Edimax ES-5808PHG Datasheet

Gigab

The Edimax ES

‐

5808PHG is an 8

‐

port gigabit rack

‐

mount switch

connections in medium to large network environments. Its stan

with the most widely used mounting systems on the market. Th

network environment’s performance and efficiency.

Complies with the IEEE 802.3at Power over Ethernet (PoE+) Sta

The ES

‐

5808PHG features 8 IEEE 802.3at Power over Ethernet (P

port It can convert standard 90 260V AC electricity into low vol

port. It can convert standard 90

‐

260V AC electricity into low

‐

vol

network accessories via existing LAN cables. With PoE detection

connected device is IEEE 802.3af compliant. In the event that a

transmitted through the LAN cable. The ES

‐

5808PHG can be use

cameras, or VoIP devices. It is the best solution for network env

Compliant with Cat 5 Ethernet Cables for Higher Cost Efficiency

The ES

‐

5808PHG can transmit both power and network data via

t

ki

bl

d

t

f

PE

networking cables or power adapters are necessary for PoE app

cost of establishing a sturdy network environment.

Features Power Budget UI for Easy Management of PoE Device

The ES

‐

5808PHG features an innovative power budget UI that a

PoE port as well as the total power consumption of those device

monitor the whole PoE network and assess the total power usag

architecture. The power budget UI also features a remote on/of

IT manager does not need to unplug and plug the network line m

manager can reset the PoE device remotely in seconds.

Smart Tools for Improved Network Efficiency

The ES

‐

5808PHG features smart QoS/CoS and network monitor

security and management features include bandwidth control a

Through its web

‐

based interface, an administrator can set up VL

QoS, and configure link aggregation settings to create fat traffic

Spanning Tree to detect and break unintentional cabling loops w

on the network edge. Best of all, the password

‐

protected config

ES-5808PHG

it 8

‐

Port PoE+ Web Smart Switch

with 8 PSE/PoE ports. It is designed for sturdy network

dard 19

‐

inch rack

‐

mount brackets allow for perfect integration

he Edimax ES

‐

5808PHG is truly a superb choice to boost your

andard

PoE+) ports, which supplies up to 30 watts of electricity per

ltage DC electricity to power IEEE 802 3at/af compliant

ltage DC electricity to power IEEE 802.3at/af compliant

n capability, the ES

‐

5808PHG is able to verify whether the

PoE device is not detected, only network data will be

ed with different PoE products, such as access points, network

vironments where power outlets are difficult to access.

y

a Cat 5 Ethernet cables. With the ES

‐

5808PHG, no special

li

ti

Th

ES 5808PHG

d

th

diffi

lt

ti

d

plications. The ES

‐

5808PHG reduces the difficulty, time, and

es

llows IT managers to monitor the power consumption on each

es connected to the ES

‐

5808PHG. IT managers can easily

ge before adding new PoE devices to the PoE network

ff function for each PoE port. When one PoE device hangs, the

manually. Simply by clicking the power on/off button, the IT

ing tools that allow for improved network efficiency. Its

and VLAN (IEEE 802.1Q VLAN tagging and port

‐

based VLAN).

LANs to segregate traffic, prioritize mission

‐

critical data with

pipelines. In addition, the ES

‐

5808PHG also supports Rapid

within the network. All of these features offer extra protection

guration interface can be accessed remotely.

Edimax ES-5808PHG Datasheet

Edimax ES-5808PHG Manual

Edimax ES-5808PHG manual content summary: