Epson PowerLite 1950 Quick Setup
Epson PowerLite 1950 Manual
 |
View all Epson PowerLite 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 1950 manual content summary:
- Epson PowerLite 1950 | Quick Setup - Page 1
PowerLite® 1940W/1950/1960 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer DisplayPort cable VGA cable - Epson PowerLite 1950 | Quick Setup - Page 2
image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot - Epson PowerLite 1950 | Quick Setup - Page 3
notice. Toll or long distance charges may apply. Internet support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Registration Register today to - Epson PowerLite 1950 | Quick Setup - Page 4
applies only to the projector and not to the projector lamp, which carries a limited warranty period of ninety (90) days from the date of original purchase. For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: If your product requires
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide
for details.
Computer
VGA cable
USB cable
HDMI cable
DisplayPort cable
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
2000 SP4 or later:
After turning on the projector, follow
the on-screen instructions to install the EPSON
®
USB Display software
(
EMP_UDSE.EXE
; only on first connection).
Note:
If the software screen does not display automatically, open
My
Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
Mac OS X 10.5.1 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the EPSON USB Display software
(only on first connection).
Monitor port
Connect one end of a VGA cable to the projector’s
Computer1
or
Computer2
port, and the other end to your computer’s
monitor port. If
you are using a laptop, switch it to external display (see “Troubleshooting”).
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
DisplayPort
Connect one end of a DisplayPort cable to the projector’s
DisplayPort
and the
other end to a DisplayPort on your computer.
Wired network
You can connect the projector to your network using an Ethernet
®
cable.
See “Project over a wired network” for instructions.
Video device
Connect up to 4 video devices and use the
Source Search
button on the
projector or remote control to switch between them.
RCA video cable (composite video)
Component video to VGA cable
Audio cable
Audio cable
HDMI cable
Camera, USB device, or EPSON document camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or EPSON
document camera DC-06 to the projector’s
USB-A
(flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s Slideshow feature to project images. See the online
User’s
Guide
for details.
External monitor and external speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns orange.
3
Open the
A/V Mute
slide all the way.
PowerLite
®
1940W/1950/1960
*412289800*
*412289800*