Epson EMP-7900 User Manual

Epson EMP-7900 Manual

Get Epson EMP-7900 PDF manuals and user guides View all Epson EMP-7900 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson EMP-7900 manual content summary:

  • Epson EMP-7900 | User Manual - Page 1
    User's Guide
  • Epson EMP-7900 | User Manual - Page 2
    , such as lamp blowing during projection, the projector can notify you of the error via e-mail. In addition, if you are using EMP-7950, EasyMP allows you to; • Make easy network connection with a computer via a wireless LAN. • Project a computer's image over a network. For instructions on how to
  • Epson EMP-7900 | User Manual - Page 3
    Features of the Projector Large-volume USB Storage is Available to Use (EMP-7950 only) As well as a USB-compatible digital camera, you can use a USB-compatible hard disk and a USB-compatible memory device. This allows you to use large presentation files. p.32, "Showing the Presentation (Using the
  • Epson EMP-7900 | User Manual - Page 4
    Contents User's Guide 3 Features of the Projector 1 Before Using the Projector Part Names and Functions 6 Front/Top/Side 6 Base 7 Rear 7 Control Panel 8 Remote Control 9 Input/Output Ports (EMP-7900 10 Input/Output Ports (EMP-7950 11 Before Using the Remote Control 12 Inserting the
  • Epson EMP-7900 | User Manual - Page 5
    for the EMP-7900 98 Compatible Computers 99 Installing and Uninstalling the Projector Software 99 Network Cable Connections 101 Projector Connection Settings 101 Problem Reporting Using the Mail Notification Function...... 103 Centralised Control using EMP Monitor 108 Troubleshooting Using
  • Epson EMP-7900 | User Manual - Page 6
    the procedures for setting up the projector before use. Part Names and Functions 6 • Front/Top/Side 6 • Base 7 • Rear 7 • Control Panel 8 • Remote Control 9 • Input/Output Ports (EMP-7900 10 • Input/Output Ports (EMP-7950 11 Before Using the Remote Control 12 • Inserting the Batteries 12
  • Epson EMP-7900 | User Manual - Page 7
    from the remote control. • Foot adjust lever p.44 Pull out the foot adjust lever to extend and retract the front foot. • Front adjustable foot p.44 Extend and retract to adjust the projection angle when the projector is placed on a surface such as a shelf. User's Guide 6 • (Temperature) indicator
  • Epson EMP-7900 | User Manual - Page 8
    ceiling mount here when suspending the projector from the ceiling. • Feet for storage Used when standing the projector vertically for storage. • Security lock ( ) p.154 • Remote control lightreceiving area p.13 Receives signals from the remote control. • Input/output ports p.10 User's Guide
  • Epson EMP-7900 | User Manual - Page 9
    User's Guide 8 Control Panel Buttons with no description are the same as the remote control buttons. Refer to the remote control descriptions for details. • [Auto/Enter] button p.53, p.96, p.114 Operates in the same way as the [Auto] button on the remote control port and EasyMP (EMP-7950 only) in
  • Epson EMP-7900 | User Manual - Page 10
    Part Names and Functions User's Guide 9 Remote Control If you position the over the button icon or button name, a description of that button will appear. • Remote control light-emitting area p.14 • Indicator • [Page] buttons p.23 • [E-Zoom] buttons p.64 • [Color Mode] button p.56 • [PinP] button
  • Epson EMP-7900 | User Manual - Page 11
    Functions Input/Output Ports (EMP-7900) • Network port p.101 Use to connect the projector to a network. • User's Guide 10 • [USB] port p.23, p.157 Connects the projector to a computer via the USB cable when using the wireless mouse function. • [Control (RS-232C)] port p.157 Connects the projector
  • Epson EMP-7900 | User Manual - Page 12
    User's Guide 11 Input/Output Ports (EMP-7950) • [Monitor Out] port p.25 Outputs analogue-RGB signals from a computer connected to the projector by a computer cable, to an external monitor. It is not compatible with digital-RGB signals from computers, video images and EasyMP images. • Access Lamp
  • Epson EMP-7900 | User Manual - Page 13
    will need to insert the batteries that are provided with the projector before the remote control can be used. CAUTION Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the batteries. User's Guide 12 2 Insert the batteries. Check the positions of the (+) and (-) marks
  • Epson EMP-7900 | User Manual - Page 14
    emitting area User's Guide 13 Remote control light-receiving area (rear) 2 Point the remote control light-emitting area towards one of the remote control light-receiving areas on the projector and operate the remote control buttons. TIP • Do not allow sunlight or light from fluorescent lamps to
  • Epson EMP-7900 | User Manual - Page 15
    (30 ft.) Approx. 15° Approx. 15° User's Guide 14 Operating distance approx. 10 m (30 ft.) Approx. 15° Approx. 15° When suspended from the ceiling Operating distance approx. 10 m (30 ft.) Approx. 30° Approx. 30° Approx. 30° Approx. 30° Remote control light-emitting area Approx. 15° Approx. 15
  • Epson EMP-7900 | User Manual - Page 16
    read the separate Safety Instructions/World-Wide Warranty Terms. • The projector has feet on its side for storage. Do not set up the projector vertically with the feet for projection. p.7 • Front projection • Front/ceiling projection User's Guide 15 • Rear/ceiling projection using a translucent
  • Epson EMP-7900 | User Manual - Page 17
    Installation User's Guide 16 Screen Size and Projection Distance The distance from the lens to the screen determines the actual image size. The recommended distance and projection distance values given below are for when the projector is fitted with a standard lens or an optional wide zoom lens.
  • Epson EMP-7900 | User Manual - Page 18
    Removing Cards (EMP-7950 only) User's Guide 17 You can use PC cards such as wireless LAN cards and memory cards with the EMP-7950. The EMP-7950 is supplied into the projector's card slot. • Wireless LAN card (the card supplied with the EMP-7950) • Memory card. See "Appendices: Specifications" p.
