Epson KDS Expansion Box KD-IB01 KDS Quick User Manual - Bump and Print
Epson KDS Expansion Box KD-IB01 Manual
 |
View all Epson KDS Expansion Box KD-IB01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson KDS Expansion Box KD-IB01 manual content summary:
- Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Bump and Print - Page 1
assumes you already have a Single or Multi-Station system setup as described in the Epson KDS Quick Start Guides. This guide is relevant for: KDS FW: v2.50 and above KDS Utility (Windows): v2.5.0.0 and above Overview A KDS printer can be configured to bump and print - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Bump and Print - Page 2
/or "Print Tile on Bump" 4. Click Apply KDS Settings. The KDS printer is now configured for bump and print functionality. Bump and Print Quick User Manual 111-38-QUM-012 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Bump and Print - Page 3
is some special processing done that allows non-ASCII characters to be added to the text. The following sequences are all supported: • \n - line feed • \t - tab • \v - vertical tab • \xnn - hexadecimal code • \ will center the header. Bump and Print Quick User Manual 111-38-QUM-012 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Bump and Print - Page 4
the 'ESC 2' command, you need to use \033\062 or something similar, because \0332 will be read as a single character. Bump and Print Quick User Manual 111-38-QUM-012 Rev 2.50
-
1 -
2 -
3 -
4
 |
 |
111-38-QUM-012
Rev 2.50
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. All other
product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all
rights in these marks. Copyright 2022 Seiko Epson Corporation.
Bump and Print
About this Guide
This guide consists of 2 sections:
•
Overview
•
How to Configure -
A procedure that can be followed to configure this in a KDS
system.
This guide assumes you already have a Single or Multi-Station system
setup as described in the Epson KDS Quick Start Guides.
This guide is relevant for:
KDS FW:
v2.50 and above
KDS Utility (Windows):
v2.5.0.0 and above
Overview
A KDS printer can be configured to bump and print labels for individual items and/or
entire orders.
This can be configured individually for any KDS printer in the system.