Epson PowerLite 79 Start Here
Epson PowerLite 79 Manual
 |
View all Epson PowerLite 79 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 79 manual content summary:
- Epson PowerLite 79 | Start Here - Page 1
PowerLite® S7/79/W7 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. - Epson PowerLite 79 | Start Here - Page 2
CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. Where to get help Manual For more information about using the projector, install the User's Guide from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call
-
1 -
2
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide
on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector’s
Computer (Component Video)
port,
and the other end to your computer’s
monitor port. If you are using a
notebook, switch it to external display. You can also connect an audio cable.
Computer USB Port (Windows
®
only)
Connect a computer using a USB cable (not included).
Connect the square end of the USB cable to the projector’s
Type B
(square) USB port. Connect the flat end of the cable to any USB port on your
computer. You can also connect an audio cable.
Follow the on-screen instructions to install the Epson USB Display software
(only on first connection). Then press the
USB
button on the remote control.
NOTE:
If the software does not install automatically, open
My Computer
or
Computer
, double-click
EPSON_PJ_UD
, then double-click
EMP_UDSE.EXE
.
External Monitor
Connect a monitor to the
Monitor Out
port.
NOTE:
To use an external monitor, your computer must be connected to the
Computer (Component Video)
port, not the USB port.
Video Player
Connect up to 3 video devices and use the remote control to switch between
them.
RCA video cable
(composite video)
(optional)
S-Video
cable
(optional)
Component video
to VGA cable
(optional)
Audio out cable
(optional)
Audio in cable
(optional)
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button on the projector or remote control.
Power light
Power button
The
power light flashes green, then stays on.
NOTE:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
Adjust the image
1
If you don’t see an image, press the
Source Search
button on the
projector or remote control to select the image source.
NOTE:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
PowerLite
®
S7/79/W7
*411760900*
*411760900*