  • Epson EMP-7900 | User Manual - Page 19
    CardPlayer, be sure to close CardPlayer before removal. CardPlayer may malfunction if a memory card is removed without closing CardPlayer first. "Closing CardPlayer" in the EasyMP Operation Guide User's Guide 18 PROCEDURE 1 Press the eject button to the right of the card slot. The eject button
  • Epson EMP-7900 | User Manual - Page 20
    An error occurred while data was being read from the memory card. User's Guide 19 Wireless LAN Card Access Lamp Status The card slot access lamp does not light when a wireless LAN card has been inserted into the projector. You can check the network communication status by observing the status of
  • Epson EMP-7900 | User Manual - Page 21
    User's Guide 20 • Condition 2: The display resolution and frequency of the computer must be listed in the "List of Supported Monitor Displays". See "Appendices: List of Supported the computer for further details. • If the computer and projector are too far away from each other for the accessory
  • Epson EMP-7900 | User Manual - Page 22
    " in the configuration menu to "RGB". p.86 • When connecting more than one device to the projector, use the [Comp] button on the remote control, or the [Computer/DVI] button on the projector's control panel to switch between devices after starting projection. p.37 To monitor port To [Computer] port
  • Epson EMP-7900 | User Manual - Page 23
    . See "Appendices: Optional Accessories and Consumables" p.151 • When connecting more than one device to the projector, use the [DVI] button on the remote control, or the [Computer/DVI] button on the projector's control panel to switch between devices after starting projection. p.37 User's Guide 22
  • Epson EMP-7900 | User Manual - Page 24
    Pointer (Wireless Mouse Function) You can use the remote control as a wireless mouse to control the mouse pointer on the screen by using the accessory USBg cable to connect the USB port of the computer to the [USB] port at the rear of the projector. Computer Windows 98/2000/Me/ XP Home Edition
  • Epson EMP-7900 | User Manual - Page 25
    position to drop the items being dragged. User's Guide 24 TIP • If the mouse button settings have been reversed at the computer, the operation of the remote control buttons will also be reversed. • The wireless mouse function of the remote control cannot be used while the following functions are
  • Epson EMP-7900 | User Manual - Page 26
    analogue RGB signals from a computer are being projected, you can connect an external monitor to the projector in order to view the images on the external monitor at times such as when giving presentations. configuration menus and help menus are not output to the external monitor. User's Guide 25
  • Epson EMP-7900 | User Manual - Page 27
    , image interference or errors in operation may result. User's Guide 26 Projecting Composite Videog Images Use a commercially- available one device to the projector, use the [Video] button on the remote control, or the [Video/BNC] button on the projector's control panel to switch between devices
  • Epson EMP-7900 | User Manual - Page 28
    a commercially-available S-Videog cable to make the connections. User's Guide 27 Projecting Component Video Images Use the optional component videog device to the projector, use the [SVideo] button on the remote control, or the [Video/BNC] button on the projector's control panel to switch between
  • Epson EMP-7900 | User Manual - Page 29
    User's Guide 28 Projecting RGB Video Images RGB video is used when projecting RGB signals from a video source other than a computer that is connected to the projector to the projector, use the [Comp] button on the remote control, or the [Computer/DVI] button on the projector's control panel to
  • Epson EMP-7900 | User Manual - Page 30
    sound from the connected video equipment (such as a computer or video deck) through the projector's built-in speaker if the video equipment has an audio output port. In the audio cable (commercially-available) To audio output port User's Guide 29 red To [Audio] port When video signals are being input
  • Epson EMP-7900 | User Manual - Page 31
    only be set to "Computer" or "DVI". • If using a commercially-available 2RCA (L/R)/stereo mini-jack audio cable, use one that is marked as "No resistance". User's Guide 30
  • Epson EMP-7900 | User Manual - Page 32
    Playing Sound from External Speakers You can connect speakers with built-in amplifiers to the projector's [Audio Out] port in order to enjoy a fuller quality of sound. Use a be output to external speakers. No sound will be output from the projector's built-in speaker at this time. User's Guide 31
  • Epson EMP-7900 | User Manual - Page 33
    User's Guide Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-7950 only) 32 USB1.1-compatible digital cameras, hard disk drives and USB storage devices can be connected to the projector. Image files that are stored inside the digital camera and scenarios, images and
  • Epson EMP-7900 | User Manual - Page 34
    press the [Enter] button on the remote control to close CardPlayer. "Showing the Presentation (Using the CardPlayer)" in the EasyMP Operation Guide CAUTION Be sure to shut down CardPlayer first before disconnecting a USB cable or a USB storage device from the projector. If you do not shut down
  • Epson EMP-7900 | User Manual - Page 35
    Images (Preview Function 38 Turning the Projector Off 40 Adjusting the Screen Image 42 the Feets 44 • Manually Correcting Keystone Distortion 51 • Projecting Easy-to-see Images Without a Screen (Wall Shot 51 • Adjusting User's Logo Protect" is enabled (ON 59 • Setting Password Protect 60
  • Epson EMP-7900 | User Manual - Page 36
    or other video source to the projector. p.20, p.26 3 Remove the lens cover. 5 Connect the other end of the power cable to an earthed electrical outlet. Wait until the indicator lights orange. Lit orange TIP The remote control and the projector's control panel buttons will not function while
  • Epson EMP-7900 | User Manual - Page 37
    is set to "ON", none of the buttons on the projector's control panel will work except for the [Power] button. p.76 Use the remote control buttons at such times. User's Guide 36 4 Press the [Power] button on either the remote control or the projector's control panel to turn the power on for the
  • Epson EMP-7900 | User Manual - Page 38
    device is connected to the projector, use the remote control or projector control panel buttons to select the image source to be projected while referring to the following table. You can also use the preview function to select the signal source. p.38 Remote control Port EasyMP*1 Computer DVIg
  • Epson EMP-7900 | User Manual - Page 39
    long periods. User's Guide 38 Selecting an Image Source While Viewing Projected Images (Preview Function) The preview function lets you project the images from the currentlyselected image source and view them in a preview screen while selecting the signal source. Use the remote control to carry
  • Epson EMP-7900 | User Manual - Page 40
    Turning the Projector On User's Guide 39 2 Tilt the [ ] button to select the images to be projected. be cancelled and the preview screen will be displayed. If you cancel the preview function without changing the input source, the projected images will return to the state they were at before
  • Epson EMP-7900 | User Manual - Page 41
    remote control or the projector's control panel. Remote control User's Guide 40 TIP If the message "The projector is overheating. Make sure nothing is blocking the air vent, and clean or replace on either the remote control or the projector's control panel once more. The lamp will switch off.
