Epson C200001 Quick Start

Epson C200001 - Stylus Color 660 Inkjet Printer Manual

Epson C200001 manual content summary:

  • Epson C200001 | Quick Start - Page 1
    To get up and running with your EPSON Stylus®® COLOR 660, you need to: 1 Set up the printer 2 Install the software 3 Print an image CPD 8883-R1
  • Epson C200001 | Quick Start - Page 2
    on the unpacking sheet in the printer box. Make sure you've got a cable to connect the printer to your computer, plus all these items: paper support black ink cartridge color ink cartridge CD-ROM printer Printer Basics book media pack with samples of EPSON® ink jet papers To connect to a PC
  • Epson C200001 | Quick Start - Page 3
    to the installation position. Always use the power button to turn the printer on or off; never use an external switch, such as a power strip switch. 4. Lift the two ink cartridge clamps. Don't open an ink cartridge clamp or remove a cartridge except to replace it with a new one. Once you remove
  • Epson C200001 | Quick Start - Page 4
    size papers, such as 4 x 6-inch Photo Paper, have specific loading instructions; see your Printer Basics book for instructions. 1. Pull out the output tray extensions. Slide the left edge guide so it's slightly wider than your paper. left edge guide Keep ink cartridges out of the reach of children
  • Epson C200001 | Quick Start - Page 5
    -ROM attached to the front of this card. It includes printer software (also called a printer driver), the electronic EPSON Stylus COLOR 660 Reference Guide, and bonus software applications. You must install the printer driver for the printer to work correctly. Keep this card with you as you install
  • Epson C200001 | Quick Start - Page 6
    on the Photo Quality Ink Jet Paper from your EPSON media pack: Printer Basics also gives step-by-step printing instructions and contains basic printer maintenance and troubleshooting information. For advanced printing and troubleshooting information, see your electronic EPSON Stylus COLOR 660
  • Epson C200001 | Quick Start - Page 7
    To get up and running with your EPSON Stylus® COLOR 660, you need to: 1 Set up the printer 2 Install the software 3 Print an image CPD 9240
  • Epson C200001 | Quick Start - Page 8
    the EPSON® Guided Printing Exercise to print a full color image! Set Up the Printer 1 Unpack the Printer Remove all the tape and packing material, as described on the unpacking sheet in the printer box. Make sure you've got these items: paper support black ink cartridge color ink cartridge CD
  • Epson C200001 | Quick Start - Page 9
    2 Attach the Paper Support Insert the paper support in the slots at the back of the printer's sheet feeder. 3 Install the Ink Cartridges You must install both ink cartridges and leave them installed or the printer won't work. 1. Plug the power cord into a grounded outlet. Don't use an outlet that
  • Epson C200001 | Quick Start - Page 10
    to the installation position. Always use the Ppower button to turn the printer on or off; never use an external switch, such as a power strip switch. 4. Lift the two ink cartridge clamps. Don't open an ink cartridge clamp or remove a cartridge except to replace it with a new one. Once you remove
  • Epson C200001 | Quick Start - Page 11
    the blue labels facing up and toward the back of the printer. Then press down the clamps until they lock into place. Keep ink cartridges out of the reach of children. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water
  • Epson C200001 | Quick Start - Page 12
    or special ink jet paper. A sample pack of EPSON ink jet papers came with your printer. Smaller size papers, such as 4 x 6-inch Photo Paper, have specific loading instructions; see your Printer Basics book for instructions. 1. Pull out the output tray extensions. Slide the left edge guide so it
  • Epson C200001 | Quick Start - Page 13
    . 2. Connect the USB/Parallel Adapter cable to the printer's parallel connector; then squeeze the wire clips together to a If you're using a USB hub, connect the printer to the first tier of the hub or the printer may malfunction. If your printer doesn't work there, connect it directly to a USB port
  • Epson C200001 | Quick Start - Page 14
    included with this package. It includes printer software (also called a printer driver), the electronic EPSON Stylus COLOR 660 Reference Guide, and bonus software applications. You must install the printer driver for the printer to work correctly. Keep these instructions with you as you install your
  • Epson C200001 | Quick Start - Page 15
    use the Browse button to locate your CD-ROM drive and the \Browser\Drivers\WIN9X directory. Click OK to close the Browse for Folder window. The location, click Browse, locate your CD-ROM drive, then locate the \Browser\Drivers\WIN9X directory. This example uses D as the CD-ROM drive; substitute your
  • Epson C200001 | Quick Start - Page 16
    to your system. At the final screen, click Finish. 8. Windows 98 then detects your printer and displays the following screen. Click Next to install your printer driver. You see your printer model name here 9. At the next screen, select Search for the best driver for your device and click Next. 9
  • Epson C200001 | Quick Start - Page 17
    to install your printer driver. At the last screen, click Finish. 12. Restart your system. 13. Now you can install the rest of the software on your CD-ROM. See "Installing Your Creative Software and Electronic Manual" on page 11 for instructions. If you want to verify that your USB software
  • Epson C200001 | Quick Start - Page 18
    any other open windows. (If you need to uninstall the printer software, see your Printer Basics book.) 3 Installing Your Creative Software and Electronic Manual Once you've restarted your system, you can install the rest of the software on your EPSON CD-ROM. Follow these steps: 1. Make sure the
  • Epson C200001 | Quick Start - Page 19
    your printer and installed the software, you're ready to print in any application. If you installed the EPSON Guided Printing Photo Quality Ink Jet Paper from your EPSON media pack. Printer Basics also gives step-by-step printing instructions and contains basic printer maintenance and troubleshooting
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

1
2
3
CPD 8883-R1
Set up the printer
Install the software
Print an image
1
Set up the printer
2
Install the software
3
Print an image
To get up and running with your
EPSON Stylus
®
COLOR 660, you need to:
To get up and running with your
EPSON Stylus
®
COLOR 660, you need to: