Epson SureColor F2100 Start Here - Installation Guide
Epson SureColor F2100 Manual
 |
View all Epson SureColor F2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson SureColor F2100 manual content summary:
- Epson SureColor F2100 | Start Here - Installation Guide - Page 1
Epson® SureColor® F2100 Series Start Here Read these instructions before using your product. Choose a Location for the Printer Choose a location for the printer that is near a wall outlet where the plug can be easily unplugged. Avoid places subject to rapid changes in temperature and humidity. - Epson SureColor F2100 | Start Here - Installation Guide - Page 2
need to be shaken on both sides. You do not need to shake the cleaning cartridge. Color ink cartridges White ink cartridges Note: Do not throw the caps away; you will need them when disposing of the waste ink. 5 Place the caution label for your language over the English label, if necessary - Epson SureColor F2100 | Start Here - Installation Guide - Page 3
10 Install the ink charging unit and push it down until it clicks into place. Press the OK button. 11 Close the printer cover. Press the OK button. Install Software & Drivers 1 Go to www.epson.com/support/f2100 (U.S.) or www.epson.ca/support/f2100 (Canada) to download the software and utilities. - Epson SureColor F2100 | Start Here - Installation Guide - Page 4
Product Support Online User's Guide Instructions for using your printer and maintenance tools. On-screen help with your software Select Help or F1 when you're using your Garment Creator software. Epson technical support Visit www.epson.com/support/f2100 (U.S.) or www.epson.ca/support/f2100 (Canada)
-
1 -
2 -
3 -
4
 |
 |
Epson
®
SureColor
®
F2100 Series
Start Here
Read these instructions before using your product.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the plug can
be easily unplugged. Avoid places subject to rapid changes in temperature and
humidity. Also keep the printer away from direct sunlight, strong light, or heat
sources.
Make sure to place the printer on a flat, stable surface with enough space on
all sides (see illustrations below). The surface supporting the printer should
be wider than the space between the rubber feet on the bottom of the printer,
at least 2 feet (60 cm) off the ground, and capable of supporting at least 220
pounds (100 kg).
1.26 in.
(3.2 cm)
23 in.
(58.5 cm)
28 in.
(71.1 cm)
29.53 in.
(75 cm)
2.95 in.
(7.5 cm)
78.74 in.
(200 cm)
23.62–31.50 in.
(60–80 cm)
2.55 in.
(6.5 cm)
19.68 in.
(50 cm)
47.24 in.
(120 cm)
5.90 in.
(15 cm)
Unpack
1
Make sure you have these items:
Maintenance kit
Platen hoop
hooks
Medium platen
and hoop
Waste ink
bottle holder
Grip pad
Waste ink bottle
Limited
warranty
Caution
label
Grip pad tool
Power cord
Tube/cable clamps
Tweezers
Printer
Ink charging unit
Waste ink tube
Ink/cleaning
cartridges
Note:
See the online
User’s Guide
for information on installing the grip
pad, using the grip pad tool, installing the platen hoop hooks, and using the
maintenance kit and tweezers.
2
Remove all the packaging materials and tape. Check carefully for all the
tape inside and outside the printer and platen.
WARNING:
The printer weighs about 185 pounds (84 kilograms) and
requires three people to lift and move it. Make sure to grip the printer where
indicated by the gray stickers as shown in the illustration. When moving the
printer, do not tilt it more than 10 degrees.
Stickers
3
Remove the carriage lock and store it in a safe place.
Note:
Do not throw the carriage lock away; you will need it if you transport
the printer.
4
Open the printer cover and press down on the parts as shown to make
sure they are secure. Then close the printer cover.
Assemble the Printer
1
Remove the plugs from the waste ink outlets on the back of the printer
and store them in a safe place.
Note:
Do not throw the plugs away; you will need them if you transport the
printer.
2
Connect the waste ink tube. Make sure that the longer end of the tube
is connected to the waste ink outlet on the left side and the shorter end
is connected to the waste ink outlet on the right side.
Note:
Make sure the tubes point downward and are not twisted to ensure
proper ink drainage.