Home » Edimax Manuals » Webcams » Edimax IC-3030iPoE » Manual Viewer

Edimax IC-3030iPoE Manual

View all Edimax IC-3030iPoE manuals

Add to My Manuals
Save this manual to your list of manuals

Edimax IC-3030iPoE manual content summary:

Edimax IC-3030iPoE | Manual - Page 1
Edimax IC-3030iPoE | Manual - Page 2
servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax to the user manual on the CD-ROM. The software and specifications Edimax products are distributed without any warranty and are subject to the copyrights of their respective authors. The firmware
Edimax IC-3030iPoE | Manual - Page 3
CONTENTS Chapter I: Familiar with your Internet IP Camera 4 1.1 Package Contents 4 1.2 Basic Introduction 5 1.3 Product Highlights 6 1.4 Familiar with Key Components 7 1.5 Descriptions for LED Indicators 11 1.6 Camera Installation 12 1.7 Locate the IP Address of this IP Camera 13 1.8 Using
Edimax IC-3030iPoE | Manual - Page 4
Zoom-out 102 3-8 PTZ ...103 3-9 Snapshot...104 3-10 Recording 105 3-11 Video Playback 106 Chapter IV: Appendix 107 4.1 Specification 107 4.2 Troubleshooting 108 4.3 Obtain a free Dyndns account 111 4.4 Use this IPCAM with a router or firewall 117 4.4.1 Setup Dyndns Dynamic IP address Mapping
Edimax IC-3030iPoE | Manual - Page 5
. Item Name 1 IP Camera 2 Antenna(wireless model only) 3 Power Adapter 4 Ethernet Cable 5 Driver and User Manual CD-ROM 6 Accessory kit 7 Quick Installation Guide Quantity 1 □ 1 □ 1 □ 1 □ 1 □ 1 □ 1 □ System Requirements • Computer with Windows® 7, Vista or XP • PC with dual core or
Edimax IC-3030iPoE | Manual - Page 6
video from anywhere in the world where Internet access is available. If you have problem installing a new cable from the place the camera is installed to your monitoring computer, don‟t worry! This IP camera also supports wireless network, that is, you can link to this camera wirelessly! You only
Edimax IC-3030iPoE | Manual - Page 7
-in real-time clock, date and time information will be recorded with every captured picture / video clip (also supports auto time synchronization via network time protocol). Upgradeable firmware. Supports up to 16 users, and you can set different password to different user. Usage and event logging
Edimax IC-3030iPoE | Manual - Page 8
1.4 Familiar with Key Components Front View LAN LED WLAN LED Power LED Light Sensor IR LED Camera Focus Ring LAN LED: Indicates LAN activity WLAN LED: Indicates Wireless LAN activity (only work on wired model plugged with USB WiFi dongle and wireless model) Power LED: Indicates power status IR
Edimax IC-3030iPoE | Manual - Page 9
Top View Wired model USB Port POE model SD Card Slot Wireless model Antenna SD Card Slot: Accepts SD / SD-HC memory card for image / video storage USB Port: Connects to certain wireless module. Antenna Base: Connects to supplied antenna 8
Edimax IC-3030iPoE | Manual - Page 10
Bottom View Ethernet Connector Reset to Default /WPS Power Connector Microphone Audio Connector WPS: click the button on IP Cam and click it on the AP you want to connect wireless connection.(works on wired model with USB wifi dongle plugged or wireless model) Reset to Default Button: Press and
Edimax IC-3030iPoE | Manual - Page 11
Back View Tripod Connector: Connects to any standard tripod / camera wall holder. MAC Address Label: Shows the MAC address of this IP camera. Useful when you can‟t locate the camera on the network. 10
Edimax IC-3030iPoE | Manual - Page 12
1.5 Descriptions for LED Indicators LED Name Power LAN WLAN Status Off On Off On Flash Off On Flash at low speed Flash Description Camera is not powered (camera off) Camera is correctly powered (camera on) LAN port not in use LAN port in use Transferring data via LAN port Wireless LAN not in use
Edimax IC-3030iPoE | Manual - Page 13
1.6 Camera Installation Please follow the following instructions to set your IP camera up. 1. Unpack the product package and check if anything‟s camera) to secure the camera. 6. Launch Internet Explorer on your computer, and following the instructions given in next section to set the IP camera. 12
Edimax IC-3030iPoE | Manual - Page 14
1.7 Locate the IP Address of this IP Camera Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this IP camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your computer is not
Edimax IC-3030iPoE | Manual - Page 15
2. Double-click „Network Connections‟ icon. 3. Right-click „Local Area Connection‟, and click „Properties‟. 14
Edimax IC-3030iPoE | Manual - Page 16
4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟. 15
Edimax IC-3030iPoE | Manual - Page 17
5. In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a value greater than 2 and less than 254 (You can use the example in the picture „192.168.2.339‟). In Subnet mask field, please fill „255.255.255.0‟. Please keep all other fields empty, and click „OK‟. If
