Epson PowerLite 73c Quick Start
Epson PowerLite 73c Manual
 |
View all Epson PowerLite 73c manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 73c manual content summary:
- Epson PowerLite 73c | Quick Start - Page 1
cables: EPSON® PowerLite® 53c/73c Quick Setup TART S Power cord Computer cable 1 Make sure your projector and laptop are turned off. 2 Connect one end of the computer cable to the Computer/Component Video port on the projector. Monitor Out Computer/ Component Video S-Video Video Audio1 - Epson PowerLite 73c | Quick Start - Page 2
Electronic Support Services EPSON provides technical assistance through electronic support services 24 hours a day at http://support.epson.com. For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com. Quick Setup EPSON® PowerLite® 53c/73c If
-
1 -
2
 |
 |
1
Remove the lens cover.
2
Connect the power cord to your projector and plug
the other end into an electrical outlet.
3
Press the
Power
button. The Power light
flashes green, and then stays on.
4
Turn on or restart your laptop. (Windows
®
only:
If you see this Add New Hardware screen,
click
Cancel
.)
S
T
A
R
T
H
E
R
E
Turn over
T
urn on your equipment
C
onnect the projector
to your laptop
Power cord
Computer cable
Follow these instructions to connect the projector
to your laptop. To connect other devices, such as
a VCR, DVD, or desktop PC, see your
User’s Guide
.
EPSON
®
PowerLite
®
53c/73c
Quick Setup
Lens cover
Caution:
Before unplugging
the projector...
To shut the projector down properly:
1.
Press the
Power
button twice.
Let the projector cool while the
Power light flashes orange
(about 45 seconds).
2.
Once the light stops flashing and
stays on, it’s safe to unplug
the projector.
Never unplug the projector when
the Power light is green or
flashing orange.
For most setups, you’ll need just these two cables:
Power light
1
Make sure your projector and laptop are turned off.
2
Connect one end of the computer cable to the
Computer/Component Video
port on the projector.
3
Connect the other end to your laptop’s video or
monitor port.
If you can’t connect the cable to your PowerBook,
®
you may need
to use an adapter. See your
User’s Guide
for instructions.
Monitor Out
S-Video
Video
Audio1
L Audio2 R
Control
(RS-232C)
Computer/
Component Video