  • Epson EMP-7900 | User Manual - Page 42
    flashing orange, otherwise operating problems may result. User's Guide 41 6 Attach the lens cover. Attach the lens cover to the lens when not using the projector, in order to stop the lens from getting dusty or dirty. 5 Set the [R/C] switch on the remote control to "OFF". Lens cover TIP If you
  • Epson EMP-7900 | User Manual - Page 43
    p.123, p.140 • If using the standard lens or an optional wide zoom lens and the projector is positioned outside the normal projecting range of 77-1113 cm (2.5-36.5 ft.), it may not be possible to obtain the correct focus. If you have trouble obtaining the correct focus, check the projection distance
  • Epson EMP-7900 | User Manual - Page 44
    distortion to the image, but the automatic keystone correction function will automatically corrects the image distortion. p.46 User's Guide 43 When projecting from the side of the screen If the projector cannot be set up directly in front of the screen, you can project images at a horizontal angle
  • Epson EMP-7900 | User Manual - Page 45
    Adjusting the Screen Image User's Guide 44 Adjusting the Feets The front adjustable foot and the rear adjustable feet can be extended and retracted to adjust the tilt of the projector to a maximum of 12º upward and 4º downward. TIP If you use the front adjustable foot and the rear adjustable feet
  • Epson EMP-7900 | User Manual - Page 46
    projector has been tilted both horizontally and vertically • If an optional projection lens has been fitted • When the zoom is set to "W" User's Guide 45 This projector has occurred after moving the projector, simply by using buttons on the projector's control panel. See "Automatic keystone
  • Epson EMP-7900 | User Manual - Page 47
    the sharpness setting. p.78, p.81 User's Guide 46 Automatic keystone correction When the projector has been tilted vertically, automatic keystone if "Rear Proj." or "Ceiling" in the "Advanced1" menu is set to "ON", or if the projection area has been corrected manually using the "Quick Corner"
  • Epson EMP-7900 | User Manual - Page 48
    the Screen Image User's Guide 47 Vertical correction and horizontal correction Vertical correction and horizontal correction can be carried out using either the projector's control panel or the configuration menus. This procedure explains how to use the projector's control panel to correct
  • Epson EMP-7900 | User Manual - Page 49
    Advanced1 Height :0 - + Advanced2 About Reset All [ ESC ]: Return [ ]: Select [ ]: Adjust [Menu]: Exit User's Guide 48 2 Tilt the [ ] button on the remote control to the left or right, or press the [ ] or [ ] buttons on the projector's control panel to correct the height while viewing
  • Epson EMP-7900 | User Manual - Page 50
    be displayed. User's Guide 49 [ / ]:Adjust [ ] :Move next [ESC] :Return (Press 1 second to reset) 2 Press the [Auto/Enter] button on the projector's control panel and then select the corner to be corrected on the screen. You can also press the [Enter] button on the remote control to select
  • Epson EMP-7900 | User Manual - Page 51
    the remote control to correct the angle position. User's Guide 50 4 When the adjustment is complete, press the [Menu] button on either the remote control or the projector's control panel to close the configuration menu. [ / ]:Adjust [ ] :Move next [ESC] :Return (Press 1 second to reset) Screen
  • Epson EMP-7900 | User Manual - Page 52
    surface such as a dark wall. User's Guide 51 PROCEDURE The Wall Shot function can be operated using either the remote control or the projector's control panel. 1 Press the [Wall Shot] button on either the remote control or the projector's control panel while the images are being projected
  • Epson EMP-7900 | User Manual - Page 53
    Adjusting the Image Quality User's Guide 52 2 To change the status, press the [Wall Shot] button ON" is being displayed on the screen so that "Wall Shot OFF" is selected. TIP • When the projector's power is turned off, images will be projected next time with the status set to "Wall Shot OFF".
  • Epson EMP-7900 | User Manual - Page 54
    Syncg. User's Guide 53 TIP • If "Auto Setup" in the "Advanced2" menu is set to "OFF" (the default setting for this command is "ON"), automatic setup is not carried out. If you press the [Auto] button on the remote control or the [Auto/Enter] button on the projector's control panel while computer
  • Epson EMP-7900 | User Manual - Page 55
    , and this cannot be fixed using automatic setup, you will need to adjust the trackingg manually using the following procedure. User's Guide 54 While holding down the [Shift] button on the projector's control panel, press the [ ] button. The tracking value decreases each time the button is pressed
  • Epson EMP-7900 | User Manual - Page 56
    each time the button is pressed. Projector User's Guide 55 While holding down the [Shift] button on the projector's control panel, press the [ ] button. The sync value decreases each time the button is pressed. Projector TIP • If you adjust the sync without adjusting the tracking first, it will
  • Epson EMP-7900 | User Manual - Page 57
    sRGB colour standard. If the connected source has a sRGB mode, set both the projector and the connected signal source to sRGB. User's Guide 56 PROCEDURE Selecting the colour mode can be carried out using either the remote control or the configuration menus. This procedure explains how to use the
  • Epson EMP-7900 | User Manual - Page 58
    adjust the volume. For adjustment using the configuration menus: See "Audio" - "Volume" p.83 Press the [Volume] button on either the remote control or the projector's control panel. When the button is pressed to the [ ] side, the volume increases, and when it is pressed to the [ ] side, the volume
  • Epson EMP-7900 | User Manual - Page 59
    start. Remote control Numeric buttons Enter the password. #Refer to the "User's Guide" for the operation. [0-9]:Enter The buttons inside the box will switch to numeric keypad mode while the [Num] button is lit. If you leave the power cable connected to the electrical outlet and turn the projector
  • Epson EMP-7900 | User Manual - Page 60
    projector's operation will be locked. Contact the nearest address provided in the "International Warranty Conditions" section of the Safety Instructions/World Wide Warranty Terms booklet." User's Guide illumination time for the projector's lamp from the point when the projector's menu is closed. If
  • Epson EMP-7900 | User Manual - Page 61
    your preferred place on the projector to increase anti-theft effectiveness. User's Guide 60 2 Turn "Power ON Protect" on. (1) Select "Power ON Protect", and then press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel. (2) Select "ON", and then
  • Epson EMP-7900 | User Manual - Page 62
    (Password Protect) User's Guide 61 4 Turn "User's Logo Protect" on. (1) Select "User's Logo Protect", and then press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel. (2) Select "ON", and then press the [Enter] button on the remote control or the
  • Epson EMP-7900 | User Manual - Page 63
    " Menu 94 •"Reset All" Menu 95 • Using the Configuration Menus 96 • E-Zoom Function 64 • P in P (Picture in Picture) Function 65 • Effect Function 67 •Using the Pointer Icon 67 •Drawing Straight and Curved Lines 68 Monitoring and Controlling Projectors via a Network (for the EMP-7900 98
  • Epson EMP-7900 | User Manual - Page 64