Edimax IC-3030iPoE | Manual - Page 18
connect to the camera by the instructions given in last chapter, you steps below to run the Install Wizard to guide you quickly through the Installation process. The program should be executed automatically. If not, run "Autorun.exe" manually from "Autorun" folder in the CD. 2. The Install Wizard
Edimax IC-3030iPoE | Manual - Page 19
3. Click „Next‟ to start install camera admin software: 4. You can change the installation folder of camera setup software here, click „Browse‟ to select an existing folder, or you can just click „Next‟ to use default installation folder: 18
Edimax IC-3030iPoE | Manual - Page 20
5. If you wish to create desktop icon and / or quick launch icon for camera admin software, please check corresponding box, and click „Next‟ to continue. 6. You‟ll see a brief of all options you selected, click „Install‟ to install camera admin software now, or click „back‟ to back to previous steps
Edimax IC-3030iPoE | Manual - Page 21
7. When you see this message, the installation of camera admin software is complete. If you wish to launch camera admin software now, keep „Launch IP Cam Admin Utility‟ box checked, and click „Finish‟ to close installation utility. After the camera admin software is launched, all cameras found on
Edimax IC-3030iPoE | Manual - Page 22
by web browser, double-click the camera listed here. The camera admin software also provides several functions: Language change: This camera admin software supports 3 languages: English, Chinese, and Japanese. You can select the language you wish to use from language dropdown menu located at upper
Edimax IC-3030iPoE | Manual - Page 23
configure camera‟s network settings. Select „DHCP‟ to set the camera to obtain an IP address from DHCP server on local area network automatically, and select „Manual IP‟ to input the IP address information manually. Click „OK‟ to save settings. 22
Edimax IC-3030iPoE | Manual - Page 24
In „Security‟ page, you can change the camera‟s name and password (user name is always „admin‟ and cannot be changed). You have to input the same password in both „New Password‟ and „Confirm Password‟ field, or you‟ll be prompted to input new password again. Click „OK‟ to save settings or click „
Edimax IC-3030iPoE | Manual - Page 25
1.9 Log Onto Web Management Interface Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer and type the IP address of the IP camera in address bar of Internet Explorer. You should be prompted to input the user name and password: Default user name is „
Edimax IC-3030iPoE | Manual - Page 26
If this is the first time you log onto web management interface, you‟ll be prompted to install ActiveX Plugin: When you see this message, please click „OK‟, and click „Download the latest ActiveX‟ link to download plugin so you can use this camera: Click „Run‟ to download plugin: 25
Edimax IC-3030iPoE | Manual - Page 27
Click „Run‟ to install plugin: Please click „Next‟ button to start installation (click „Next‟ or „Install‟ when you‟re prompted, until installation is complete). 26
Edimax IC-3030iPoE | Manual - Page 28
Click „Finish‟ to complete plugin installation. Now you can go back to web browser, and you should be able to see the image captured by camera (You may need to press F5 or CTRL-R to reload web page). 27
Edimax IC-3030iPoE | Manual - Page 29
Note: If you see one of these messages (or both): OR Your computer may not have the display capability that this IP camera requires, or you don't have Microsoft DirectX® installed. Please download Microsoft DirectX® from Microsoft's website (http://www.microsoft.com), and try again. In some cases,
Edimax IC-3030iPoE | Manual - Page 30
Chapter II: Using Web Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and this is the only menu you can see the real-time image from camera. You can always back to this menu by clicking „Camera‟ on the top of web management
Edimax IC-3030iPoE | Manual - Page 31
The descriptions of every setting in this menu will be given below: Item Video Type Frequency Flip Mode Brightness / Saturation / Sharpness Volume Description Specifies video encoding type. Available options are „MPEG4‟, „MJPEG‟, and „H.264‟. Different encoding type requires different bandwidth,
Edimax IC-3030iPoE | Manual - Page 32
can change the directory by clicking the text input box located at the right of „Snapshot‟ button: Recording Speak to IP Cam Digital Zoom and you‟ll be prompted to select a new directory. Press this button to record the displaying image as a video file in AVI format, and you can play the video
Edimax IC-3030iPoE | Manual - Page 33
