Epson KDS Expansion Box KD-IB01 KDS Quick User Manual - Master Printer
Epson KDS Expansion Box KD-IB01 Manual
View all Epson KDS Expansion Box KD-IB01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson KDS Expansion Box KD-IB01 manual content summary:
- Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Master Printer - Page 1
to be followed to select Master Printer/Controller within a Multi-Station KDS Setup. • Appendix - System diagrams for KDS and POS menu routing. This guide is relevant for: KDS FW: v2.50 and above KDS Utility (Windows): v2.5.0.0 and above Overview Every Epson KDS must have one device designated as - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Master Printer - Page 2
and the green POS ATTACHED label will be added to the device. 5. Click Apply KDS Settings. Figure 1.2 - Configure Device As Master Master Device Quick User Manual 111-38-QUM-023 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Master Printer - Page 3
- KDS Menu Routing Point of Sale Laptop/PC/Tablet Omnilink USB Cable. VGA Cable Ethernet Cable Figure A2 - POS Menu Routing Master Device Quick User Manual 111-38-QUM-023 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Master Printer - Page 4
POS type and IP Address configuration mode as prompted. 2. KDS Utility will detect available devices. 3. Click Next. Figure B2 - Discover Devices Master Device Quick User Manual 111-38-QUM-023 Rev 2.50 - Epson KDS Expansion Box KD-IB01 | KDS Quick User Manual - Master Printer - Page 5
Step 3: Select Master Device 1. In the dropdown menu select Master Device. 2. Click Next. Figure B3 - Discover Devices Master Device Quick User Manual 111-38-QUM-023 Rev 2.50
111-38-QUM-023
Rev 2.50
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. All other
product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all
rights in these marks. Copyright 2022 Seiko Epson Corporation.
Master Device
About this guide
This guide consists of 3 sections:
•
Overview
–
Describes the Master device selection.
•
How to select the Master Device
–
A procedure to be followed to select Master
Printer/Controller within a Multi-Station KDS Setup.
•
Appendix
–
System diagrams for KDS and POS menu routing.
This guide is relevant for:
KDS FW:
v2.50
and above
KDS Utility (Windows):
v2.5.0.0 and above
Overview
Every Epson KDS must have one device designated as the Master,
POS Attached
printer/controller.
In systems with just one device the choice is automatic and there is
nothing to configure.
In multi-station systems that have more than 1 device you will need
to designate one as the Master,
POS Attached
printer/controller.
Which one to configure
depends on your multi-station routing method:
•
KDS Menu Routing
–
All print jobs are sent directly to the main device - printer
or controller.
The menu configuration and routing determine which stations items
in an order are sent to.
This device needs to be the Master,
POS Attached
printer/controller.
•
POS Menu Routing
–
All print jobs are sent from the POS directly to their
intended display stations.
The POS determines which items are sent where and all
menu management remains on the POS.
The Master,
POS Attached
printer/controller is either:
1.
The printer/controller that does not have a display attached to it and is thus
not receiving any orders from the POS.
2.
If all devices have a display then any device can be selected as the Master.