Epson KDS Expansion Box KD-IB01 KDS Quick User Manual - Adding a Display
Epson KDS Expansion Box KD-IB01 Manual
 |
View all Epson KDS Expansion Box KD-IB01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson KDS Expansion Box KD-IB01 manual content summary:
- Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Adding a Display - Page 1
that you already have a Single Station KDS system setup as described in the Epson KDS Single-Station Quick Start Guide. This guide is relevant for: KDS FW: v2.50 and above KDS Utility (Windows): v2.5.0.0 and above Overview Additional KDS Printers or Controllers can be easily added - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Adding a Display - Page 2
Configure Multi-station KDS systems require all devices to be connected on a local network. This guide assumes your new device has been connected to the network with your existing KDS printer. 4. Click "OK". Figure 1.1 - Adding a display Adding a Display Quick User Manual 111-38-QUM-019 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Adding a Display - Page 3
5. Assign Display Tile to Display Figure 1.2 - Assign Display Tile Adding a Display Quick User Manual 111-38-QUM-019 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Adding a Display - Page 4
Device 4. In Display Manager, ensure that Display 2 is selected in the Assigned Display drop-box. Figure 2.2 - Assigning Display to new Device Adding a Display Quick User Manual 111-38-QUM-019 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Adding a Display - Page 5
5. Click Apply KDS Settings Figure 2.3 - Apply KDS Settings Adding a Display Quick User Manual 111-38-QUM-019 Rev 2.50
-
1 -
2 -
3 -
4 -
5
 |
 |
111-38-QUM-019
Rev 2.50
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. All other
product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all
rights in these marks. Copyright 2022 Seiko Epson Corporation.
Adding a Display
About this Guide
This guide consists of 2 sections:
•
Overview
•
How to Configure
–
A procedure that can be followed to add a new
device/display to your KDS system.
This guide assumes that you already
have a Single Station KDS system setup as described in the Epson KDS
Single-Station Quick Start Guide.
This guide is relevant for:
KDS FW:
v2.50 and above
KDS Utility (Windows):
v2.5.0.0 and above
Overview
Additional KDS Printers or Controllers can be easily added to a Single Station KDS to
turn it into a Multi-Station KDS.
Point of Sale
Laptop/PC/Tablet
USB Cable.
RS232, USB , or Ethernet
VGA Cable
Ethernet Cable
Omnilink
Figure 0.1
–
Additional controller added to Single Station KDS