Dynex DX-HTVMM1703-C User Guide

Dynex DX-HTVMM1703-C Manual

Dynex DX-HTVMM1703-C manual content summary:

  • Dynex DX-HTVMM1703-C | User Guide - Page 1
    Full Motion Mount for TVs 47" - 70" DX-HTVMM1703-C For VESA patterns: • 7.9 × 7.9" (200 × 200 mm) • 11.8 × 7.9" (300 × 200 mm) • 11.8 × 11.8" (600 × 400 mm) For wood-stud or concrete wall installations USER GUIDE Before using your new product, please read these instructions to prevent any damage.
  • Dynex DX-HTVMM1703-C | User Guide - Page 2
    DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" Safety information and specifications IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS CAUTION: Do not use this product for any purpose not explicitly specified by Dynex contact Customer Service or call a qualified contractor. Dynex is not
  • Dynex DX-HTVMM1703-C | User Guide - Page 3
    3 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" Tools needed You will need the following tools to assemble your new TV wall mount: Phillips screwdriver Edge-
  • Dynex DX-HTVMM1703-C | User Guide - Page 4
    4 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" TV Hardware Bag Label A1 A2 A3 Hardware M4 × 12 mm screw M4 × 30 mm screw M5 × 12
  • Dynex DX-HTVMM1703-C | User Guide - Page 5
    5 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" Installation instructions STEP 1 - Determine whether your TV has -top stand attached, remove the stand. See the documentation that came with your TV for instructions. 3 Lay the TV brackets, oriented vertically, on the back of your TV. 4 Align
  • Dynex DX-HTVMM1703-C | User Guide - Page 6
    6 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 2 - Select screws, washers, and Screw fits brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer correctly combination to accommodate your TV. Using hardware that
  • Dynex DX-HTVMM1703-C | User Guide - Page 7
    7 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Align the left and right TV brackets
  • Dynex DX-HTVMM1703-C | User Guide - Page 8
    8 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs 1 Place spacers (A11) over the
  • Dynex DX-HTVMM1703-C | User Guide - Page 9
    9 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 4 - Determine the wall-mount location Note: • For more detailed information on determining where to drill your holes,
  • Dynex DX-HTVMM1703-C | User Guide - Page 10
    10 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 5 - Option 1: Installing on a wood stud* wall Note: Any drywall covering the wall must not exceed 5/8 in. (16
  • Dynex DX-HTVMM1703-C | User Guide - Page 11
    11 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 5 - Option 2: Installing on a solid concrete or concrete block wall CAUTION: To prevent property damage or personal injury,
  • Dynex DX-HTVMM1703-C | User Guide - Page 12
    12 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 6 - Secure the TV to the wall plate 1 Holding the TV with the top of the screen tilted
  • Dynex DX-HTVMM1703-C | User Guide - Page 13
    13 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 7 - Manage cables • Thread cables for attached devices along the mounting arm, then snap the popper buttons over the cables to hold them in place. Popper button Cables
  • Dynex DX-HTVMM1703-C | User Guide - Page 14
    14 DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" STEP 8 - Adjust the mount arm and tilt anlges 1 To adjust the arms' tension (to make the arm easier
  • Dynex DX-HTVMM1703-C | User Guide - Page 15
    DX-HTVMM1703-C Full Motion Mount for TVs 47" - 70" One-year limited warranty - Dynex Definitions: The Distributor* of Dynex branded products warrants to you, the original purchaser of this new Dynex To obtain warranty service, in the not cover: • Customer instruction/education • Installation •
  • Dynex DX-HTVMM1703-C | User Guide - Page 16
    1-800-305-2204 www.dynexproducts.com DYNEX is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2016 Best Buy. All rights reserved Made in China V2 ENGLISH 16-0713
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Full Motion Mount for TVs 47" - 70"
DX-HTVMM1703-C
USER GUIDE
Before using your new product, please read these instructions to prevent any damage.
For wood-stud or
concrete wall
installations
For VESA patterns:
7.9 × 7.9" (200 × 200 mm)
11.8 × 7.9" (300 × 200 mm)
11.8 × 11.8" (300 × 300 mm)
15.7 × 7.9" (400 × 200 mm)
15.7 × 11.8" (400 × 300 mm)
15.7 × 15.7" (400 × 400 mm)
19.7 × 15.7" (500 × 400 mm)
23.6 × 15.7" (600 × 400 mm)