    projector's control panel. Remote control You can use the "A/V Mute" command in the "Setting" menu to set the screen appearance when the images and sound have been paused to any one of the following three settings. p.86 Solid black Solid blue User's logo Default setting TIP • The default user
  • Epson EMP-7900 | User Manual - Page 65
    Enhancing Projection User's Guide 64 Freeze Function This function pauses only the projected images. The sound keeps playing without pausing. pressing the [ESC] button on either the remote control or the projector's control panel. Remote control E-Zoom Function This function lets you enlarge and
  • Epson EMP-7900 | User Manual - Page 66
    Functions for Enhancing Projection User's Guide 65 3 When the [ ] button is pressed, the image is menu, and then press the [PinP] button on the remote control. The sub-screen will appear at the top-left of the screen, and the operation guide will appear at the bottom-left of the screen. Sub-
  • Epson EMP-7900 | User Manual - Page 67
    Functions for Enhancing Projection User's Guide 66 2 Tilt the [ ] button on the remote control to change the position of the sub-screen. 3 Press the [E-Zoom] button on the remote control to change the size of the sub-screen to one of five available sizes. 4 When you press the [Enter] button,
  • Epson EMP-7900 | User Manual - Page 68
    when required. p.84 User's Guide 67 Using the Pointer Icon You can use the pointer icon to draw attention to parts of projected images that you would like to explain about during a presentation, for example. PROCEDURE 1 Press the [Effect] button on the remote control. The pointer icon will
  • Epson EMP-7900 | User Manual - Page 69
    projector's power is turned off, the pointer icon that has been saved using the "Pointer/Line1" command will be the first pointer icon to be displayed the next time the Effect function is used. User's Guide has also been set for that pointer type. Remote control 3 Set the ending point for the line.
  • Epson EMP-7900 | User Manual - Page 70
    from the screen. User's Guide 69 Preset Function When remote control or the projector's control panel, and then select the "Video" menu from the main menu. Then make the settings that you would like to be saved. p.78 Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset
  • Epson EMP-7900 | User Manual - Page 71
    Projection User's Guide 70 2 Once the settings have been made, select "Preset" in the sub-menu and then press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel. Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All
  • Epson EMP-7900 | User Manual - Page 72
    User's Guide 71 Applying Saved "Video" Menu Settings PROCEDURE While projecting analogue RGB images from a computer, press the [Preset] button on the remote control Resize] button on either the remote control or the projector's control panel is pressed. Remote control TIP • Preset numbers that
  • Epson EMP-7900 | User Manual - Page 73
    [Resize] button while holding down the [Shift] button on the projector's control panel. Resized display (5:4) Aligned to left (5:4) The middle section of the image is projected. You can tilt the [ ] button on the remote control to scroll around the image. Resized display (4:3) Aligned to right
  • Epson EMP-7900 | User Manual - Page 74
    in 16:9 wide-screen format. PROCEDURE The display changes each time you press the [Resize] button on either the remote control or the projector's control panel. Remote control User's Guide 73 For HDTVg When images that are output in 16:9 format are displayed at an aspect ratio of 4:3, the images
  • Epson EMP-7900 | User Manual - Page 75
    either the remote control or the projector's control panel, and then select "Projector ID" from the "Advanced2" menu. See "Using the Configuration Menus" for details on this operation. p.96 Remote control User's Guide 74 Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All
  • Epson EMP-7900 | User Manual - Page 76
    on the remote control or the [Auto/ Enter] button on the projector's control panel to accept the ID number setting. Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All Brightness Control : High Low Projector ID : 6 Set Network Set COM Port : RS-232C USB Auto Setup
  • Epson EMP-7900 | User Manual - Page 77
    User's Guide 76 TIP If you would like to check the ID number that is currently set for a remote control, press the [ID] button on the remote control PROCEDURE 1 Press the [Menu] button on either the remote control or the projector's control panel, and then select "Advanced2" - "Operation Lock"
  • Epson EMP-7900 | User Manual - Page 78
    About Reset All Position Adjust Tracking : 0000 Sync. : 0 Brightness : 0 - + Contrast : Auto Manual Adjust Sharpness : 0- + Color Mode Select [Presentation ] Resolution : Auto Manual Select :[ ] Preset Set Reset Execute [ ]: Select [ ]: Enter [Menu]: Exit User's Guide 77
  • Epson EMP-7900 | User Manual - Page 79
    Menu Functions User's Guide 78 List Effect Setting User's Logo Advanced1 Advanced2 About Reset All Brightness : Contrast : Sharpness : Color Mode Reset 0- + Auto Manual 0- Adjust ] button on the remote control or the [Auto/Enter] button on the projector's control panel and make the adjustment
  • Epson EMP-7900 | User Manual - Page 80
    Configuration Menu Functions User's Guide 79 Sub-menu manually. (Recording is only possible when analogue RGB signals are being input) Allows "Video" menu settings to be saved and then applied to analogue RGB images that are being projected by pressing the [Preset] button on the remote control
  • Epson EMP-7900 | User Manual - Page 81
    User's Guide 80 Sub-menu Function Default Reset Resets all adjustments values for the "Video" menu - functions to their default settings. •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel to reset. • Select "Reset All" to reset
  • Epson EMP-7900 | User Manual - Page 82
    [Auto ] Reset Execute [ ]: Select [ ]: Enter [Menu]: Exit User's Guide 81 Sub-menu Function Default Position Moves the image display position vertically and horizontally. •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel and make
  • Epson EMP-7900 | User Manual - Page 83
    User's Guide 82 Sub-menu Video Signal Reset Function (Selection is only possible when composite video/S-Video signals are being input and are selected) Selects the video signal format. •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel
  • Epson EMP-7900 | User Manual - Page 84
    - Treble : 0- Bass : 0- Reset Execute DVI + + + [ ]: Select [ ]: Enter [Menu]: Exit User's Guide 83 Sub-menu Function Computer/ Use this ] button on the remote control or the [Auto/Enter] button on the projector's control panel to reset. •Select "Reset All" to reset all menu settings -
  • Epson EMP-7900 | User Manual - Page 85
    "Effect" menu - functions to their default settings. •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel to reset. •Select "Reset All" to reset all menu settings - including settings for the "Video" and "Audio" menus - to their default
  • Epson EMP-7900 | User Manual - Page 86
    Sleep Mode : ON OFF Reset Execute [ ]: Select [ ]: Enter [Menu]: Exit User's Guide 85 Sub-menu Function Default Keystone Corrects keystone distortion in images. Press the [Enter] button on the remote control or the [Auto/ Enter] button on the projector's control panel, and then make the
  • Epson EMP-7900 | User Manual - Page 87
    Using the Configuration Menu Functions User's Guide 86 Sub-menu Function P in P When using the P in P function, this selects whether the * Auto* * If the "Computer Input" and "BNC Input" have been set to "Auto", the projector detects an image source automatically depending on an input signal.
