Epson BrightLink Pro 1430Wi Installation Guide - Ultra-Short Throw Wall Mount
Epson BrightLink Pro 1430Wi Manual
View all Epson BrightLink Pro 1430Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson BrightLink Pro 1430Wi manual content summary:
- Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 1
Installation Guide Guide d'installation - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 2
using the wall mount. Incorrect handling that ignores instructions in this guide could damage the wall mount or could result in personal injury or property damage. Keep this installation guide on hand for future reference. Read the safety instructions in the User's Guide for your projector and - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 3
cable length less than 65 ft (20 meters) to reduce external noise. About This Installation Guide This guide describes how to mount the ultra-short-throw projectors BrightLink Pro 1410Wi, BrightLink 475Wi/ 480i/485Wi, and PowerLite 470/475W/480/485W to a wall using the included EPSON wall mount. 3 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 4
1 Package Contents 2 Specifications 3 Connecting Devices 4 Positioning the Projector 1. Installation worksheet for projecting on a pre-installed wall-mounted board 2. Installation worksheet for projecting on a plain wall 3. Installation measurements in inches 4. Installation measurements in - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 5
wall plate assembly For 3-axis adjustment unit/wall mount installation For slide plate/projector installation For slide plate/3-axis adjustment unit installation (secured when shipped) For wall mount/wall plate installation supplied with the wall mount to install it as directed in this guide. Do not - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 6
Specifications Item Specification Additional information Wall mount weight (including the 3-axis adjustment unit, slide plate, wall plate, wall wall mount arm. Use the included M4 x 12 mm bolts (x6) to attach the separate pieces together before mounting the projector. See page 26 for instructions - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 7
unit to the front or back, you can adjust the installation position of the projector. When the screen size is less than 70 inches, install it at the position marked with a stamp on the mount arm. When the screen size is 70 inches or more, install it at the position marked with a arm. stamp on - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 8
the location where the wall mount is to be installed. Make sure you also have all necessary cables for devices, such as a document camera or microphone, that you will connect to the projector. For details, refer to the User's Guide on the projector CD or at epson.com/ brightlinkdownloads (U.S.) or - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 9
with the BrightLink Pro 1410Wi projector. It provides a convenient alternative to the remote control for turning on the projector, changing the source, and selecting whiteboard mode. You can also use the control pad to capture, print, and save your projected images. You must install the control - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 10
the projector to the control pad, and from the control pad to a computer, thumbdrive, and printer. Optional remote control cable USB USB cable cable USB cable USB cable (not included) For more information on installing and connecting the control pad, see the Control Pad Installation Guide that - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 11
a pre-installed whiteboard or directly onto a plain wall. The height of the included wall mount determines the maximum image size and how high the image appears on the wall or whiteboard. The distance of the projector from the wall (once it is mounted on the adjustable arm of the wall mount) also - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 12
align the center line on the template sheet with the center of the image area. Follow the instructions on page 25 to install the projector. Installation worksheet for projecting on a plain wall 1. Measure the ceiling height (distance from the floor to the ceiling). _____ 2. Determine the desired - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 13
Follow the instructions on page 25 to install the projector. The tables on the following pages provide installation information for all supported image following pages to determine the projection distance and placement of the wall plate. The recommended range for projection distance (a) as shown on - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 14
Diagonal image size and mounting position The numbers on the slider measure (b) are the same as the projection distance (a) when the diagonal image size (S) is 70 inches or more. Because the installation position of the projector changes when (S) is less than 70 inches, the numbers for (a) and (b) - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 15
on the wall mount to the position of the stamp on the wall plate. Base position Stamp on plate Notch on mount arm The measurements may differ depending on the location where you place the projector. When projecting in Tele, the quality of the projected images may decrease. When using BrightLink Pro - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 16