mode (uses all available space to display the image captured by this camera). *Please note: If you‟re not using Microsoft Internet Explorer as web browser, some functionalities may not work properly. 32
Edimax IC-3030iPoE | Manual - Page 34
2.2 Video You can change video-related settings of this IP camera in „Video‟ menu. You can access this menu by clicking „Video‟ on the top of web management interface. There are 5 types of video settings for this IP camera. To set the option of a certain video setting, put mouse cursor on it and its
Edimax IC-3030iPoE | Manual - Page 35
2.1.1 MJPEG You can adjust video settings when you select „MJPEG‟ as video type in „Camera‟ menu. The descriptions of every setting in this menu will be given below: Item Video Resolution Video Quality Frame Rate Description Changes the resolution of video. Available options are 1280 x 1024, 640
Edimax IC-3030iPoE | Manual - Page 36
2.1.2 MPEG4 You can adjust video settings when you select „MPEG4‟ as video type in „Camera‟ menu. The descriptions of every setting in this menu will be given below: Item Video Resolution Video Quality Frame Rate Description Changes the resolution of video. Available options are 1024 x 768, 640 x
Edimax IC-3030iPoE | Manual - Page 37
2.1.3 H.264 You can adjust video settings when you select „H.264‟ as video type in „Camera‟ menu. The descriptions of every setting in this menu will be given below: Item Video Resolution Video Quality Frame Rate Description Changes the resolution of video. Available options are 1280 x 1024, 640
Edimax IC-3030iPoE | Manual - Page 38
2.1.4 OSD If you need to display information about this camera, like camera‟s name or current date / time, you can use OSD (On-Screen Display) menu: The descriptions of every setting in this menu will be given below: Item On-Screen Display Show Camera Name Show Date Show Time Description Select „
Edimax IC-3030iPoE | Manual - Page 39
2.1.5 Night Vision This camera equips with 10 IR LEDs to enhance video quality in the night. You can enable or disable IR LEDs by „Night Vision‟ menu: The descriptions of every setting in this menu will be given below: Item Alaways** turn off IR led Alaways** turn on IR led Auto mode Turn on/off
Edimax IC-3030iPoE | Manual - Page 40
„Network‟, network setting menu will appear. There are 6 sub-menus available here: Please click the network setting you wish to set, and then refer to instructions given below: 39
Edimax IC-3030iPoE | Manual - Page 41
2.2.1 LAN You can define IP address and select the port number you wish to use here. 40
Edimax IC-3030iPoE | Manual - Page 42
The descriptions of every setting in this menu will be given below: Item Network Type Description This camera can obtain the IP address from DHCP server automatically (if you have one), or set a fixed IP address. Select „DHCP‟ to obtain IP address automatically or „Static IP Address‟ to assign
Edimax IC-3030iPoE | Manual - Page 43
performance. Click „Apply‟ to save settings and make the new settings take effect. 42
Edimax IC-3030iPoE | Manual - Page 44
2.2.2 WLAN The descriptions of every setting in this menu will be given below: Item Wireless Connection Network Type Description Select „Enable‟ to activate wireless network function of this IP camera, select „Disable‟ to disable it. Select the network type of wireless connection. Available
Edimax IC-3030iPoE | Manual - Page 45
Available Networks point). You can set to „Adhoc‟ when you don‟t have any wireless access point, but your computer has wireless network card. Set to „Infrastructure‟ when you have wireless access point, and you have computers with wired network connection. Here shows all wireless access points
Edimax IC-3030iPoE | Manual - Page 46
SSID Channel Wireless Key Self PinCode Configure via Push Button Configure via PinCode Input the SSID of the wireless access point you wish to connect. It should be less than 32 alphanumerical characters. When you select a wireless access point above, it‟s SSID will be filled in this field
Edimax IC-3030iPoE | Manual - Page 47
to apply for an account at dyndns.org (http://www.dyndns.org). Detailed instructions of how to apply a new account can be found on dyndns.org‟s this IP camera, select „Disable‟ to disable it. Select dynamic DNS service provider here. Only dyndns.org is available currently. Input dynamic DNS host
Edimax IC-3030iPoE | Manual - Page 48
2.2.4 UPnP When UPnP function is activated, all UPnP-compatible computers / network devices will be able to discover this IP camera automatically (only those in the same local network). This function is useful and you don‟t have to remember the IP address of this IP camera. Simply open „Network
Edimax IC-3030iPoE | Manual - Page 49