  • Epson EMP-7900 | User Manual - Page 88
    setting if the "User's Logo Protect" function of Password Protect has been set to "ON" and "No-Signal Msg." or "A/V Mute" is set to "Logo". p.61 •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel to reset. •Select "Reset All" to reset all menu
  • Epson EMP-7900 | User Manual - Page 89
    Advanced2 About Reset All Execute User's Guide 88 Sub-menu Function Execute Records a user's logo. p.148 •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel, and then follow the instructions that appear on the screen. •A user's logo
  • Epson EMP-7900 | User Manual - Page 90
    Video Film/Auto Color Adjustment : Color Temp. RGB Adjust Rear Proj. Ceiling : ON OFF : ON OFF Standby Mode : Network ON Network OFF Language Select [English] Reset Execute [ ]: Select [ ]: Enter [Menu]: Exit User's Guide 89 Sub-menu Function Default Startup Screen Sets whether the
  • Epson EMP-7900 | User Manual - Page 91
    User's Guide remote control or the [Auto/Enter] button on the •RGB projector's control panel and make the adjustment. : Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel out. Ceiling Use when installing the projector on a ceiling. When set
  • Epson EMP-7900 | User Manual - Page 92
    displays. •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel and choose the setting. Resets all adjustments values for the "Advanced1" menu functions except for the "Rear Proj.", "Ceiling" and "Language" settings to their default settings
  • Epson EMP-7900 | User Manual - Page 93
    Advanced2 About Reset All Brightness Control : High Low Projector ID : 1 Set Network Set COM Port : RS-232C USB Auto Setup : ON OFF BNC Sync Termination : ON OFF Direct Power ON : ON OFF Operation Lock : ON OFF Reset Execute [ ]: Select [ ]: Enter [Menu]: Exit User's Guide 92
  • Epson EMP-7900 | User Manual - Page 94
    User's Guide 93 Sub-menu Direct Power ON Operation Lock Reset Function When the projector's power cable is connected, projection starts without button on the remote control or the [Auto/Enter] button on the projector's control panel to reset. •Select "Reset All" to reset all menu settings
  • Epson EMP-7900 | User Manual - Page 95
    Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All Lamp (High Brightness) : 0H (Low Brightness) : 0H Reset Lamp Timer Execute Source : Video Video Signal : Auto(-----) User's Guide 94 Sub-menu Function Default Lamp Displays the cumulative lamp operating time for
  • Epson EMP-7900 | User Manual - Page 96
    [ ]: Execute [Menu]: Exit User's Guide 95 Sub-menu Function Execute Resets all items in all configuration menus to their default settings. •Press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel to reset. •Select "Reset" in an individual sub
  • Epson EMP-7900 | User Manual - Page 97
    in the main menu. Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All User's Guide 96 3 Confirm the selection. If using the remote control, press the [Enter] button to confirm a selection. If using the projector's control panel, press the [Auto/Enter] button to confirm
  • Epson EMP-7900 | User Manual - Page 98
    Menu Functions User's Guide 97 TIP The items appearing in the "Video" menu and the "About" menu will vary depending on the type of input source being projected. 5 Select a setting value. Tilt the [ ] button on the remote control or press the [ ] or [ ] button on the projector's control panel to
  • Epson EMP-7900 | User Manual - Page 99
    Network Setup Guide and the EasyMP Operation Guide. Available Network Functions for the EMP-7900 The EMP-7900 is compatible with SNMPg. In addition, you can use the software that is included with the projector for centralised control of projectors and to receive notifications of problems via e-mail
  • Epson EMP-7900 | User Manual - Page 100
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) User's Guide 99 Compatible Computers Computers that can run EMP Monitor Operating System* CPU RAM Free hard disk space Display Windows 98 SE/Me/NT4.0/2000 Professional/ XP Home Edition/XP Professional Pentium MMX 166
  • Epson EMP-7900 | User Manual - Page 101
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) User's Guide 100 4 Check the setup details and then click the "Install" button. Uninstalling the software To uninstall the projector software, select "Control Panel" from "My Computer", double-click "Add/Remove Programs",
  • Epson EMP-7900 | User Manual - Page 102
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) User's Guide 101 Network Cable Connections The projector can be connected to a network using a commerciallyavailable 100baseTX or 10baseT network cable. You must use a Category 5 shielded twisted-pair cable to connect the
  • Epson EMP-7900 | User Manual - Page 103
    and Controlling Projectors via a Network (for the EMP-7900) User's Guide 102 2 Press the [Num] button on the remote control to enter numbers. You may need to enter numbers as part of the settings for an item. If you press the [Num] button, it will light up and the remote control buttons
  • Epson EMP-7900 | User Manual - Page 104
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) User's Guide 103 Problem Reporting Using the Mail Notification Function If EMP NetworkManager has been used to make the settings for the mail notification function, notification messages can be sent to a computer with a preset
  • Epson EMP-7900 | User Manual - Page 105
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) 3 Connection of the projector will start, and the following Setup for Network Projector window will be displayed. If "DHCP" is set to "OFF", the settings for the "Network" function in the "Advanced2" menu will be displayed.
