Epson PowerLite Home Cinema 3010e Start Here
Epson PowerLite Home Cinema 3010e Manual
 |
View all Epson PowerLite Home Cinema 3010e manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite Home Cinema 3010e manual content summary:
- Epson PowerLite Home Cinema 3010e | Start Here - Page 1
PowerLite® Home Cinema 3010/3010e Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height where its lens is centered between the top and bottom of the screen. If this isn't - Epson PowerLite Home Cinema 3010e | Start Here - Page 2
the remote control, see the online User's Guide. Project wirelessly (PowerLite Home Cinema 3010e only) Follow these steps to use the included WirelessHD Transmitter (PowerLite Home Cinema 3010e only) to wirelessly transmit HD content to your projector. 6 Your projector automatically adjusts - Epson PowerLite Home Cinema 3010e | Start Here - Page 3
, including interference that may cause undesired operation. Trade Name: EPSON Type of Product: LCD Projector Model: H421A/H450A Marketing Name: PowerLite Home Cinema 3010/PowerLite Home Cinema 3010e Trade Name: EPSON Type of Product: WirelessHD Transmitter Model: AW-WH036TU/AW-WH036TE - Epson PowerLite Home Cinema 3010e | Start Here - Page 4
applies only to the projector and not to the projector lamp, which carries a limited warranty period of ninety (90) days from the date of original purchase. For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: If your product requires
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Choose a location
Keep the projector level and place it at a height where its lens is centered
between the top and bottom of the screen. If this isn’t possible, use the
horizontal keystone slider and keystone correction buttons to reposition the
image (see “Adjust the image”).
In order to view 3D images correctly, 3D glasses must be worn within proper
range of the projector. Use the image below to determine the ideal distance for
3D projection (the shading represents the 3D viewing area):
60º
16.5 ft (5 m)
13 ft (4 m)
Use the optional external 3D emitter if the projector is located over
16.5 feet (5 m) from the viewing area. See “Optional accessories” on the back
of this sheet for ordering information, and the online
User’s Guide
for more
information on where to place your projector.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide
for details.
Video Device
Connect up to 5 video devices and use the
Source
buttons on the projector or
remote control to switch between them.
Component video cable
Audio cable
RCA Video cable
Audio cable
HDMI cable
Computer
VGA cable
HDMI cable
Monitor Port
Connect one end of a VGA cable to the projector’s
PC
port, and the other end
to your computer’s
monitor port. If you are using a laptop, switch it to
external display (see “Troubleshooting”). You can also connect an audio cable.
HDMI Port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Camera or USB Device
Connect a digital camera, USB flash drive, or USB storage device to the
projector’s
USB port.
USB port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s Slideshow feature to project images. See the online
User’s
Guide
for details.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
power button on the projector turns blue.
3
Remove the lens cap.
4
Press the
power button on the projector or
On
button on the remote
control. The power
light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button on the
projector twice or the
Standby
button on the remote control, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select your language
and press
Enter
. Press the
Menu
button to exit the menu system.
PowerLite
®
Home Cinema 3010/3010e
*412153700*
*412153700*