Click the message to open „My Network Places‟, and you‟ll see the IP camera: You can double-click the icon to launch Internet Explorer and log onto IP camera‟s web management interface directly. 48
Edimax IC-3030iPoE | Manual - Page 50
2.2.5 LoginFree This camera provides a method to let unauthorized users to view the image captured by this camera, which is called as „LoginFree‟. When you wish to let everyone to view the image captured by this camera, or integrate the image with your own web application, you can use this function:
Edimax IC-3030iPoE | Manual - Page 51
2.2.6 RTSP If you want to watch video captured by this IP camera by your own RTSP (Real Time Streaming Protocol) media player, you can use this function to setup RTSP parameters, so your RTSP-compatible player will be able to receive video data. The descriptions of every setting in this menu will
Edimax IC-3030iPoE | Manual - Page 52
2.3 Motion Detection When you wish to use this camera to monitor the activities, motion detection function will be very useful. Camera will detect the motion in captured image, and take a snapshot when motion is detected. So you can use this camera to keep the safety of the belongings you have. To
Edimax IC-3030iPoE | Manual - Page 53
2.3.1 Motion Detection You can use this menu to setup basic motion detection settings: The descriptions of every setting in this menu will be given below: Item Description Enable Motion Select „Enable‟ to enable motion detection, and select Detection „Disable‟ to disable this function. Motion
Edimax IC-3030iPoE | Manual - Page 54
Input the maximum file size of saved file in Mbytes. Maximum file size is 100. Select „Enable‟ to save file to a network folder which supports SAMBA (also known as „Windows Network Neighborhood‟), select „Disable‟ to disable this function. If username and password are not required to write files in
Edimax IC-3030iPoE | Manual - Page 55
2.3.2 Motion Region You can define the motion detection region within the image that camera captures, so this camera will ignore motions which are not covered by the motion region setting, and reduce the chances of false alarm. The descriptions of every setting in this menu will be given below:
Edimax IC-3030iPoE | Manual - Page 56
Sensitivity Refresh Save Move the slide bar to change the motion detection sensitivity setting: Drag the slide to the right to increase sensitivity (camera will detect minor changes in the image), and drag the slide to the left to decrease sensitivity (camera will only detect major changes in the
Edimax IC-3030iPoE | Manual - Page 57
2.3.3 Email You can define the destination address of E-mail sending and mail server parameters here. The descriptions of every setting in this menu will be given below: Item Recipient E-Mail Address E-Mail Subject SMTP Server Description Input the email recipient‟s Email address here. Specify
Edimax IC-3030iPoE | Manual - Page 58
User Name Password select „Disable‟ to disable it. If you don‟t know, please refer to the SMTP server you‟re using in your Email software (like Outlook, Outlook Express etc.), or ask your network administrator or ISP. Please input the user name of SMTP server here, if your SMTP server requires the
Edimax IC-3030iPoE | Manual - Page 59
2.3.4 FTP Configuration You can set FTP server‟s parameters here. The descriptions of every setting in this menu will be given below: Item FTP Server FTP Port User Name Password Remote Folder Description Input the IP address or host name of the FTP server you wish to use here. Input the port
Edimax IC-3030iPoE | Manual - Page 60
found that non-passive mode is not working, you can try to use passive mode. Click „Apply‟ to save settings and make the new settings take effect. After that, you can click „Upload a test file‟ to send a file to the FTP server you set here, so you can make sure the setting you specified here is
Edimax IC-3030iPoE | Manual - Page 61
2.3.5 SD Card Configuration You can define the filename and destination folder when saving a file in SD card. The descriptions of every setting in this menu will be given below: Item Enable Cycle Recording File Name Prefix Destination Folder Description Check this box and this camera will
Edimax IC-3030iPoE | Manual - Page 62
2.4 System Info You can use this menu to get the operational information of this camera: After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Detailed descriptions of every setting will be given below. 61
Edimax IC-3030iPoE | Manual - Page 63
identify your camera on the network when you have more than one IP camera in the same network. Password Confirm Password Default name begins with „IC-„ plus the last 6 characters of the MAC address of this IP camera. You can modify the name to the one you can remember and meaningful