  • Epson EMP-7900 | User Manual - Page 106
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) User's Guide 105 6 Once the mail notification settings have been completed, click [OK]. 7 The display will return to the Setup for Network Projector window, so click [Set]. 8 When the setting finished window appears, click
  • Epson EMP-7900 | User Manual - Page 107
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) User's Guide 106 If a Problem Notification is Sent By Mail If an e-mail message with "EPSON Projector" in the subject line is sent to the IP addressg that have been set as mail notification destinations, the message is a
  • Epson EMP-7900 | User Manual - Page 108
    Monitoring and Controlling Projectors via a Network (for the EMP-7900) User's Guide 107 3 The following IP Address Setup window will be displayed. You should make the following settings when manually connecting a projector. IP addressg [Add] button [Connect] button [Cancel] button Enter the IP
  • Epson EMP-7900 | User Manual - Page 109
    Centralised Control using EMP Monitor User's Guide 108 EMP Monitor can be used to check the statuses of multiple projectors that are connected to the network and to carry out operations such as turning the power for the projectors on and off and changing the signal sources, all using a single
  • Epson EMP-7900 | User Manual - Page 110
    connected to the network will be displayed in a list. User's Guide 109 4 Select the projector to be monitored or controlled and then click [Add]. TIP If you know the IP addressg of the projector that you would like to register, the Manual registration function is a handy way to register the
  • Epson EMP-7900 | User Manual - Page 111
    Control using EMP Monitor 6 Once all new projectors to be monitored have been added, click [Close]. The display will return to the Register projector window, and the names of the added projectors will appear in the projector list. User's Guide 110 8 The statuses of the registered projectors
  • Epson EMP-7900 | User Manual - Page 112
    that is generated when a problem is detected is stored until EMP Monitor is closed. The EMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click the "Refresh" button in the main window to update the status. User's Guide 111 9 The power for
  • Epson EMP-7900 | User Manual - Page 113
    Centralised Control using EMP Monitor The following table shows the function of each button. [View details] button Shows the detailed information for the selected projectors. Power ON Turns the power on for the selected projectors. Power OFF Turns the power off for the selected projectors.
  • Epson EMP-7900 | User Manual - Page 114
    Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. Using the Help 114 Problem Solving 116 • Reading the Indicators 116 • When the Indicators Provide No Help 119 •Problems relating to images 121 •Other problems 126 •Problems Relating to
  • Epson EMP-7900 | User Manual - Page 115
    and answer format. PROCEDURE 1 Press the [Help] button on either the remote control or the projector's control panel. The help menu will be displayed. Remote control User's Guide 114 Help Menu Problems with image Problems with sound Language change Select the relevant item, then confirm or
  • Epson EMP-7900 | User Manual - Page 116
    . The image is too dark. The image is distorted. [ESC]: Return [ ]: Select [ ]: Enter [ ]: Exit TIP If the Help function does not provide a solution to the problem, refer to "Problem Solving". p.116 User's Guide 115
  • Epson EMP-7900 | User Manual - Page 117
    projector. Operation indicator Lamp indicator Temperature indicator User's Guide 116 The following tables show what the indicators mean and how to remedy the problems Safety Instructions/World-Wide Warranty Terms booklet. Red Red Fan related error/Sensor error Stop using the projector,
  • Epson EMP-7900 | User Manual - Page 118
    on, replace it with a new lamp. If this does not solve the problem, stop using the projector and disconnect the power cable from the electrical outlet. Then contact your dealer or the nearest address provided in the "International Warranty Conditions" section of the Safety Instructions/World-Wide
  • Epson EMP-7900 | User Manual - Page 119
    Problem Solving Status Orange Cause Standby condition Green Warm-up in progress Green Projection in progress User's Guide 118 : lit : flashing : off Remedy or Status (Not abnormal) Press the [Power] button on either the remote control or the projector's control panel to start projection.
