Epson 975W Quick Setup
Epson 975W Manual
 |
View all Epson 975W manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 975W manual content summary:
- Epson 975W | Quick Setup - Page 1
/2155W/2165W/2245U/2250U/2255U/2265U Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Note: Your product may differ from the illustrations on this sheet, but the instructions are the same. Connect the projector Choose from the following - Epson 975W | Quick Setup - Page 2
image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot - Epson 975W | Quick Setup - Page 3
Close the air filter cover. 7 Plug in the power cord and turn on the projector. 8 Press the Menu button on the remote projector's firmware over a wired LAN, install the EasyMP Network Updater software. Click the icons on your desktop to view the software manuals. See the manuals for instructions - Epson 975W | Quick Setup - Page 4
notice. Toll or long distance charges may apply. Internet support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Registration Register today to
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Note:
Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Computer
USB cable
HDMI cable
VGA cable
3.5 mm stereo mini cable
Computer port
Connect one end of a VGA cable to the projector’s
Computer1
or
Computer2/Monitor Out
port, and the other end to your laptop or
computer’s
monitor port. Make sure to switch your laptop to external
display (see “Troubleshooting” on the back of this sheet). You can also
connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI1/MHL
or
HDMI2
ports and the other end to an HDMI port on your computer.
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista
®
or later:
After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (
EMP_UDSE.EXE
; only
on first connection). If the software screen does not display automatically, open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
OS X 10.7.x or higher:
After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the
Source Search
button on the
projector or the remote control to switch between them.
RCA video cable
(composite video)
Component video to VGA cable
HDMI cable
RCA audio cable
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the
HDMI1
/
MHL
port.
MHL cable
Streaming device
Some devices may require an adapter or may not require an MHL cable. Not
all features or functions may be supported. Check your device’s documentation
for more information.
HDBaseT
™
transmitter (PowerLite 2165W/2265U)
Connect an HDBaseT transmitter to the
HDBaseT
port.
Ethernet cable
Note:
Make sure the projector and HDBaseT transmitter are turned off when
connecting or disconnecting the network cable between them.
Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s
USB-A
(flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you
can use the projector’s PC Free feature. You can also connect other Epson
document cameras to the projector. See the online
User’s Guide
for details.
External monitor and external speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the online
User’s Guide
for
details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The On/Standby light on the projector turns blue.
3
Open the
A/V Mute
slide all the way.
PowerLite
®
975W/2055/2065/2155W/2165W/2245U/2250U/2255U/2265U