Edimax IC-3030iPoE | Manual - Page 64
Setting This setting allows you to change the date and time of the real time clock in this IP camera. You can set the time manually, or use network time protocol (NTP) to set the time automatically. The descriptions of every setting in this menu will be given below: Item Set
Edimax IC-3030iPoE | Manual - Page 65
Time Synchronize to PC time „Yes‟; otherwise select „No‟. Click to input current time of your computer to „Set Date / Time manually‟ field. Click „Apply‟ to save settings and make the new settings take effect. If you wish to use the date and time setting of the
Edimax IC-3030iPoE | Manual - Page 66
on your computer‟s hard drive and you can upload the firmware file to the IP camera later. After you selected a proper firmware file from your computer, click „Upgrade Firmware‟ button to start upgrade. DO NOT DISCONNECT NOW! If the firmware file you provided is invalid of you didn‟t provide the
Edimax IC-3030iPoE | Manual - Page 67
Reboot Device LED Setting setting of your computer if the IP address of your computer does not begin with '192.168.2', and subnet mask is not '255.255.255.0', or you'll not be able to connect to this IP camera again. If you found the IP camera is responding slowly or behaves strange, you can click
Edimax IC-3030iPoE | Manual - Page 68
2.4.4 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information. 67
Edimax IC-3030iPoE | Manual - Page 69
can give them user-level user name and password, so they can only view the image and can not change any system setting. This camera supports up to 16 users. After you selected „Account‟, you‟ll be prompted to input user account information: The descriptions of every setting in this menu
Edimax IC-3030iPoE | Manual - Page 70
Modify Remove Modify an existing user‟s information. You have to select a user from user list first. Remove an existing user. You have to select a user from user list first. Click „Apply‟ to save settings and make the new settings take effect. Please note: only one user (including administrator)
Edimax IC-3030iPoE | Manual - Page 71
2.6 SDHC ... After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Please click the SD card setting you wish to set then refer to instructions given below: 70
Edimax IC-3030iPoE | Manual - Page 72
2.5.1 Status Here shows the remaining card space for you. 71
Edimax IC-3030iPoE | Manual - Page 73
2.5.2 Space Alarm When you‟re using SD card to store captured image and video clip, you can have this camera to send an E-mail to you when there‟s only little remaining space left on SD card. Please note: If you have set E-mail settings in 'Motion Picture' function, you can click 'Copy Mail Config'
Edimax IC-3030iPoE | Manual - Page 74
reserved and will not be used from dropdown menu. Click „Apply‟ to save settings and make the new settings take effect. You can click „Send a test email‟ button to send a test E-Mail by the configuration you set here. 73
Edimax IC-3030iPoE | Manual - Page 75
2.5.3 File Management You can use this menu to manage the files stored on SD card. The descriptions of every setting in this menu will be given below: Item FirstPage PrevPage NextPage LastPage SelectAll ClearAll Delete Description Jump to first page of file list. Jump to previous page of file
Edimax IC-3030iPoE | Manual - Page 76
functions like video recording, after this software is installed, you can use your IP camera to safeguard your property. Please follow the following instructions to install the surveillance software. 1. Double click the setup file located in „xxx‟ folder in supplied CD-ROM, when the following window
Edimax IC-3030iPoE | Manual - Page 77
3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click „Next‟ to continue. 76
Edimax IC-3030iPoE | Manual - Page 78
4. Here lists all options you chose in previous steps, if everything‟s correct, click „Install‟ to start installing procedure, or click „Back‟ to go back to previous step to modify installing settings. 5. The installing procedure will take some time, please be patient. 77
Edimax IC-3030iPoE | Manual - Page 79
6. When you see this window, it means the software installing procedure is complete. Please click „Finish‟ to finish the procedure (IP camera surveillance software will start after you click „Finish‟ button, if you want to start it later, uncheck „Launch IPCam Surveillance Software‟ box). 78
Edimax IC-3030iPoE | Manual - Page 80
3-2 Using IP camera surveillance software You can click „IPCam Surveillance Software‟ icon from desktop, quick launch bar, or start menu to start the IP camera surveillance software. Before you start: IP camera surveillance software will only work when your monitor's resolution is '1024 x 768'.