  • Epson EMP-7900 | User Manual - Page 120
    , so that the colours projected by the projector and the colours appearing on the monitor may not necessarily match, but this is not a sign of a problem.) Images appear dark p.126 Other problems No sound can be heard or the sound is faint p.126 The remote control does not work p.127 The fans do
  • Epson EMP-7900 | User Manual - Page 121
    problem occurs with the projector p.128 The projector cannot be monitored and controlled using the EMP Monitor function p.129 An error message is displayed (error message when EMP Monitor is running) p.138 For EMP with EMP SlideMaker2 p.134 An error message is displayed p.134-p.138 User's Guide 120
  • Epson EMP-7900 | User Manual - Page 122
    User's Guide 121 Problems relating to images No images appear Check Remedy Was the [Power] button pressed? Press the [Power] button on either the remote control or the projector's control panel to turn the power on. The remote control cannot be used unless the [R/C] switch of the remote control
  • Epson EMP-7900 | User Manual - Page 123
    Problem Solving User's Guide 122 The message "Not Supported." is displayed Check Remedy Are the image signal format settings correct? If a composite videog or S-Videog source is connected to the projector the remote control or the projector's control panel appear on the LCD monitor or accessory
  • Epson EMP-7900 | User Manual - Page 124
    this projector. "List of Supported Monitor Displays" p.159 Computer documentation Have the "Sync.g" and "Trackingg" settings been adjusted correctly? Only when projecting computer images Press the [Auto] button on the remote control or the [Auto/Enter] button on the projector's control panel too
  • Epson EMP-7900 | User Manual - Page 125
    Problem Solving User's Guide 124 Image is truncated (large) or small remote control or the [Auto/Enter] button on the projector's control panel to automatically adjust the setting. If the images have not been correctly adjusted after using the automatic setup function, adjust the setting manually
  • Epson EMP-7900 | User Manual - Page 126
    Problem Solving User's Guide 125 Image colours are not right Check Remedy Do the When projecting onto a normal screen, press the [Wall Shot] button on either the remote control or Shot ON"? the projector's control panel to change the setting to "Wall Shot OFF". To re-adjust the Wall Shot
  • Epson EMP-7900 | User Manual - Page 127
    Problem Solving User's Guide 126 Images appear dark Check Have the image brightness and luminance been adjusted correctly? Has the image contrastg been adjusted correctly? Is the lamp due for replacement? Remedy Use the "Brightness" and "Brightness Control" menu commands to adjust the brightness
  • Epson EMP-7900 | User Manual - Page 128
    Problem Solving User's Guide 127 The remote control does not work Check Remedy Is the [R/C] switch at the "ON" position? Set the [R/C] switch to the "ON" position. p.36 Is the remote control light-emitting area facing towards the remote control lightreceiving area when it is operated? Face
  • Epson EMP-7900 | User Manual - Page 129
    problem developed causing the projector to momentarily stop working? Is power being supplied to the projector? Check the network settings for the projector. If using the EMP-7950 "Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide If using the EMP-7900 p.101
  • Epson EMP-7900 | User Manual - Page 130
    Problem Solving User's Guide 129 The projector cannot be monitored and controlled using the EMP Monitor function Check Remedy Is the wireless or wired LAN card inserted? For the EMP-7950 Check that the wireless LAN card is correctly inserted into the card slot of the projector. "Inserting and
  • Epson EMP-7900 | User Manual - Page 131
    Problem Solving User's Guide 130 You cannot connect from another computer when images are being projected during a network connection (EMP-7950 only) Check Remedy Has the person making the presentation left the meeting room without closing the connection? If you try to connect to a projector
  • Epson EMP-7900 | User Manual - Page 132
    Problem Solving User's Guide 131 Check Remedy Is the wireless LAN setting for LAN environments, the correct network adapter to be used by EMP NS Connection must be selected, otherwise it will not be possible to connect. Start EMP NS Connection and select the network adapter from the "Extension"
  • Epson EMP-7900 | User Manual - Page 133
    Problem Solving User's Guide 132 Connection cannot be established in access point mode or wired LAN connection mode (EMP-7950 only) Check Remedy Is the ESSIDg setting correct? Enable the automatic ESSID search function, or set the ESSID for the computer or access point and the projector so
  • Epson EMP-7900 | User Manual - Page 134
    Problem Solving User's Guide 133 Check Are you using DHCPg when in wireless LAN access point mode or wired LAN connection mode? Was EMP NS Connection . The PowerPoint slideshow does not work when using the Network Screen (EMP-7950 only) Check Remedy Are you trying to start Network Screen when
  • Epson EMP-7900 | User Manual - Page 135
    Problem Solving User's Guide 134 When running Microsoft Office applications using Network Screen, the screen does not change as required (EMP-7950 only) Check Remedy Have you been moving the mouse constantly? As long as the mouse cursor is moved, the screen does not change. Stop
  • Epson EMP-7900 | User Manual - Page 136
    Problem Solving User's Guide 135 Check Incorrect keyword. Enter the keyword displayed on the projector. Select a projector from the list. The selected projector is in use. Continue to connect? Failed to initialize EMP NS Connection. Communication error occurred. Do you want to retry connection?
  • Epson EMP-7900 | User Manual - Page 137
    Problem Solving User's Guide 136 Check Remedy There is a projector not responding. One or more projectors failed to connect when an attempt was made to connect simultaneously to multiple projectors. The successfully connected projectors can be used. To connect to the projectors the projector is
  • Epson EMP-7900 | User Manual - Page 138
    Problem Solving User's Guide 137 Error messages from EMP SlideMaker2 (EMP-7950 only) Check **.SIT already registered. already exists in the "Autorun Scenario List". "Sending a Scenario" in the EasyMP Operation Guide The drive to which a scenario is being sent has insufficient free space and the
  • Epson EMP-7900 | User Manual - Page 139
    Problem Solving Error messages from EMP Monitor Check The password is incorrect. Cannot connect to the projector of the IP addressg entered. User's Guide 138 Remedy An incorrect password was entered. Enter the correct password. If you forget the password, check the "Password for WEB control"
  • Epson EMP-7900 | User Manual - Page 140
    140 •Cleaning the Projector Case 140 •Cleaning the Lens 140 •Cleaning the Air Filters and Air Intake Vent 140 • Replacing Consumables 141 •Lamp Replacement Period 141 •Replacing the Lamp 142 •Resetting the Lamp Operating Time 145 •Replacing the Air Filters 146 Saving a User's Logo 148
  • Epson EMP-7900 | User Manual - Page 141
    become damaged. User's Guide 140 Cleaning the Air Filters and Air Intake Vent If dust collects on the air filter or the air outlet, it can cause the internal temperature of the projector to rise, and this can lead to problems with operation and shortening of the optical engine's service life. It