Installation Measurements in Inches for BrighLink Pro 1410Wi, BrightLink 475Wi/485Wi and PowerLite 475W/485W 16 Diagonal image Min. projection distance (a) Slider scale mark (b) Distance from top of image to wall plate (c) Min. ceiling height* Image width (w) 16:9 Widescreen Image height (h) - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 17
height* Image width (w) 16:10 WXGA Image height (h) Min. Slider Distance projection scale from top of distance (a) mark image to (b) wall plate (c) Min. ceiling height* Image width (w) 4:3 XGA Image height (h) Min. projection distance (a) Slider scale mark (b) Distance from top of image - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 18
Installation Measurements in Inches for BrightLink 480i and PowerLite 470/480 18 Diagonal image size (S) Min. ceiling height* Image width (w) 4:3 XGA 16:10 WXGA Image height (h) Min. projection distance (a) Slider scale mark (b) Distance from top of image to wall plate (c) Min. ceiling - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 19
height* Image width (w) 4:3 XGA 16:10 WXGA Image height (h) Min. Slider Distance projection scale from top of distance (a) mark image to (b) wall plate (c) Min. ceiling height* Image width (w) Image height (h) Min. Slider projection scale distance (a) mark (b) Distance from top of image to - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 20
Installation Measurements in MM for BrightLink Pro 1410Wi, BrightLink 475Wi/485Wi and PowerLite 475W/485W 20 Diagonal image size (S) Min. ceiling height* Image width (w) 16:10 WXGA Image height (h) Min. projection distance (a) Slider scale mark (b) Distance from top of image to wall plate - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 21
plate (c) Min. ceiling height* Image width (w) 16:9 Widescreen Image height (h) Min. Projection distance (a) Slider scale mark (b) Distance from top of image to wall plate (c) 77" 2272 1659 1037 168 168 219 2436 1565 1173 231 231 247 2253 1705 959 181 181 278 78" 2288 1680 1050 174 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 22
Installation Measurements in Millimeters for BrightLink 480i and PowerLite 470/480 22 Diagonal image size (S) Min. ceiling height* Image width (w) 4:3 XGA Image height (h) Min. projection distance (a) Slider scale mark (b) Distance from top of image to wall plate (c) Min. ceiling height* - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 23
plate (c) Min. ceiling height* Image width (w) 16:9 Widescreen Image height (h) Min. Projection distance (a) Slider scale mark (b) Distance from top of image to wall plate (c) 75" 2380 1524 1143 189 189 221 2360 1615 1010 219 219 334 2344 1660 934 234 234 394 76" 2398 1544 1158 196 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 24
interactive whiteboard, refer to the table below to identify common models and sizes. If your board is listed here, use the dimensions to reference the installation requirements found on pages 16 to 23. Diagonal size 57 inches 60 inches 63 inches 64 inches 66 inches 71 inches 75 inches 77 inches - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 25
the cable over the wall mount. ❏ Install the wall mount so that it can sufficiently support the weight of the projector and wall mount, and resist any horizontal vibration. Use M8 nuts and bolts. Nuts and bolts smaller than M8 could cause the wall mount to fall. ❏ Epson accepts no responsibility for - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 26
. Attach the slide plate to the projector using the M4 x 12 mm hexagon socket head cap bolts (x4) supplied. Slide plate M4 x 12 mm hexagon socket head cap bolts Spring washer Washer 3. Extend the mount arm to see the stamps that indicate the two positions for mounting the adjustment unit. 26 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 27
English 4. Attach the 3-axis adjustment unit to the wall mount. • Decide which position you want to use for installing the 3-axis adjustment unit. Mount it at the stamp when the image is less than 70 inches (diagonally), or at the when the projected image is 70 inches or more ( - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 28
.5 mm Image Center line of template sheet line of template sheet Center line of projection surface 2. Attach the template sheet to the wall. Caution If you need to install a junction box, you can use the cutout areas in the wall plate for the box. The junction box needs to be recessed into the - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 29
in three places, drill the holes indicated by C in the illustration below. Four mounting holes Three mounting holes Steps 4 to 8 below provide instructions for attaching the wall plate to a concrete wall. 4. Drill holes of the following diameters and depths. Drill diameter Pilot hole depth - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 30
the number for the slider measure (b). 2. Loosen the M4 x 12 mm hexagon socket head cap bolts (x2), and then pull out the slider on the wall mount. Align the slider with the measure (b+x) that is equal to the slider measure (b) plus the thickness of the projection screen (x). M4 x 12 mm hexagon - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 31