Edimax IC-3030iPoE | Manual - Page 81
icon will become white ). Zoom-out (To see more objects). This function is only available for supported cameras. Zoom In Zoom-in (Too see more details). This function is only available for supported cameras. PTZ control Home Recording There are 8 directions in PTZ control ring. If the camera you
Edimax IC-3030iPoE | Manual - Page 82
Playback Playback a recorded video file. Snapshot Take a snapshot of current camera. Message display Close window (stop surveillance) Displays all system messages like camera is disconnected etc. Terminates IP camera surveillance software. Minimize window Minimizes IP camera surveillance
Edimax IC-3030iPoE | Manual - Page 83
3-3 Configure IP camera surveillance software 3-3-1 Configure cameras Before you use this IP camera surveillance software, you must configure the camera(s) you wish to connect. Please click „System configure‟ button and a popup menu will appear: Please select „Configure Cameras‟ to configure cameras
Edimax IC-3030iPoE | Manual - Page 84
3-3-1-1 „Camera‟ tab In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously: Here are the descriptions of all setting items: Item Channel Camera Search Select Refresh Name* Description Select the channel number you wish to set. All cameras
Edimax IC-3030iPoE | Manual - Page 85
. Cancel Discard all settings in this tab. *: It‟s recommended to use „Select‟ button to fill the content of this field. **: Only available for cameras support this function. After you‟ve set all channels you wish to set, click „OK‟ to save settings, and if everything‟s correct, you‟ll see the
Edimax IC-3030iPoE | Manual - Page 86
3-3-1-2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. Here are the descriptions of all setting items: Item Channel One Time Schedules New (One Time Schedules) Description Select the
Edimax IC-3030iPoE | Manual - Page 87
Edit Delete New (Weekly Schedules) Please specify the time duration of this one-time schedule (the date and time of „From‟ and „To‟), then click „OK‟ to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. You can modify a
Edimax IC-3030iPoE | Manual - Page 88
Edit Delete OK Cancel Please check all weekdays that applies, and set the start time in „From‟ field. You can set the duration of video recording in „Period‟ field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in „To‟ field. You can also click „All Time
Edimax IC-3030iPoE | Manual - Page 89
3-3-1-3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by selected camera. Here are the descriptions of all
Edimax IC-3030iPoE | Manual - Page 90
3-3-1-4 Motion Record With this function activated, only motions captured by the camera will be recorded, so you don‟t have to waste hard disk storage space on images you don‟t need to pay attention to. WARNING: For applications that security is highly concerned, it's not recommended to use this
Edimax IC-3030iPoE | Manual - Page 91
when motion is triggered Send mail when motion is triggered OK Cancel camera. Send an email to a pre-defined address when a motion has been detected by the camera. Save settings in this tab. Discard all settings in this tab. 90
Edimax IC-3030iPoE | Manual - Page 92
3-3-2 General Settings You can set system-wide settings of this IP camera surveillance software in this menu. 3-3-2-1 „General‟ tab All general settings like file storage directory and recording spaces can be set here. Here are the descriptions of all setting items: Item Data Directory Free
Edimax IC-3030iPoE | Manual - Page 93
Space Max Video File Size Scan Time Cycle Recording Defines the maximum file size of every video file. When the size of file exceeds this value, IP camera surveillance software will open another file to record the video. Define the time period to pause between every camera switch when you activate
Edimax IC-3030iPoE | Manual - Page 94
3-3-2-2 „E-Mail Setting‟ tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item E-Mail Subject Recipient E-Mail Address New
Edimax IC-3030iPoE | Manual - Page 95
Edit Delete Sender E-Mail Address SMTP Server SMTP port SMTP Auth SMTP Account SMTP Password OK Cancel Select an email address from „Recipient E-Mail Address‟ box, and click „Edit‟ to edit the email address. Delete selected email address. Specify the email address of email sender. Specify the IP