  • Epson EMP-7900 | User Manual - Page 142
    User's Guide 141 • Air filters at side and base of projector Pull the air filters out from the projector and then use a vacuum cleaner to clean them. Replacing Consumables This section describes how to replace the lamp and the air filters. Lamp Replacement Period It is time to replace the lamp
  • Epson EMP-7900 | User Manual - Page 143
    Contact your dealer for a spare lamp. User's Guide 142 Replacing the Lamp CAUTION • If you are replacing the lamp because it has stopped working, it is possible that the lamp is broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the
  • Epson EMP-7900 | User Manual - Page 144
    cover, and turn it. The lock will be released. Slide the screwdriver in until the mark on the lamp cover and the mark on the projector are aligned. Then lift up the lamp cover to remove it. 1 User's Guide 143 3 Loosen the two lamp fixing screws. Use the screwdriver that is supplied with the spare
  • Epson EMP-7900 | User Manual - Page 145
    below and pull the lamp out of the projector. If the lamp is broken, replace it with a new lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful to avoid pieces of broken glass. 2 1 User's Guide 144 5 Install the new lamp. Hold the lamp so that it faces
  • Epson EMP-7900 | User Manual - Page 146
    after the lamp has been replaced. If the lamp operating time is reset at any other time, the lamp replacement period will not be indicated correctly. PROCEDURE 1 Connect the power cable, turn on the projector's power, and then press the [Menu] button on the remote control. The configuration
  • Epson EMP-7900 | User Manual - Page 147
    Maintenance User's Guide 146 2 Select "Reset Lamp Timer" from the "About" menu and then press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel. Lamp (High Brightness) : 0H (Low Brightness) : 0H Reset Lamp T: imer Execute Source :
  • Epson EMP-7900 | User Manual - Page 148
    screwdriver into the hollow as shown in the illustration below, and then pull it straight upwards. The projector has two air filters. Fold out the handle before removing the air filter at the side. User's Guide 147 3 Insert the two new air filters, and push them in until they click into place
  • Epson EMP-7900 | User Manual - Page 149
    control or the projector's control panel. 2 Select the "User's Logo" menu, and then press the [Enter] button on the remote control or the [Auto/ Enter] button on the projector's control panel. Video Audio Effect Setting User's Logo Advanced1 Advanced2 About Reset All Execute User's Guide
  • Epson EMP-7900 | User Manual - Page 150
    ] button on the remote control or the [Auto/ Enter] button on the projector's control panel. User's Guide 149 5 Select "Yes" at the confirmation screen, and then press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel. User's Logo Select this
  • Epson EMP-7900 | User Manual - Page 151
    , and then press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel. The image will then be saved. Once the image has been saved, the message "Completed." will be displayed. User's Logo Save image as user's logo? YES NO If you save it, the
  • Epson EMP-7900 | User Manual - Page 152
    to operate the projector accurately by remote control from a distance. Long throw zoom lens* ELPLL05 (Projection distance ratio: Approx. 2.33-3.15) Medium throw zoom lens* ELPLM03 (Projection distance ratio: Approx. 1.75-2.36) Wide Zoom Lens* ELPLW03 (For EMP-7950NL/7900NL) (Projection distance
  • Epson EMP-7900 | User Manual - Page 153
    ". This is the process by which the projector's lamp is cooled down after it has become hot through use. It is carried out automatically when the [Power] button on either the remote control or the projector's control panel has been pressed to turn the projector off. Do not disconnect the power cord
  • Epson EMP-7900 | User Manual - Page 154
    Access Control address. A MAC address is a unique ID number that is assigned to each network adapter. All network adapters are assigned this unique address, and these are used as the basis for communication between each network adapter. Abbreviation for Network Driver Interface Specification. This
  • Epson EMP-7900 | User Manual - Page 155
    User's Guide 154 RADIUS server Progressive Refresh rate Resize display SDTV Security lock SNMP Squeeze mode sRGB Subnet mask SVGA S-Video SXGA Sync (Synchronisation) RADIUS is an abbreviation for Remote Authentication Dialin User Service and controlled over specific frequency. If the projector
  • Epson EMP-7900 | User Manual - Page 156
    XGA User's Guide 155 Abbreviation for Temporal Key Integrity Protocol. This is an encoding method used for WPAg. The encryption key is renewed after a certain period of time to make it harder to break the encryption code. The signals output from computers have a specific frequency. If the projector
  • Epson EMP-7900 | User Manual - Page 157
    Mute ON/OFF EasyMP (EMP-7950 only) ON OFF SOURCE 50 MUTE ON MUTE OFF Black MSEL 00 A/V Mute Selection Blue MSEL 01 User's Logo MSEL 02 Flow control • Connector shape • Projector input port : 9600 bps : 8 bits : None : 1 bit : None : D-Sub 9-pin (male) : Control (RS-232C) User's Guide 156
  • Epson EMP-7900 | User Manual - Page 158
    connector : D-Sub 9-pin (male) : Control (RS-232C) USB connection • Connector shape : USB(type B) (type B) User's Guide 157 * The [USB Type A] port (EMP-7950 only) cannot be used as a USB hub. (PC serial cable)
  • Epson EMP-7900 | User Manual - Page 159
    List of ESC/VP21 Commands User's Guide 158 USB Connection Setup In order to control the projector using ESC/VP21 commands via a USB connection, the following preparations must be carried out. PROCEDURE 1 Download the USB driver (USB-COM Driver) from the EPSON website to your computer. The URL
  • Epson EMP-7900 | User Manual - Page 160
    List of Supported Monitor Displays User's Guide 159 Computer/RGB Video Signal VGAEGA Refresh rateg ( to project signals which are not listed in the above table. However, not all functions may be supportable with such signals. Component Video Signal SDTVg(525i, 525p, 625i, 625p) HDTVg(750p) 16:9
  • Epson EMP-7900 | User Manual - Page 161
    temperature Storage temperature Weight Connectors DVI Computer Audio input USB*2 BNC Audio input S-Video Audio input Video Audio input User's Guide 160 Multimedia Projector EMP-7950/7950NL *Model lineup varies depending on the country. Multimedia Projector EMP-7900/7900NL *Model lineup varies
  • Epson EMP-7900 | User Manual - Page 162
    Specifications User's Guide 161 Control (RS-232C) 1 D-Sub 9-pin (male) Remote 1 Stereo mini jack Monitor Out 1 Mini D-sub 15-pin (female) Black Audio Out 1 Stereo mini jack Network - 1 RJ-45 Card Slot PCMCIA TypeII slot × 1 - Supported Memory Cards by Projector's •CompactFlash cards
  • Epson EMP-7900 | User Manual - Page 163
    Appearance 51 138 117 10 Centre of lens 325 63.5* 1 129 422 *Distance from center of lens to suspension bracket fixing point User's Guide 162 322 80 10 180 4-M4 × 10 65 Units: mm
  • Epson EMP-7900 | User Manual - Page 164
    Name :EPSON Type of Product :Projector Model :EMP-7950/EMP-7950NL EMP-7900/EMP-7900NL FCC Compliance Statement For United States Users This energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However,
  • Epson EMP-7900 | User Manual - Page 165
    mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
User’s Guide