Epson BrightLink 436Wi Quick Setup
Epson BrightLink 436Wi Manual
 |
View all Epson BrightLink 436Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson BrightLink 436Wi manual content summary:
- Epson BrightLink 436Wi | Quick Setup - Page 1
BrightLink® 436Wi Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Note: A USB connection is required to use - Epson BrightLink 436Wi | Quick Setup - Page 2
image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot - Epson BrightLink 436Wi | Quick Setup - Page 3
only), insert it into the projector's USB TypeA port, wait for the displayed message, remove the key, and connect it to a USB port on your computer. Follow the on-screen instructions to install the driver, then run your presentation. For details, see the online User's Guide. • If you're not using - Epson BrightLink 436Wi | Quick Setup - Page 4
over the network, download and install the EasyMP Monitor software and manual from the Epson support web site. You can install a link to the downloads page from the projector CD or go to the Epson website, as described on the right. Troubleshooting If you see a blank screen or the No signal
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide
for details.
Note:
A USB connection is required to use interactivity on the computer.
Computer
VGA cable
USB cable
HDMI cable
USB port
Connect the square end of a USB cable to the projector’s
USB
TypeB
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows
®
XP or later:
After turning on the projector, follow the on-screen
instructions to install the Epson USB Display software (
EMP_UDSE.EXE
; only
on first connection).
Note:
If the software screen does not display automatically, open
My
Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
Mac OS X 10.5.8 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Monitor port
Connect one end of a VGA cable to the projector’s
Computer1
or
Computer2
port, and the other end to your computer’s
monitor port. If
you are using a laptop, switch it to external display (see “Troubleshooting”).
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Wireless network
You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n
wireless network. See “Project wirelessly” for instructions.
Wired network
You can connect the projector to your network using an Ethernet
®
cable.
See “Project over a wired network” for instructions.
Video device
Connect up to 5 video devices and use the
Source Search
button on the
projector or remote control to switch between them.
RCA video cable (composite video)
Component video to VGA cable
Audio cable
S-Video cable
Audio cable
HDMI cable
Camera, USB device, or Epson document camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector’s USB
TypeA
(flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s Slideshow feature to project images. See the online
User’s
Guide
for details.
External monitor, external speakers, and microphone
You can also connect an external monitor, external speakers, and a microphone
to your projector to enhance your presentations. See the online
User’s Guide
for
details.
Turn on your projector
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns orange.
3
Press the
power button on the projector or remote control. The
projector beeps, the power
light flashes green, and then stays on.
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
BrightLink
®
436Wi
*412434900*
*412434900*