Edimax IC-3030iPoE | Manual - Page 96
3-3-2-3 Security If you don‟t want other people to access this IP camera surveillance software, you can set a password to protect it. You‟ll need to input the password every time you wish to use this IP camera surveillance software: To set password, please use „Security‟ tab in „General Options‟
Edimax IC-3030iPoE | Manual - Page 97
Here are the descriptions of all setting items: Item Enable Disable Password Confirm Password Description Requires password authentication when this software starts. Password authentication is not required when this software starts. Input the password you wish to use here. Input the password you
Edimax IC-3030iPoE | Manual - Page 98
3-4 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly. Layout
Edimax IC-3030iPoE | Manual - Page 99
Layout style 3: 6 Displays the video of up to 6 cameras. Cameras Layout style 4: 8 Displays the video of up to 8 cameras. Cameras Layout style 5: 9 Displays the video of up to 9 cameras. Cameras Layout style 6: Displays the video of up to 10 cameras. 10 Cameras 98
Edimax IC-3030iPoE | Manual - Page 100
Layout style 7: 13 Displays the video of up to 13 cameras. Cameras Layout style 8: 16 Displays the video of up to 16 cameras. Cameras 99
Edimax IC-3030iPoE | Manual - Page 101
3-5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button to switch display mode to full-screen mode. To exit full-screen mode, press „ESC‟ key. 100
Edimax IC-3030iPoE | Manual - Page 102
3-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan sequence (you'll see nothing
Edimax IC-3030iPoE | Manual - Page 103
3-7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope of camera‟s view, or enlarge the
Edimax IC-3030iPoE | Manual - Page 104
pan - tilt function ( but this model doesn‟t support PTZ function), you can change the position that camera points to, to see different places that fall in the scope of camera‟s view. Please select a
Edimax IC-3030iPoE | Manual - Page 105
3-9 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full. 104
Edimax IC-3030iPoE | Manual - Page 106
‟ button: When recording starts, you‟ll see a message displayed in message displaying box like „1/1 10:00:00, Camera 2 Start Manual‟, which means camera 1 starts recording manually on 1/1 at 10:00:00. To stop recording, click „Start Recording‟ button again, and you‟ll see a message displayed in
Edimax IC-3030iPoE | Manual - Page 107
3-11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (
Edimax IC-3030iPoE | Manual - Page 108
simultaneously on PC surveillance software up to 16 cameras at a time Supports 16 additional user accounts for viewing camera Auto sending Snap Shot or video by E-mail or FTP Support DDNS and UPnP functions Supports Windows 2000/XP/Vista/Win7 Firmware Upgradeable EMI & Safety FCC, CE class B 107
Edimax IC-3030iPoE | Manual - Page 109
If the IP camera is not working properly, before you contact the dealer of purchase for help, please check the troubleshooting list here, this may help you to solve the problem by yourself and therefore saves your valuable time. Scenario I can not connect to IP camera Possible Solution a. Please
Edimax IC-3030iPoE | Manual - Page 110
could be caused by a slow Internet connection, and it‟s not a problem caused by camera. However, when the network connection is slow, you to connect to Internet. Ask your ISP or network administrator for detailed instruction. a. Is the network cable or wireless connection disconnected? Please check
Edimax IC-3030iPoE | Manual - Page 111
log, if FTP upload or Email sending is failed, it will be logged, and this may give you some clue on how to solve the problem. e. Change the threshold to a more sensitive setting. I heard strange a. Please check if anything jams the camera, remove sound when I use it. pan / tilt function a. If
Edimax IC-3030iPoE | Manual - Page 112
away from it, you can follow the following steps to obtain a free Dyndns account, which will provide you free IP address to host name mapping service: 1. Launch your web browser and navigate to http://www.dyndns.org 2. Click „Sign In‟ button (located at upper-right corner of dyndns.org‟s webpage