1. Insert the hexagonal shaft at the top of the mount arm into the slot on the wall plate ( ). 2. Insert the M8 hexagon bolt at the bottom of the mount arm into the wall plate ( ). Caution Take care not to trap the cables between the mount arm and wall plate. Hexagonal shaft M8 hexagonal bolt 31 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 32
3. Secure the mount arm to the wall plate by tightening the supplied M6 x 20 mm cross recessed head shoulder screws (x3) with the No.3 cross-head screwdriver ( ). M6 x 20 mm cross recessed - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 33
the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal shaft at the top of the wall mount ( ). Start by aligning the notch on the arm with the stamp on the wall plate as shown below. Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it. Tightening the - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 34
Screws (x2) Cable cover If you have the wireless LAN module for your product, install it in the projector following the instructions in the projector User's Guide. 2. Insert the slide plate into the wall mount from the interface side of the projector ( ). Align the 3-axis adjustment unit with the - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 35
/480/485W Power cord Computer cable BrightLink Pro 1410Wi USB cable If you connect more than one computer cable or USB cable to the projector, it is a good idea to label the cables on both ends. If you are planning to run the cables inside the wall, make sure you follow all local - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 36
correction is no more than ±6. A Turn on the projector Using the Remote Control BrightLink 475Wi/480i/485Wi PowerLite 470/475W/480/485W Using the Remote Control BrightLink Pro 1410Wi Using the Control Panel B Display the mount adjustment test pattern, as described below 1. Press the [Help - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 37
at 4:3 aspect ratio. • 16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio images are elongated horizontally to fit. BrightLink Pro 1410Wi, BrightLink 475Wi/485Wi, and PowerLite 475W/485W • Auto: Automatically sets the aspect ratio according to the input signal and the Resolution setting - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 38
1. Slide the air filter cover switch ( ) to open the air filter cover ( ). 2. Use the focus lever to adjust the focus ( ). Focus lever Air filter cover 3. After you finish making the adjustment, close the air filter cover. E Use the adjustment knob on the left side to adjust - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 39
English F Use the adjustment knob on the right side to adjust the horizontal rotation 1. Loosen the screws (x2) in the following illustration ( ). 2. Turn the dark blue knob ( ) to adjust the horizontal rotation ( ). Screws (x2) E J 3. After you finish making all of the adjustments in steps s to , - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 40
bolts (x2). I Adjust the forward/backward slide 1. Loosen the M4 x 12 mm hexagon socket head cap bolts (x2), and then adjust the slider for the wall mount. M4 x 12 mm hexagon socket head cap bolts (x2) E J 2. After you finish making all of the adjustments in steps to , tighten the M4 x 12 mm - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 41
pattern Press the [Esc] button on the remote control or control panel to turn off the test pattern. Warning Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage. 41 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 42
cap If you need to use a security cable, make sure you attach it before installing the wall plate covers. See page 44 for instructions. 1. Attach the wall plate covers ( ). Snap the tabs on the cover into the holes on the wall plate. (If you need to remove the cover, press the tabs.) Depending on - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 43
to the projector User's Guide for instructions on maintenance and repairs. Warning ❏ Never loosen the bolts and nuts after installation. Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them firmly. Otherwise, the projector or wall mount may - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 44
1410Wi, see the online User's Guide. You can install a link to the guide by inserting the BrightLink Pro 1410Wi CD. Or, go to one of the following: U.S.: epson.com/brightlinkdownloads Canada: epson.ca/brightlinkdownloads Attaching a Security Cable If the projector is to be installed in a room where - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 45
de montage et provoquer des blessures corporelles ou des dommages matériels. Suivez les instructions du présent guide pour installer le support de montage. En cas de non-respect des instructions, le support de montage peut tomber et provoquer des blessures corporelles ou des dommages matériels - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 46
et des boulons de taille inférieure à M8, le support de montage risque de tomber. Epson n'accepte aucune responsabilité pour tout dommage ou toute blessure dus à une solidité du mur insuffisante ou une installation inappropriée. L'installation doit être exécutée par au moins deux techniciens qualifi - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 47
