Epson Stylus Pro 7900 Proofing Edition Quick Reference Guide
Epson Stylus Pro 7900 Proofing Edition Manual
 |
View all Epson Stylus Pro 7900 Proofing Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Stylus Pro 7900 Proofing Edition manual content summary:
- Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 1
Epson Stylus® Pro 7900/9900 QUICK REFERENCE GUIDE - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 2
Printer Parts Front Roll paper holder Front cover Ink bay Paper basket Back Interface connector for optional equipment USB interface Roll paper cover Control panel Ink bay Casters Network interface AC inlet Maintenance tank (Pro 9900 includes two tanks, one on each side of printer) 1 - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 3
paper cover. 2 Push down the lock lever, then move the roll paper holder to the left. 5 Push the adapters into the paper core at both ends of the roll. Then push down the tension levers to secure them. 6 Move the roll paper all the way to the right. 3 Place the roll paper on top of the printer - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 4
(ePlaten) button. 15 Press the Pause/reset button. 16 Check the printer's control panel and select the correct media type. Removing Roll Paper 1 Open the roll paper cover. 2 Press the Paper release (ePlaten) button. The paper rewinds automatically. 3 Push down the lock lever. Then move the roll - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 5
again. • OFF-The printer will not perform automatic nozzle checks and cleaning cycles. Note: You can also run nozzle checks and head cleaning cycles from your computer using the Epson Printer Utility3 (Macintosh®) or the Utility tab in your printer driver (Windows). See your Printer Guide for more - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 6
is finished, print the nozzle check again to confirm that the head is clean. Aligning the Print Head If your prints look grainy or blurry, or you see misregistration or "ghosting," you need to align the print head. 1 Make sure the printer is turned on. Load Epson Enhanced Matte paper. (You can also - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 7
printer is on. 1 Press the button to release the ink cover. If necessary, select the ink bay for the cartridge you want to replace, then press OK. 2 Open the ink cover all the way. Ink gauges for 11 cartridges listed below Maintenance tank gauges (one tank for Pro 7900) Replacing Ink Cartridges - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 8
then reinserting it. 7 Close the ink cover. 6 Hold the cartridge with the arrow mark pointing toward the printer. Then insert the cartridge into the slot. Don't force it. Replacing Printer Parts Replacing the Paper Cutter If you notice that the paper isn't cut cleanly, you may need to replace the - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 9
Tank The Pro 7900 has one maintenance tank (on the right side) and the Pro 9900 has two (one on either side). You need to replace the maintenance tank (part # C12C890191) when you see MAINTENANCE TANK FULL on the LCD, the icon has an X, and the printer won't print. 1 If you have the Pro 9900, check - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 10
button to access the menus. See the on-screen User's Guide for details. Menu PRINTER SETUP Item PLATEN GAP PAGE LINE ROLL PAPER MARGIN PAPER SIZE CHECK PAPER SKEW CHECK REFRESH MARGIN AUTO NOZZLE CHECK PRINT NOZZLE PATTERN INITIALIZE SETTINGS Settings / Explanation STANDARD, NARROW, WIDE, WIDER - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 11
is loaded OFF, ON From 15 to 300 ft From 4 to 50 ft Media type loaded in the printer Paper No 1 to 10 Photo, Proofing, Fine Art, Matte, Plain, Others STANDARD, NARROW, WIDE, WIDER PRINT -0.70% to 0.70% 0.0 sec. to device alignment Displays version of the take-up reel installed (Pro 9900 only) 10 - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 12
to epson.com/support to download drivers and firmware, access product documentation and troubleshooting, and get technical advice through e-mail. Support for non-Epson RIP Contact the RIP manufacturer. Web-based printer information management system myEpsonPrinter.com Epson and Epson Stylus are - Epson Stylus Pro 7900 Proofing Edition | Quick Reference Guide - Page 13
Power light and button Pause/reset light and button Ink light Black ink change button Paper feed up button Paper release (ePlaten™) light and button Menu button Paper cut button Ink cover open button OK button Paper feed down button Left arrow or paper source button Printed in USA CPD-26761
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
Epson Stylus
®
Pro 7900/9900
QUICK REFERENCE GUIDE