Epson PowerLite Cinema 550 Product Information Guide
Epson PowerLite Cinema 550 Manual
 |
View all Epson PowerLite Cinema 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite Cinema 550 manual content summary:
- Epson PowerLite Cinema 550 | Product Information Guide - Page 1
Epson PowerLite Cinema 550 Projector Parts Projector Specifications Control panel Horizontal lens shift 26 dB (Theater Black color mode) Lamp Type UHE (Ultra High Efficiency), E-TORL Power consumption 170 W Lamp life 1700 to 3000 hours, depending on usage Part number V13H010L35 Remote - Epson PowerLite Cinema 550 | Product Information Guide - Page 2
http://support.epson.com. Projecting a Square Image For best image quality, place the projector at a height where its lens is between the top and bottom of the screen. This lets you keep the projector level and use the vertical lens shift dial to position the image. 2 - Epson PowerLite Cinema 550 - Epson PowerLite Cinema 550 | Product Information Guide - Page 3
projectors from the Epson website at http://support.epson.com. Following are some of the available codes: Item Power ON/OFF A/V Mute ON/OFF A/V Mute selection ON OFF ON OFF Black Blue User's Logo Command PWR ON PWR OFF MUTE ON MUTE OFF MSEL 00 MSEL 01 MSEL 02 11/05 Epson PowerLite Cinema 550 - Epson PowerLite Cinema 550 | Product Information Guide - Page 4
(see page 6) Mini D-sub, 15-pin monitor cable HDMI cable Supported video formats Analog TV (NTSC, PAL, SECAM) Analog TV projector is turned on, and can be used to raise or lower a projection screen automatically. ❏ Connect a 3.5-mm mini jack to the port, as shown. 4 - Epson PowerLite Cinema 550 - Epson PowerLite Cinema 550 | Product Information Guide - Page 5
projector. Epson PowerLite Cinema 550 Turning Off the Projector 1. Turn off any equipment connected to the projector. 2. Press the Off button on the remote control (or press the PPower button on the projector twice). 3. Let the projector cool for about 30 seconds. 4. Once the light stops flashing - Epson PowerLite Cinema 550 | Product Information Guide - Page 6
Epson PowerLite Cinema 550 If you press the Source button on the projector letting you quickly optimize the image for various lighting environments. 1. Select the image source you want the right and left sides of the image; the central part is unchanged. ❏ Squeeze for recordings made in a compressed - Epson PowerLite Cinema 550 | Product Information Guide - Page 7
720 1280 × 720 1280 × 720 Wide 1280 × 720 1280 × 720 1280 × 720 1280 × 720 1280 × 720 - 1280 × 720 1280 × 720 1280 × 720 Through 640 × 480 640 × 480 800 × 600 - - - 640 × 480 832 × 624 - Squeeze Through 853 × 480 853 × 480 1066 × 600 - - - 853 × 480 1109 × 624 - 11/05 Epson PowerLite Cinema 550 - Epson PowerLite Cinema 550 | Product Information Guide - Page 8
Epson PowerLite Cinema 550 Projector Status Lights If your projector isn't working correctly, first turn it off, wait for the warning light to turn a steady orange, turn off the power switch on the back, and unplug it. Then plug the power cord back in and turn on the projector. If this doesn't - Epson PowerLite Cinema 550 | Product Information Guide - Page 9
. ❏ The projector's warning light flashes red at half-second intervals. ❏ The message Replace the lamp appears on the screen when you start projecting. Note: Lamp life results will vary depending on the selected mode, environmental conditions, and usage. Purchase lamp part number V13H010L35 from - Epson PowerLite Cinema 550 | Product Information Guide - Page 10
you've used the lamp for at least 10 hours. Related Documentation CPD-20566 Epson PowerLite Cinema 550 User's Guide CPD- 20246 Epson Extra CareSM Home Service warranty Note: Setup instructions are provided in the User's Guide. There is no setup sheet. 10 - Epson PowerLite Cinema 550 11/05
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Epson PowerLite Cinema 550
11/05
Epson PowerLite Cinema 550 - 1
Projector Parts
Projector Specifications
General
Type of display
Poly-silicon Thin Film Transistor (TFT)
active matrix
Size of LCD panels
Wide: 0.7 inches (18 mm)
Lens
F=2.1 to 2.8, f=21.4 to 31.7 mm
Zoom ratio
1:1.5
Resolution
1280
×
720 pixels (720p)
Brightness
1400 ANSI lumens max.
Dynamic contrast
3000:1
ratio
Image size
30 to 300 inches (0.76 to 7.6 m)
Projection distance
2.9 to 44.8 feet (0.9 to 13.7 m) 16:9
3.5 to 54.8 feet (1.1 to 16.7 m) 4:3
Optical aspect ratio
16:9 or 4:3
Keystone correction
±
15° vertical
angle
Noise level
32 dB (Dynamic color mode);
26 dB (Theater Black color mode)
Lamp
Type
UHE (Ultra High Efficiency), E-TORL
Power consumption
170 W
Lamp life
1700 to 3000 hours, depending on
usage
Part number
V13H010L35
Remote Control
Range
30 feet (10 meters)
Battery
AA
×
2
Dimensions
Height
4.9 inches (124 mm)
Width
16 inches (406 mm)
Depth
12.2 inches (309 mm)
Weight
11.5 lb (5.2 kg)
Control panel
Ventilation
slots
Lens cover
Vertical lens
shift dial
Adjustable foot
Infrared
receiver
Horizontal lens
shift dial
Zoom ring
Focus ring
S-Video
port
Input A port
(component)
AC power inlet
Infrared
receiver
Kensington
lock port
®
Trigger
out port
D4 port (used
mainly in Japan)
Video port
Control (RS-232C) port
Input B port
(RGB)
HDMI
port
TM
Power
switch
Power
button
Warning
light
Keystone correction buttons
(correct shape of non-rectangular images)
Source button
(switches input
source)
Esc button
(exits current menu item)
Aspect button
(switches aspect ratio)
Menu button
(displays on-screen menu)
Select button
(selects menu options)
Power
light