l'effet de parasites. À propos de ce guide d'installation Le présent guide décrit comment installer les projecteurs à courte distance de projection BrightLink Pro 1410Wi, BrightLink 475Wi/480i/485Wi et PowerLite 470/475W/480/485W sur un mur à l'aide du support de montage prévu exclusivement à cet - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 48
millimètres 5 Installation du projecteur 71 1. Désassemblez les pièces 2. Assemblez les pièces 3. Installez la plaque murale sur le mur 4. Déterminez la distance de projection et retirez la glissière 5. Faire passer les câbles dans le bras du support de montage 6. Fixez le bras du support de - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 49
montage/plaque murale (fixée à la livraison) • Utilisez les vis ou les boulons fournis avec le support de montage pour installer ce dernier, comme décrit dans le présent guide. Ne leur substituez pas un autre type de boulons. • Vous devez aussi utiliser des pattes de fixation M8 x 50 mm disponibles - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 50
horizontal Information supplémentaire Page de référence Support de montage : 2,8 kg (6,2 lb) po) Réglage à partir de la position d'installation du dispositif de réglage à 3 axes : le montage du projecteur. Consultez la page 72 pour obtenir les instructions. 79 mm (3,1 po) 160 mm (6,3 po) 213 mm - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 51
vers l'avant/l'arrière Plage de réglage du coulissement du bras 248 mm (9,8 po) Réglage à partir de la position d'installation du dispositif de réglage à 3 axes En déplaçant la position d'installation du dispositif de réglage à 3 axes vers l'avant ou l'arrière, vous pouvez régler la position - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 52
emplacement d'installation du support de Guide de l'utilisateur sur le CD du projecteur ou le site Web epson.com/brightlinkdownloads (É.-U.) ou epson.ca/brightlinkdownloads (Canada). Votre produit peut voir une apparence différente de certaines des illustrations de ce guide, mais les instructions - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 53
sortie vidéo de l'ordinateur) Haut-parleurs externes Câble USB (pour les fonctions interactives pour les modèles BrightLink et BrightLink Pro) Microphone Câble audio (non inclus) Caméra de documents (EPSON DC-06) Appareil réseau local Câble USB dédié (fourni avec la caméra de documents) Câble - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 54
projecteur BrightLink Pro 1410Wi . Il offre une alternative à la télécommande pour mettre le projecteur sous tension, changer la source et sélectionner le mode tableau blanc. Vous pouvez aussi utiliser le control pad pour saisir, imprimer et enregistrer vos images projetées. Vous devez installer le - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 55
clé USB ou une imprimante. Câble de télécommande en option Câble Câble USB USB Câble USB Câble USB (non inclus) Pour obtenir plus d'informations sur l'installation et la connexion du control pad, consultez le Guide d'utilisation du control pad fourni avec le projecteur. 55 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 56
pour une image XGA. Les projecteurs BrightLink 480i et PowerLite 470/480 peuvent projeter jusqu'à 93 pouces diagonalement pour une image XGA. Vous pouvez projeter sur un tableau blanc préinstallé ou directement sur un mur ordinaire. C'est la hauteur du support mural qui détermine la taille d'image - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 57
d'image souhaitée (h), trouvez la distance requise entre le sommet de la zone d'image _____ (c) et la plaque murale (c). 9. Déterminez la position pour l'installation de votre projecteur en additionnant les valeurs (f), (h) et (c), en prévoyant 254 mm (10 po) de plus pour la hauteur de la plaque - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 58
la ligne centrale du gabarit avec le centre de la zone d'image. Suivez les directives de la page 71 pour installer le projecteur. Feuille de travail d'installation pour la projection sur un mur ordinaire 1. Mesurez la hauteur du plafond (distance du plancher au plafond). _____ 2. Déterminez le - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 59
centrale du gabarit avec le centre de la zone d'image. Suivez les directives de la page 71 pour installer le projecteur. Les tableaux des pages suivantes fournissent des renseignements d'installation pour toutes les tailles d'image prises en charge. La hauteur de plafond minimum est basée sur une - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 60
mêmes que ceux de la distance de projection (a) lorsque la taille de l'image diagonale (S) est de 70 po ou plus. Parce que la position d'installation du projecteur change lorsque (S) est moins de 70 po, les chiffres pour (a) et (b) sont différents. 70,5 mm (2,8 po) 218 mm (8,6 po) Décalage pour - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 61
