Epson FX-85 User Manual - Page 51
DIP Switches, ESCape C.
View all Epson FX-85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
* 2K buffer available for user-defined characters * l Paper-out sensor on * Non-slashed zero (although there's no code for "turning on" slashed zero, you can slash one zero at a time with backspace) * Carriage return issued at the end of a line without an automatic line feed l Bidirectional movement of the print head * l Skip-over-perforation feature off * Beeper on (turning off the paper-out sensor deactivates the beeper for this function but not for others) Top of form occurs at the position of the print head when you reset the printer-by turning power on or by issuing an ESCape "@"-or when you change the form length with either format of ESCape "C". DIP Switches The FX printers have two sets of internal switches which are used by the printer to determine the default mode on power-up. The switches are under the upper right vent. As outlined in Chapter 1, the vent screw must be removed with a Phillips-head screwdriver in order to take the cover off. Since switch settings are only checked by the printer on power-up, all switch setting should be done with the power off. The printer will not recognize changes made in switch settings when the power is on until the printer is turned off and then on again. The factory sets and numbers the switches in the following way: 296