Epson ES-600C Product Support Bulletin(s)

Epson ES-600C Manual

Get Epson ES-600C PDF manuals and user guides View all Epson ES-600C manuals
Add to My Manuals
Save this manual to your list of manuals

Epson ES-600C manual content summary:

  • Epson ES-600C | Product Support Bulletin(s) - Page 1
    scanner. Reason: Epson Customers may need to replace these thumbscrews because they are missing or misplaced. Epson Dealers and Customer Care Centers may call Technical Support the same. These screws are used on the following scanners and options: ES-600C/800C/1000C/1200C options (ADF & TPU), and
  • Epson ES-600C | Product Support Bulletin(s) - Page 2
    v1.03 and lower will not work with the Epson ES-1200C scanner. You must use TWAIN 2.02 or higher. If you are using the ES-1200C with a program that has Epson scanner support, you may need install the EPSN.SYS device driver for that Windows session. To do this, follow steps 6 through 16 below. You
  • Epson ES-600C | Product Support Bulletin(s) - Page 3
    In order for either of the Epson TWAIN drivers to function in a Windows session under OS/2, you must install support for your ASPI compliant SCSI card under OS/2 first. For installation instructions, refer to your OS/2 manual. Once you have installed support for your ASPI compliant card under
  • Epson ES-600C | Product Support Bulletin(s) - Page 4
    driver will not load thus causing VASPI.SYS not to load. If this occurs, double check your card's configuration and the SCSI cabling. Epson TWAIN v1.0x Follow the steps below to enable Epson TWAIN the window to the right, add the EPSN.SYS driver. X represents the appropriate SCSI ID of the scanner.
  • Epson ES-600C | Product Support Bulletin(s) - Page 5
    will run properly. Epson TWAIN v2.xx There is no special procedure required to setup this version of the driver to run in a Windows session under OS/2 Warp. Simply launch Windows and install the driver. Follow the procedures outlined in the user's manual. If the driver does not install properly
  • Epson ES-600C | Product Support Bulletin(s) - Page 6
    AMERICA, INC. EPSON Product Support Bulletin Subject: Image Editing Terms Date: 6/5/91 Page(s): 1 of 3 PSB No: P-0078 Originator: RS The following terms' are used to describe image editing and grayscale in connection with scanners, monitors and printers. Additive Primary Colors: The colors
  • Epson ES-600C | Product Support Bulletin(s) - Page 7
    light intensity ratio between the original image and the output data. The ES-300C scanner allows the function to be altered so that when the image is reproduced Halftones are used in newspapers to display photographs. The Epson ES-300C supports 3 types of halftoning. The brightest value in a
  • Epson ES-600C | Product Support Bulletin(s) - Page 8
    unit of measuring resolution. Pixel size is relative, due to the output device. For example, a monitor pixel may be different in size compared to a scanner pixel. Pixels can be measured absolutely when fixed to another standard, like pixels per inch. Posterize: To limit the number of shades in an
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Page
1 of 1
EPSON
P
RODUCT
S
UPPORT
B
ULLETIN
Date:
04/07/2003
Originator:
TC
PSB #:
PSB.2003.04.004
Authorization:
Reference:
N/A
Total Pages:
1
Product(s):
EPSON Scanner Options
Subject:
Part numbers for transparency adapter mounting screws (thumbscrews)
This bulletin was created to inform you of the part numbers used for the thumbscrews (mounting
screws) that secure the transparency units to the scanner.
Reason
:
Epson Customers may need to replace these thumbscrews because they are missing or
misplaced. Epson Dealers and Customer Care Centers may call Technical Support for assistance
in locating the reference or part number for the thumbscrews. The location of the thumbscrews on
the Product diagram is on the right hand side, and is often overlooked (See red box below)
The correct part and reference numbers for the Expression 1600/1680 Transparency Unit
(B813182) lock-down thumbscrews are respectively: 1012588 and 815. The Parts Price List (PPL)
description is S. THUMB SCREW M4X10 F/NI, Quantity = 2.
Note:
The part number is subject to change but the reference number will remain the same.
These screws are used on the following scanners and options: ES-600C/800C/1000C/1200C
options (ADF & TPU), and the Expression 636/800/1600/1680 options (ADF & TPU). The part and
reference number for Expression 1600/1680 Transparency Unit (B813182) can be used to order
replacement thumbscrews for all models and options listed above.