dessous. Alignez l'encoche sur la plaque d'installation avec la position du poinçon sur la plaque murale on sur la plaque Encoche sur le bras du support Les mesures peuvent varier selon l'emplacement choisi pour réduite. Lorsque le projecteur BrightLink Pro 1410Wi, BrightLink 475Wi/485Wi ou PowerLite 475W/ - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 62
Mesures d'installation en pouces pour les projecteurs BrighLink Pro 1410Wi, BrightLink 475Wi/485Wi et PowerLite 475W/485W 62 Taille de l'image diagonale (S) Hauteur du plafond min.* 16:10 WXGA Largeur Hauteur Dist. de de de proj. l' - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 63
63 Taille de l'image diagonale (S) Hauteur du plafond min.* 16:10 WXGA Largeur Hauteur Dist. de de de proj. l'image l'image min. (a) (w) (h) Repères de glissière (b) Dist. du haut de l'image à la plaque murale (c) Hauteur du plafond min.* Largeur de l'image (w) 4:3 XGA Hauteur Dist. - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 64
Mesures d'installation en pouces pour les projecteurs BrightLink 480i et PowerLite 470/480 64 Taille de 4:3 XGA l'image Hauteur Largeur Hauteur Dist. de diagonale (S) du plafond de l'image de l'image proj. min. (a) min.* (w) (h) - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 65
Taille de 4:3 XGA l'image Hauteur Largeur Hauteur Dist. de diagonale du de de proj. (S) plafond l'image l'image min. (a) min.* (w) (h) Repères de glissière (b) Dist. du haut de l'image à la plaque murale (c) Hauteur du plafond min.* Largeur de l'image (w) 16:10 WXGA Hauteur Dist. de - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 66
Mesures d'installation en millimètres pour les projecteurs BrighLink Pro 1410Wi, BrightLink 475Wi/485Wi et PowerLite 475W/485W 66 Taille de l'image diag. (S) Haut. du plafond min.* Larg. de l'image (w) 16:10 WXGA Haut. de Dist. de l' - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 67
67 Taille de l'image diag. (S) Haut. du plafond min.* Larg. de l'image (w) 16:10 WXGA Haut. de Dist. de l'image proj. (h) min. (a) Repères de glissière (b) 4:3 XGA Dist. du haut de l'image à la plaque murale (c) Haut. du plafond min.* Larg. de l'image (w) Haut. de l'image (h) Dist. de - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 68
Mesures d'installation en millimètres pour les projecteurs BrightLink 480i et PowerLite 470/480 68 Taille de l'image diag. (S) Haut. du plafond min.* Larg. de l'image (w) 4:3 XGA Haut. de l'image (h) Dist. de proj. min. (a) - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 69
Taille de l'image diag. (S) Haut. du plafond min.* Larg. de l'image (w) 4:3 XGA Haut. de l'image (h) Dist. de proj. min. (a) Repères Dist. du de haut de glissière( l'image à b) la plaque murale (c) Haut. du plafond min.* Larg. de l'image (w) 16:10 WXGA Haut. de l'image (h) Dist. de - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 70
-dessous pour identifier les modèles et tailles communes. Si votre tableau est listé ici, utilisez les dimensions pour référer aux exigences d'installation des pages 62 à 69. Tailles des tableaux blancs interactifs Taille diagonale 16:10 WXGA 4:3 XGA 16:9 grand écran 57 po - PolyVision TS410 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 71
des écrous et des boulons de taille inférieure à M8, le support de montage risque de tomber. ❏ Epson n'accepte aucune responsabilité pour tout dommage ou toute blessure dus à une solidité du mur insuffisante ou une installation inappropriée. A Désassemblez les pièces Retirez la plaque coulissante du - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 72
cylindrique à six pans M4 x 12 mm (x4) fournis. Plaque coulissante Boulons à tête cylindrique à six pans M4 x 12 mm Rondelle élastique Rondelle 3. Allongez le bras du support pour voir les poinçons indiquant les deux positions pour le - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 73
Français 4. Fixez le dispositif de réglage à 3 axes au support de montage. • Choisissez la position selon laquelle vous souhaitez installer le dispositif de réglage à 3 axes. Installez-le au niveau du poinçon lorsque l'image est inférieure à 70 pouces (diagonalement) ou au niveau du poinç - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 74
de la fiche modèle Ligne centrale de la surface de projection 2. Fixez la fiche modèle au mur. Mise en garde Si vous devez installer une boîte de jonction, vous pouvez utiliser les zones de découpes de la plaque murale pour la boîte. La boîte de jonction - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 75
, percez les trous indiqués par C sur l'illustration ci-dessous. Quatre trous de montage Trois trous de montage Les étapes 4 à 8 ci-dessous fournissent les instructions pour fixer la plaque murale à un mur de béton. 4. Percez des trous des diamètres et des profondeurs suivants. Diamètre de per - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 76
la mesure de la glissière (b). 2. Desserrez les boulons à tête cylindrique à six pans M4 x 12 mm (x2), puis retirez la glissière sur le support de montage. Alignez la glissière avec la mesure (b+x) équivalente à la mesure de la glissière (b) plus l'épaisseur de l'écran de projection (x). Boulons - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 77
Français E Faire passer les câbles dans le bras du support de montage 77 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 78
