GUIDE GUIDE DE GUÍA DEL __________ - Dynex DX-E401 | Installation Guide (English) - Page 2
2 Contents Dynex 4-Port Cable/DSL Router This product can be set up using any current web browser, such as Internet Explorer 6 or Netscape Navigator 6.2.3. PACKAGE CONTENTS: • DX-E401 4-port cable/DSL router • CD (containing manual and warranty) • Ethernet straight-through cable • 5V 2A DC power - Dynex DX-E401 | Installation Guide (English) - Page 3
located on the Cable/DSL modem. 4 Turn on the Cable/DSL modem by turning on the unit or plugging in the power adapter. 5 Connect the other end of the Ethernet cable to the WAN PORT on the back of the router. The WAN LED will turn on to indicate that it is connected to a broadband modem. If the - Dynex DX-E401 | Installation Guide (English) - Page 4
4 Connecting additional computers to the router Connecting additional computers to the router Using additional Ethernet (CAT-5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back of the router. The front of your router should indicate the following - Dynex DX-E401 | Installation Guide (English) - Page 5
the Setup Wizard 8 We recommend configuring the router with the same computer that is connected to your modem. The router acts as a DHCP server and will assign all the necessary IP address information on your network. See the Appendix at the end of this Quick Installation Guide or the User Guide on - Dynex DX-E401 | Installation Guide (English) - Page 6
Using the Setup Wizard 2 Type admin for the username, leave the password field blank, then click OK. The Home screen opens. 3 Click Run Wizard, then click Next. The Setup Wizard opens. 4 Click Next. The Set Password screen opens. 5 Follow the instructions on the screen to set a new password, then - Dynex DX-E401 | Installation Guide (English) - Page 7
from the list, then click Next. • If you selected Dynamic IP Address (used primarily for cable Internet service), go to Step 8. • If you selected Static IP Address, go to Step 10. • If you selected PPP over Ethernet (used mainly for DSL Internet service), go to Step 12. If you are not sure which - Dynex DX-E401 | Installation Guide (English) - Page 8
8 Using the Setup Wizard 8 If you selected Dynamic IP Address, the Set Dynamic IP Address screen opens. 9 Click the Clone MAC Address button to automatically copy the MAC address of the network adapter in your computer, or manually type in the MAC address, then click Next to continue, then go to - Dynex DX-E401 | Installation Guide (English) - Page 9
the Setup Wizard 9 11 Enter the IP address information provided to you by your ISP. Complete all the required fields, then click Next. Go to step 14. 12 If you selected PPPoE (Point-to-Point Protocol over Ethernet), the Set PPPoE screen opens. Remove any existing PPPoE client software installed - Dynex DX-E401 | Installation Guide (English) - Page 10
the web management interface, or to the User Guide located on the CD. Configuring your network adapter To connect to the network, make sure that the network adapter in your computer is configured properly. To configure your network adapter to obtain an IP address automatically in Windows XP: 1 Click - Dynex DX-E401 | Installation Guide (English) - Page 11
Appendix 11 3 Click Properties, then click Internet Protocol (TCP/IP). 4 Click Properties, select Obtain an IP address automatically, then click OK. 5 Restart your computer. - Dynex DX-E401 | Installation Guide (English) - Page 12
12 Appendix To configure your network adapter to obtain an IP address automatically in Apple Macintosh OS X: 1 Go to the Apple menu, then click System Preferences. 2 Click Built-in Ethernet in the Show list, then select Using DHCP in the Configure list. - Dynex DX-E401 | Installation Guide (English) - Page 13
Warranty 13 The IP address information, the subnet mask, the router's IP address, and the Ethernet adapter address appears. 3 Click Apply Now. Warranty Dynex warrants that for 1 year from date of purchase as stated on your receipt, it will replace this product if found to be defective in materials - Dynex DX-E401 | Installation Guide (English) - Page 14
14 Technical support Technical support Dynex provides free technical support for customers within the United States for the duration of the warranty period on this product. Dynex Support via telephone: Call Toll Free (800) 305-2204 Dynex Support via Internet: Visit www.dynexproducts.com - Dynex DX-E401 | Installation Guide (English) - Page 15
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
INSTALLATION GUIDE
GUIDE DE __________ • GUÍA DEL __________
4-Port Cable/DSL Router
Product Name [French]
Product Name [Spanish]
DX-E401