Epson NX110 Start Here

Epson NX110 - Stylus Color Inkjet Manual

Get Epson NX110 - Stylus Color Inkjet PDF manuals and user guides View all Epson NX110 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson NX110 manual content summary:

  • Epson NX110 | Start Here - Page 1
    , contact Epson as described on the back. Note: The model name of your product may vary slightly from the one shown above. The included CD and documentation apply to all products in the series. Caution: Do not open the ink cartridge package until you are ready to install the ink. Cartridges are
  • Epson NX110 | Start Here - Page 2
    3 Install cartridges Note: Do not load paper yet. 1 Lift up the scanner and prop it up with the support. 2 Shake the ink cartridges, then unpack them. 3 Remove only the yellow tape from each cartridge. Caution: Do not remove any other seals or the cartridge may leak. 4 Insert the cartridges in the
  • Epson NX110 | Start Here - Page 3
    about 2 minutes. Caution: Don't turn off the NX110 Series while it is charging or you'll waste ink. Note: Your printer ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. 4 Load paper 1 Open the paper support. 2 Open the output tray and pull out
  • Epson NX110 | Start Here - Page 4
    3 Flip the feeder guard forward. Then squeeze the edge guide and slide it left. 4 Load paper against the right edge and underneath the tab, then slide the edge guide over. 8½ 11 4 6 Note: Don't load the paper sideways. Always load it short edge first. 5 Flip the feeder guard back.
  • Epson NX110 | Start Here - Page 5
    a moment, make sure you securely connected and turned on the NX110 Series. 6 Follow the on-screen instructions to install the rest of the software and register your NX110 Series. 7 When you're done, remove the CD. You're ready to print, copy, and scan! See your on-screen Epson Information Center for
  • Epson NX110 | Start Here - Page 6
    , click Add Printer. 8 Follow the steps on the right of the screen to add the NX110 Series. 9 Click Next again, if necessary. 10 Follow the on-screen instructions to install the rest of the software and register your NX110 Series. 11 When you're done, eject the CD. You're ready to print, copy, and
  • Epson NX110 | Start Here - Page 7
    Turn power on/off Paper light Ink light Cancel printing Scan a document or photo Copy a black and white document or photo Then save the file on your computer. See your on-screen Epson Information Center for more information. To copy • For black and white, press B&W Copy. • For color, press Color Copy
  • Epson NX110 | Start Here - Page 8
    to the NX110 Series user's guide, FAQs, online troubleshooting advice, and software downloads. You can also purchase paper and ink. On-screen help with your software Select Help or ? when you're using your software. Epson Technical Support Internet Support: Visit Epson's support website at epson.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Unpack
(Included for Canada only)
If anything is missing, contact Epson as described on the back.
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open the ink cartridge package until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only:
For French speakers, remove stickers from the backing sheet and
place over corresponding text on the control panel.
Remove all the protective materials.
1
Start Here
Read these instructions before using the printer.
Series
2
Turn on the NX110 Series
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.