murale 1. Insérez l'arbre hexagonal, sur la partie supérieure du bras du support de montage, dans le logement de la plaque murale ( ). 2. Insérez le boulon à six pans M8, sur la partie inférieure du bras du support de montage, dans de la plaque murale ( ). Mise en garde Veillez à ne pas - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 79
Français 3. Fixez le bras du support de montage à la plaque murale en serrant les vis à épaulement à tête à empreinte cruciforme M6 x 20 mm (x3) fournies à l'aide du tournevis cruciforme n°3 ( ). Vis à épaulement à tête à - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 80
bras 1. Réglez le coulissement vertical à l'aide du boulon à six pans M8 sur la partie inférieure du support de montage, ou de l'arbre hexagonal sur la partie supérieure de la plaque d'installation ( ). Commencez par aligner l'encoche sur le bras avec le poinçon sur la plaque murale tel qu'illustr - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 81
projecteur en suivant les instructions dans le Guide de l'utilisateur du projecteur. 2. Insérez la plaque coulissante dans le support de montage à ( ). Plaque coulissante Côté d'interface du projecteur Positions des boulons Installer le module LAN sans fil Rondelle Rondelle élastique Boulons à tê - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 82
. Cordon d'alimentation Câble d'ordinateur Câble USB BrightLink 475Wi/480i/485Wi et PowerLite 470/475W/480/485W Cordon d'alimentation Câble d'ordinateur BrightLink Pro 1410Wi Câble USB Si vous connectez plus des câbles est disponible en option chez Epson (numéro de pièce : ELPCK01). 82 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 83
475Wi/480i/485Wi et PowerLite 470/475W/480/485W Utilisation de la télécommande pour le projecteur BrightLink Pro 1410Wi Utilisation de la télécommande B Affichez la mire de réglage du support, tel que décrit ci-dessous 1. Appuyez sur le bouton [Help]. Utilisation de la télécommande pour les - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 84
de configurer le rapport hauteur/largeur à partir du menu Signal - Aspect. Voici une liste des réglages de rapport hauteur/largeur disponibles : BrightLink 480i et PowerLite 470/480 • Automatique : Règle automatiquement le rapport hauteur/largeur et le paramètre Résolution (disponible seulement pour - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 85
images telles quelles (format et résolution conservés). Des bandes noires peuvent apparaître ou les images peuvent être rognées, selon la résolution. s Guide de l'utilisateur de projecteur : Menu Signal D Réglez la mise au point 1. Faites glisser le levier du capot du filtre à air ( ) pour ouvrir le - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 86
E Utilisez la poignée de réglage sur le côté gauche pour régler le roulis horizontal E J Répétez les étapes à tel que nécessaire. Il est important de commencer par déserrer les vis. Sinon, vous ne pourrez pas faire tourner les poignées tel que nécessaire pour le réglage de l'image. 1. Desserrez la - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 87
Français F Utilisez la poignée de réglage sur le côté droit pour régler le roulis horizontal 1. Desserrez les vis (x2) du chiffre indiqué sur l'illustration suivante ( ). 2. Tournez la poignée bleue foncée ( ) pour régler le roulis horizontal ( ). Vis (x2) E J 3. Une fois tous les réglages des é - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 88
glez le coulissement vers l'avant/l'arrière 1. Desserrez les boulons à tête cylindrique à six pans M4 x 12 mm (x2), puis réglez la glissière du support de montage. Boulons à tête cylindrique à six pans M4 x 12 mm (x2) E J 2. Une fois tous les réglages des étapes à terminés, serrez les boulons à tête - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 89
Appuyez sur le bouton Esc de la télécommande ou du panneau de commande pour supprimer la mire. Avertissement Serrez fermement toutes les vis. Sinon, le support de montage ou le projecteur pourrait tomber et provoquer des blessures corporelles ou des dommages matériels. 89 - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 90
7 Fixation des caches A Fixez les caches du support de montage et le capuchon de protection Si vous devez utiliser un câble de sécurité, assurez-vous de le fixer avant d'installer les caches de la plaque murale. Consultez la page 91 pour obtenir les instructions. 1. Fixez les caches de la plaque - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 91
1410Wi Pro, consultez le Guide de l'utilisateur en ligne. Vous pouvez installer un lien au guide en insérant le CD du projecteur BrightLink 1410Wi Pro. Ou consultez l'un des sites Web suivants : É.-U. : epson.com/brightlinkdownloads Canada : epson.ca/brightlinkdownloads Fixation d'un câble - Epson BrightLink Pro 1430Wi | Installation Guide - Ultra-Short Throw Wall Mount - Page 92
câble, reportez-vous au Guide de l'utilisateur fourni avec le verrou. Lorsque l'installation du projecteur est terminée, assurez-vous de laisser la télécommande, les piles et les CD dans la pièce où le projecteur se trouve. Pour les projecteurs BrightLink et BrightLink Pro, laissez aussi les crayons
Installation Guide
Guide d’installation