Epson PowerLite EB-L210SW Quick Setup
Epson PowerLite EB-L210SW Manual
 |
View all Epson PowerLite EB-L210SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite EB-L210SW manual content summary:
- Epson PowerLite EB-L210SW | Quick Setup - Page 1
sure you read these instructions and the safety instructions in the online User's Guide. Note: Product a laptop, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. Note from supported smartphones, tablets, and laptops. See the online User's Guide for - Epson PowerLite EB-L210SW | Quick Setup - Page 2
the power button twice. 4 Follow the on-screen instructions to set up your projector. If you see a screen a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. settings as necessary. See the online User's Guide for details. 9 When you are finished, - Epson PowerLite EB-L210SW | Quick Setup - Page 3
(Windows only) and operation guide from your product's support page (see "Where to search button to find the projector automatically, click the Manual search button to enter the projector's IP address, the Applications folder. 6 Follow the app instructions to connect your device to the projector. - Epson PowerLite EB-L210SW | Quick Setup - Page 4
would using the remote control. See the online User's Guide for details. Select equipment connected to an HDMI port manuals, get FAQs and troubleshooting advice, or contact Epson. Telephone support To use the Epson PrivateLine® Support service, call (800) 637-7661 (U.S. and Canada). This service
-
1 -
2 -
3 -
4
 |
 |
Microphone
Connect a dynamic microphone to the
Mic
port, using a 3.5 mm mini-jack cable.
3.5 mm mini-jack cable
Video device
Connect multiple video devices and use the
Source Search
button on the
projector or remote control to switch between them. For more information on
playing sound through the projector, see the online
User’s Guide
.
Component video
to VGA cable
3.5 mm
audio cable
RCA video cable
(composite video)
HDMI
cable
RCA audio
cable
Note:
If you connected a streaming device to an HDMI port, you can also
connect it to the projector’s
USB-A
(flat) port for power.
Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s
USB-A
(flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online
User’s Guide
for details.
EB-L210SF/EB-L210SW
Quick Setup
IMPORTANT:
Before using the projector, make sure you read these instructions
and the safety instructions in the online
User’s Guide
.
Note:
Product availability varies by country and region.
Note:
The illustrations show the EB-L210SW, but the steps are the same for all
models, unless otherwise specified.
Connect the projector
Computer
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
VGA cable
USB cable
HDMI cable
HDMI
®
port
Connect one end of an HDMI cable to one of the projector’s
HDMI
ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to one of the projector’s
Computer
ports, and
the other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
Note:
To use the projector’s Computer2 port, change the
Monitor Out Port
setting in the Signal I/O menu. See the online
User’s Guide
for details.
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
7 or later:
After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (
EMP_UDSE.EXE
; only
on first connection). If the software screen does not display automatically, open
My Computer
,
Computer
, or
This PC
, then double-click
EPSON_PJ_UD
.
OS X 10.8.x or higher:
After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection). If the software screen does not display automatically,
double-click
EPSON_PJ_UD
, then double-click
USB Display Installer
.
Screen mirroring
You can use Miracast
®
to send images to your projector from supported
smartphones, tablets, and laptops. See the online
User’s Guide
for details.
External monitor and speakers
You can connect an external monitor and external speakers to your projector to
enhance your presentations. See the online
User’s Guide
for details.
Wired network
Connect the projector to your network using an Ethernet cable. See “Wired
network configuration” on the back of this sheet for more information.
Ethernet cable