Epson PowerLite 8100NL RS-232 Reference Manual (ESC/VP)
Epson PowerLite 8100NL Manual
 |
View all Epson PowerLite 8100NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 8100NL manual content summary:
- Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 1
(Abridged Edition) ESC/VP Level 6 Serial Communication Manual (Abridged Edition) Ver.3 Table of Contents REVISION STATUS...2 6. CONTROL CODE ...9 00 SPECIAL CONTROL 9 03 : Power 06 : Communication rate 09 : Lamp Hour 12 : Error information 16 : Key codes 01 SCREEN CONTROL 11 00 : Input Source - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 2
Clerical error correction. The power on command of EMP-7600/5600. Addition audio control commands 1. OUTLINE This manual describes the ESC/VP Level 6 protocol for communication with projectors manufactured by Seiko Epson. The manual is an abridged edition which summarizes the most commonly-used - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 3
PC 8 12 9 13 (RS-232C D-sub 9pin) [Serial cable connection diagram] (Projector) GND 13 RD 9 TD 8 DTR 10 DSR 11 (Main cable) (Projector) GND 5 RD 2 TD 3 DTR 4 DSR 6 (Main cable) (Computer serial cable) 55 5 GND 22 3 TD 33 2 RD 44 6 DSR - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 4
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 4. COMMAND TYPES The types of commands used can be divided into apply commands and reply commands. Both of these command types can be - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 5
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 5. COMMAND STRUCTURE • ECommands are expressed as hexadecimal codes. • All commands start with an ID code and end with a checksum. When an ESC/VP command which is sent from the computer is received by the projector, a reply is returned. - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 6
codes (bit) Machines PC (RS-232C communication) Master projector or stand-alone projector Code (bit) 0x00 0x01 The apply/reply codes using FromTo 0x07 0x08 0x09 0x0E 0x0F 0x10 0x20 * Refer to the full manual if using stack control. Caption Performs switching and resetting the operating mode - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 7
Item Functional Code classification Power Communication rate Initialize all Lamp on Cursor Speed Password Error Information Administrator Log on for Master projector or Stand-alone projector only : Valid for Master projector only : Commands listed in the abridged manual Function Brightness - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 8
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) (7) Parameters : Parameters differ for each Command is not supported, or unknown command. Insufficient EasyMP.net resources. Projector is in download mode. The apply command received cannot be processed. Projector lamp is switched off. - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 9
of EMP-7600/5600, and the projector error information. [Parameter] Projector error information The following data is set with an OR: 0x00: No error or error is cancelled. 0x01: Fan problem 0x04: Internal temperature is abnormally high. 0x08: Lamp life expectancy is closed to end. 0x20: Lamp problem - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 10
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 00 SPECIAL CONTROL Command structure Type STX Apply Size Attribu From te To Group Item Param Checketer sum STX Size Reply Attribu From - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 11
Manual ) 0x40: BNC (YCrCb) 0x50: DVI 0x10: PC1 0x11: PC2 (RGB) 0x12: Component Video 0xE2: PAL 0xE8: YCrCb(50Hz) 0xD0: Not Supported 0xE3: PALN 0xE9: YCrCb(60Hz) Set 1D 02 : Freeze (* Only valid for Standalone/Master projector) Controls the Freeze. Freeze ON: Freezes the - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 12
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 02 AUDIO CONTROL Command structure Type STX Apply Size Attribu FromT te o Group Item Param checketer sum STX Size Reply Attribu te FromT o - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 13
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 03 PC CONTROL Command structure Type STX Apply Size Attribu From te To Group Item Param Checketer sum STX Size Reply Attribu From - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 14
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 03 PC CONTROL Command structure Type 0009 000A 83 C3 10 03 0E 12 : Automatic setup (* Only valid for Standalone/Master projector) Reports the start and end of automatic setup. [Parameter] Data relating to automatic setup status, - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 15
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 04 VIDEO CONTROL Command structure Type STX Apply Size Attribu From te To Group Item Param Checketer sum STX 00 : Brightness Controls the - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 16
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 04 VIDEO CONTROL Command structure Type STX Apply Size Attribu From te To Group Item Param Checketer sum STX Size Reply Attribu From - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 17
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 05 DISPLAY CONTROL Command structure Type STX Apply Size Attribu From te To Group Item Param Checketer sum STX 02 : Rear Proj. Controls - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 18
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 06 OPTION Command structure Type STX Apply Size Attribu From te To Group Item Param Checketer sum STX Size Reply Attribu From te - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 19
Communication Manual ) Controls the DelayOn ON/OFF setting. When set to ON, the lamp is on when power is being supplied through the power cable. When 16 PARA CS 19 : Computer2 input format (Applicable models: EMP-7600/5600) Controls the input format for the Computer2 terminal. [Parameter] Data - Epson PowerLite 8100NL | RS-232 Reference Manual (ESC/VP) - Page 20
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 07 CUSTOM Command structure 0008 03 01 07 08 -- CS 1D 09 : PinP audio selection setting (Applicable models: EMP-7600/5600) Controls the audio selections which are enabled for PinP. [Parameter] Audio enabled for PinP 0x00: Main
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
ESC/VP Level 6 Serial Communication Manual (Abridged Edition)
1 of 20
ESC/VP Level 6 Serial Communication Manual (Abridged Edition) Ver.3
Table of Contents
REVISION STATUS
....................................................................................................................................................
2
1. OUTLINE
................................................................................................................................................................
2
2. APPLICATION
........................................................................................................................................................
2
3. SERIAL COMMUNICATION SPECIFICATIONS
...................................................................................................
3
4. COMMAND TYPES
................................................................................................................................................
4
5. COMMAND STRUCTURE
......................................................................................................................................
5
6. CONTROL CODE
...................................................................................................................................................
9
[Communication Conditions]
[Connectors]
[Serial cable connection diagram]
00 SPECIAL CONTROL
...............................................
9
03 : Power
06 : Communication rate
09 : Lamp Hour
12 : Error information
16 : Key codes
01 SCREEN CONTROL
.............................................
11
00 : Input Source
01 : Input mode
02 : Freeze
03 : A/V Mute
02 AUDIO CONTROL
.................................................
12
00 : Volume
06 : Bass
07 : Treble
08 : SRS SPACE
09 : SRS CENTER
03 PC CONTROL
.......................................................
13
00 : Brightness
01 : Contrast
02 : Sync.
03 : Tracking
0D : Sharpness
0E : Input Resolution
12 : Automatic setup
04 VIDEO CONTROL
.................................................
15
00 : Brightness
01 : Contrast
02 : Sharpness
03 : Saturation
04 : Tint
05 : Video Mode
06 : Smooth Motion
05 DISPLAY CONTROL
.............................................
17
02 : Rear Proj.
03 : Ceiling
06 OPTION
.................................................................
18
03 : Source Prompt
04 : Blank
09 : BNC Input Source Type
0F : Keystone
10 : Start up Screen
11 : Message
14 : V Keystone
15 : DelayON
16 : Comp1/DV1 selection
19 : Computer2 input format
07 CUSTOM
...............................................................
20
08 : PinP
09 : PinP audio selection setting