Epson KDS Expansion Box KD-IB01 KDS Quick User Manual - Network Settings

Epson KDS Expansion Box KD-IB01 Manual

Epson KDS Expansion Box KD-IB01 manual content summary:

  • 1
  • 2

111-38-QUM-022
Rev 2.50
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. All other
product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all
rights in these marks. Copyright 2022 Seiko Epson Corporation.
Network Settings
About this Guide
This guide consists of 2 sections:
Overview
How to Configure -
A procedure that can be followed to configure this in a KDS
system.
This guide assumes you already have a Single or Multi-Station system
setup as described in the Epson KDS Quick Start Guides.
This guide is relevant for:
KDS FW:
v2.50 and above
KDS Utility (Windows):
v2.5.0.0 and above
Overview
By default, KDS devices ship DHCP enabled, allowing them to be easily added and
discovered on the local network.
It may be necessary to configure the devices to a static
IP and this guide explains how to do that from the Windows Configuration Utility.
While
the IP can be referenced from the Utility, it is also conveniently displayed on the KDS
device startup splash screen:
Figure 0.1
Startup screen of the KDS