Epson LQ-200 Product Support Bulletin(s)
Epson LQ-200 - Impact Printer Manual
 |
View all Epson LQ-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson LQ-200 manual content summary:
- Epson LQ-200 | Product Support Bulletin(s) - Page 1
NOTE: Most of the beeps issued by the printers are of .1 second duration with a .1 second pause between beeps. Where the beeps or the pauses are longer, it has been noted in the text. The description "3 Beeps x 2" means two sets of three beeps. LQ-200/AP-3000 1 beep: BEL code 1 beep: A Control - Epson LQ-200 | Product Support Bulletin(s) - Page 2
, L750 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: LQ-860 1 beep: 1 beep: 3 beeps: 5 beeps: 5 beeps: 5 beeps: LQ-1500 1 beep: 5 beeps: 5 beeps: PSB No: P-0076 Page: 2 of 4 BEL code A Control Panel setting is accepted Paper End detected Abnormal carriage movement (.5 sec. pause between beeps) +35V - Epson LQ-200 | Product Support Bulletin(s) - Page 3
3 of 4 LQ-2500 NOTE: Printers with LCD displays use error messages along with beeps to inform the user of problems. The following messages will help you to troubleshoot problems. A blank LCD screen with the Power-on LED lit can be caused by a bent pin on one of the PROMS or jumper J1 may be set - Epson LQ-200 | Product Support Bulletin(s) - Page 4
by turning the printer off, taking out the paper and turning the printer back on. Both settings on the ROMA board may cause errors 10 or 20. The correct settings are documented in the Service Manual (page A-54, figure A-52) and on TIB LQ2550-005. Errors 0,2, 3, 10, and 20 may require a repair - Epson LQ-200 | Product Support Bulletin(s) - Page 5
EPSON AMERICA, INC. EPSON Product Support Bulletin Subject: Quick Reference for Printer Acoustic Noise PRINTERS MODEL I LX-810 FX-850 FX-1050 I DFX-5000 I DFX-8000 1 NOISE LEVEL 56 dB(A) II 56 dB(A) 56 dB(A) I 55 dB(A) II I 55 dB(A) II 24 PIN PRINTERS LQ-510 56 dB(A) LQ-1010 56 dB(A) 11 LQ - Epson LQ-200 | Product Support Bulletin(s) - Page 6
PSB No: P-0016D Page: 2 of 2 MODEL LQ-860 LQ-1050 LQ-2550 NOISE LEVEL 55 dB(A) 55 dB(A) 55 dB(A) LASER PRINTERS
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
EPSON AMERICA, INC.
EPSON
Product Support Bulletin
Subject:
24 Pin Printer Error and Beep Codes
Date: 4/3/91
PSB No: P-0076
Page(s): 1 of 4
Originator JV
Epson printers issue beep tones when certain error conditions exist. Those beeps
can assist you in locating and repairing customer’s printers. The following error
codes are listed by product name.
NOTE:
Most of the beeps issued by the printers are of .1 second duration with a .1
second pause between beeps. Where the beeps or the pauses are longer,
it has been noted in the text. The description “3 Beeps x 2” means two sets
of three beeps.
LQ-200/AP-3000
1 beep:
BEL code
1 beep:
A Control Panel setting is accepted.
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement
On-Line light is flashing:
Printhead is over heated. Carriage will stop until
the printhead cools down.
LQ-500, LQ-510, LQ-1010, LQ-850, LQ-950, LQ-1050,
L1000, AP-4000, AP-4500
1 beep:
BEL code (.5 set beep)
1 beep:
A Control Panel setting is accepted
3 beeps:
Paper End detected
5 beeps:
Abnormal carriage movement