Edimax IC-3030iPoE | Manual - Page 113
3. Click „Create an Account‟ in pop-up menu. 4. Fill all fields appear in this menu, and click „Create Account‟ button to create a new account. You‟ll be prompted if the account you selected is not available. 112
Edimax IC-3030iPoE | Manual - Page 114
5. When you see this image, you‟ll receive an e-mail confirmation at the e-mail box you registered with dyndns.org. 6. Check your e-mail box and you should be able to get confirmation e-mail. Click the link to connect to dyndns.org website and complete registration procedure. If you didn‟t get the
Edimax IC-3030iPoE | Manual - Page 115
7. When you see „Account Confirmed‟ webpage, indicates your dyndns.org account has been confirmed and activated. Now you can click „Create a dynamic DNS host within our Free domains‟ link to continue. 8. Click „Create Hostname‟ button. 114
Edimax IC-3030iPoE | Manual - Page 116
9. In this page: Input the hostname of your choice in „Hostname‟ field, Select a domain name in dropdown menu, Select „Host with IP address‟ for „Service Type‟, Input current IP address in „IP Address‟ field (or click the link below to use detected IP address to fill this field‟. 10. Click „
Edimax IC-3030iPoE | Manual - Page 117
‟ to continue. 13. When you see this message, indicates your free dyndns.org hostname mapping service has been activated. You can go to chapter 2-2-3 to use your dyndns.org username, password, and hostname + domain name to locate your IP camera on
Edimax IC-3030iPoE | Manual - Page 118
describes how to configure your router or firewall device so your IPCAM can work with them. These instructions are based on a commonly-available residential router and these setup techniques should be easy to apply on any other similar devices as well. 4.4.1 Setup Dyndns
Edimax IC-3030iPoE | Manual - Page 119
3. Enable Dynamic DNS function, select „DynDNS‟ as service provider, and fill the information you obtained from Dyndns.org into Domain name, Account, and Password similar field), select „TCP‟ or „BOTH‟ as data type, and input these port numbers for the services you wish to access from Internet: 118
Edimax IC-3030iPoE | Manual - Page 120
of web configuration / view or RTSP, you have to change the port forwarding setting for your router accordingly. 3. If IP CAM is the only one service you wish to access from Internet, you can also use „DMZ‟ function to access IP CAM: Simply fill the IP address of IP CAM and
Edimax IC-3030iPoE | Manual - Page 121
4.5 Using Cellphone as Image Viewer You can use your cellphone to connect to this IP CAM and view captured image. Currently this IP CAM supports iPhone (Apple) and Google Android OS. 4.5.1 iPhone 1. Launch Safari web browser 2. Input IP CAM‟s IP address / host name in safari‟s address bar in the
Edimax IC-3030iPoE | Manual - Page 122
3. Enter user name & password for the Edimax IP camera. By default, user name is admin and password is 1234. 121
Edimax IC-3030iPoE | Manual - Page 123
4. You‟ll see the image of connected camera displayed on upper-left corner of quad-split screen. If you have more than one IP CAM, you can add other 3 IP CAMs to the quad-split screen. Click an unused corner and a yellow square will appear to indicate it‟s being marked, then click „Setting. 5. Input
Edimax IC-3030iPoE | Manual - Page 124
4.6 Windows Vista / Windows 7 UAC Configuration When you attempt to save a snapshot or record video file, you will see UAC (User Account Control) pop-up notification window to restrict you from saving file like below: To avoid this from happening, you can: a. Switch UAC off in control panel (NOT
Edimax IC-3030iPoE | Manual - Page 125
c. Add IP Camera‟s IP address to „Trusted sites‟ in Internet Explorer‟s security setting (RECOMMENDED) Input IP CAM's IP address here! 124
Edimax IC-3030iPoE | Manual - Page 126
d. If you don‟t want to change Internet explorer‟s security setting, you can run Internet explorer as administrator as workaround. 125
Edimax IC-3030iPoE | Manual - Page 127
126

Match case Limit results 1 per page