Epson PowerLite S27 User Manual
Epson PowerLite S27 Manual
 |
View all Epson PowerLite S27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite S27 manual content summary:
- Epson PowerLite S27 | User Manual - Page 1
PowerLite® S27/X27/X29/W29 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Note: Your product may differ from the illustrations on this sheet, but the instructions are the same. Connect the projector Choose from the following connections - Epson PowerLite S27 | User Manual - Page 2
X27/X29/W29 PowerLite S27 4 Turn the focus ring to sharpen the image. Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. Project wirelessly Follow the - Epson PowerLite S27 | User Manual - Page 3
software" for additional instructions. Project over a wired network (PowerLite X27/ X29/W29) Follow the steps here to configure your projector for your wired network using the projector's menu system. 1 Plug in and turn on the projector. 2 Press the Menu button on the remote control, select the - Epson PowerLite S27 | User Manual - Page 4
connection). If you don't have icons to the manuals, you can install them from the projector CD or go to the Epson website, as described below. Telephone support services To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Note:
Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Computer
HDMI cable
VGA cable
Audio cable
USB cable
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
XP or later
: After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (
EMP_UDSE.EXE
; only
on first connection). If the software screen does not display automatically, open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
OS X 10.5.8 or higher
: After turning on the projector, the setup folder for USB
Display appears in the Finder. Double-click
USB Display Installer
and follow
the on-screen instructions to install the Epson USB Display software (only on
first connection).
Computer port
Connect one end of a VGA cable to the projector’s
Computer1
or
Computer2
port, and the other end to your computer’s
monitor port. If you are using
a laptop, switch it to external display (see “Troubleshooting”). You can also
connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Wired network
You can connect the projector to your network using an Ethernet cable
(PowerLite X27/X29/W29).
See “Project over a wired network” for instructions.
Video device
Connect multiple video devices and use the
Source Search
button on the
projector or remote control to switch between them.
Audio cable
Component video to VGA cable
S-Video cable
Audio cable
HDMI cable
RCA video cable
Camera, USB device, or Epson DC-06 document
camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector’s
USB-A
(flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online
User’s Guide
for details.
External monitor and external speakers
You can also connect an external monitor or external speakers to your projector
to enhance your presentations. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
power light on the projector turns blue.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button on the projector or remote control. The
projector beeps, and the
Status
light flashes blue and then stays on.
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the
Menu
button on the projector or remote control.
Select
Extended
and press
. Select
Language
and press
. Select
your language and press
. Press the
Menu
button to exit the menu
system.
PowerLite
®
S27/X27/X29/W29